Loading ...
Loading ...
Loading ...
The operation of any lawn
mower can result in foreign
objects thrown into the eyes,
which can result in severe eye damage.
Always wear safety glasses or eye shields
while operating your lawn mower or
performing any adjustments or repairs.
We recommend a wide vision safety mask
over spectacles or standard safety
glasses.
HOWTO USEYOUR LAWN MOWER
ENGINE SPEED
The engine speed is controlled by a
throttle located on the side of the upper
handle. Fast position isfor starting,
normal cutting, tdmming and batter grass
bagging. Slow position is for light cutting,
trimming and fuel economy.
ENGINEZONECONTROL
_I_CAUTION: Federalregulationsrequire
an enginecontrolto be installedon this
lawn mowerin orderto minimizethe dsk
ofbladecontactinjury.Do notunderany
circumstancesattemptto defeatthe
functionof theoperatorcontrol.The blade
turnswhenthe engineis running.
• Yourlawnmowerisequippedwithan
operatorpresencecontrolbarwh_h
requirestheoperatortobepositioned
behindthelawn mowerhandletostartand
operatethelawnmower.
TO ADJUST Ct.rl'nNG HEIGHT
• Raise wheelsfor lowsut and lowerwheels
for highcut.
•Adjustcuttingheightto suityour require.
merits. Medium positionisbestfor most
lawr_.
• To changecuttingheight,squeezeadjuster
levertowardwheel. Move wheel upor
downto suityourrequirements. Be sure all
wheelsare inthesame setting.
NOTE: Adjuster is properly positioned
when plate tab inserts into hole in lever.
Also, 9-position adjusters (if so equipped)
allow lever to be positioned between the
plate tabs. PlateTab
/
LowerWheelsfor HighCut _,,w
ver
RaiseWheelsforLowCut
TOA'I'FACHGRASSCATCHER
•Liftthe reardoorofthelawn mower
and place thegrasscatcherframe
hooksontothe doorpivotpins.
•The grasscatcherissecuredto the
lawnmower housingwhen the rear
doorisloweredontothegrasscatcher
frame.
ACAUTION: Do not runyourlawn
mowerwithoutclippingdeflectoror
approved grasscatcher inplace. Never
attempttooperatethe lawn mowerwith
the rear doorremovedor open.
Grass
catcher
handle
Pivot
pins frame hook
7
Loading ...
Loading ...
Loading ...