Loading ...
OPENING AND CLOSING SAFE WITH PIN CODE
1. E
nter the registered PIN Code and press “ # ” to
confirm.
2. When the green light is on, turn the handle clockwise
to the unlocked position and pull safe door open.
Close
Close the safe door and turn the handle counter-
clockwise to the locked position.
If a red light turns on
while accessing and using the safe, this
indicates that the batteries are low, please replace battery as
soon as possible.
The safe may be mounted down to the floor. Beware of the load
bearing. Failure to do so can result in personal injury and/or
damage to property. Use appropriate tools when performing
work and always use eye protection.
Floor Mounting
− Use proper drill tools depending on the type of floor you are
mounting the safe (wood, tile, concrete).
− Measure the location of the pre-set drill holes; mark their
exact position onto the floor.
− Drill the appropriate size holes for the anchors you are using.
− Carefully press the anchors into the holes at this time.
− Mount the safe by running screws from the inside of the safe
and securing to anchors; ensure the safe is mounted
securely.
BC371 11/19
1 YEAR LIMITED WARRANTY
FIRE SAFE VAULTS
BARSKA warrants this new safe to be free of original defects
in material and/or workmanship under normal use for a
period of twelve (12) months from the date product is
received by purchaser. This warranty does not include
damage caused by improper installation or maintenance.
Damage from misuse, abuse, accident (such as dropping),
fire, flood, or acts of nature. Damage from service or repairs
other than those performed by BARSKA. Labor, cost and
shipping charges for the removal and replacement of
defective parts beyond the initial twelve-month warranty
period. All transportation and shipping charges. Removing or
altering the seal under any circumstances will automatically
void the warranty.
This warranty is limited to original purchaser and is not
transferable. This warranty applies only to products
purchased in the United States.
Please email [email protected] or call 1.888.666.6769 for
Return Merchandise Number (RMA#) before any returns. The
RMA number must appear on the outside of the shipping
package. Product must be packed carefully and sturdily in its
original packaging to prevent damage in transit and returned
freight pre-paid to:
BARSKA OPTICS
Repair Department
855 Towne Center Drive
Pomona, CA 91767
Please include all of the following when returning BARSKA
products for service and/or replacement:
1. Please write your complete details (Name, Address,
Telephone #, E-mail address, RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
*Please allow 6-8 weeks for delivery.
BARSKA will examine and test returned product and repair or
replace defective part(s) or units with new part(s) or a new
unit if necessary within the warranty period.
If repair is required after warranty period expiration,
purchaser will be charged for replacement parts and return
shipping.
BARSKA® Optics shall not be liable for any consequential,
incidental and/or contingent damages whatsoever. We will
not pay shipping, insurance or transportation charges from
you to us, or any import fees, duties and or taxes. This
warranty supersedes all previous BARSKA®
warranties.
- CARE AND MAINTENANCE
- Keep liquids away from the control panel. Spills on the
control panel will cause damage and possibly electric shock.
- Secure safe in a proper area to prevent from falling and
causing damage or injury.
- DO NOT disassemble the product. For all repairs and
maintenance, contact BARSKA Customer Service.
- DO NOT use chemicals or cleaning agents to clean the safe.
LOW BATTERY WARNING
MOUNTING INSTRUCTIONS
RESET TO FACTORY DEFAULT MODE
LOCK OUT MODE
Press hold the reset button until one beep and yellow light
turns on.
The safe is in factory default mode after reset; Factory PIN
Code: 123456.
After 3 consecutive incorrect PIN Code attempts, safe will
be in lock-out mode with beeping sound for 20 seconds.
You can enter the correct PIN Code after the lock-out
mode.
Open