Loading ...
Loading ...
Loading ...
Cup shelves
Folddowntheextra shelfonthe leftor rightsideofthe top rack
to holdadditionalcups,stemwareor longitemssuchas utensils
and spatulas.
Acljustable 2-posiUon top rack
You can raise or lower the top rack to fit tall items in either the top
or bottom reck. Raise the top rack to accommodate items up to
9 in (23 cm) in the top rack and 13 in (33 cm) in the bottom reck,
or lower the top rack to accommodate items up to 11 in (28 era)
in both the top and bottom racks. Adjusters are located on each
side of the top rack.
Rexible tines
The row of tines on the left and right sides of the top rack can be
adjusted to make room for a variety of dishes.
To adjust the Flexible tines
1. Gresp the tip of the tine that is in the tine holder.
2. Gently push the tine out of the holder.
3. Lay the tines down, toward the center of the reck.
No-flip clips
The no-flip clips hold lightweight plastic items like cups, lids, or
bowls in place during washing.
To raise the top rack
Lift the rack on either, or both, sides until the rack is level.
NOTE: The top rack adjusters MUST be level.
To lower the top rack
Press both rack adjusters and slide the rack back to its
original position.
Loading the BoSom Rack
The bottom rack is designed for plates, pans, casseroles, and
utensils. Many items, up to 13 in (33 cm), tall fit in the bottom
rack. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
To move a clip
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
l
10 place setting
Do not load glasses, cups, or lightweight plastic items in the
bottom rack. Load small items in the bottom rack only if they
are secured in place.
Load plates, soup bowls, etc., between tines.
Overlap the edges of plates for large loads.
9
Loading ...
Loading ...
Loading ...