Loading ...
Loading ...
Loading ...
8
Troubleshooting
Questions Answers
The appliance does
not produce any
steam.
Fill the water tank to above the MIN line. Press and hold the steam
trigger until steam comes out. It may take up to 30 seconds until
steam comes out.
Press the steam trigger and keep it pressed when you iron.
The iron leaves a
shine or an imprint
on the garment.
The surface to be ironed was uneven, for instance because you were
ironing over a seam or a fold in the garment.
The ironing board
cover becomes wet
or water droplets
come out of the
soleplate.
Steam has condensed on the ironing board cover after a long
ironing session.
There is too much
steam coming out of
the iron.
The default setting of the iron represents the optimal temperature.
In this setting, the iron gives off a high steam output.
Ironing tips:
• When ironing a garment that consists of multiple fibre types it is recommended to use the
lowest heat setting.
• Velvet and other textures that rapidly become shiny should be ironed in one direction with
light pressure applied.
• Always keep the iron moving to prevent overheating of the fabrics.
• Pure woollen fabrics (100% wool) may be ironed with the iron set to the steam position.
• To prevent staining, do not spray water straight on silk or other delicate fabrics.
Loading ...
Loading ...
Loading ...