Loading ...
Loading ...
Loading ...
5
Warning:
Never place a television set in an unstable location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly to children, can be avoided by taking simple
precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television set.
- Only using furniture that can safely support the television set.
- Ensuring the television set is not overhanging the edge of the supporting furniture.
-
Not placing the television set on tall furniture (for example, cupboards or bookcases) without
anchoring both the furniture and the television set to a suitable support.
-
Not placing the television set on cloth or other materials that may be located between the
television set and supporting furniture.
-
- NEVER place items that might encourage children to climb, such as toys and remote controls,
on the top of the television or furniture on which the television is placed.
- ALWAYS route cords and cables connected to your television so they cannot be tripped over,
pulled or grabbed.
Educating children about the dangers of climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained and relocated, the same considerations as
above should be applied.
Step 1 Set up your TV
Ready for the step-by-step? You’re only minutes away from TV bliss!
Warning: To avoid the danger of suffocation, keep plastic packaging away from babies, children,
and pets. Do not use packaging bags in cribs, beds, carriages, or playpens.
Remove your TV from the box
Be careful, it’s heavy!
Note: We recommend having three (3) people help to safely install the stands. While two (2)
people securely hold the TV upright, another person should install the stands. Make sure
the installation direction of the stand is the same as illustrated.
Please remove the
protective film after installation.
Take the TV stands from the accessory bag and remove the cable covers as illustrated.
A
Carefully remove the foam packaging on the left and right sides of the TV. Keep the bottom
foam packaging attached as shown. Carefully align the stands with the screw holes located
on the TV. Secure the stands with 6 M5x25mm screws from the accessory bag. You have two
options to install the table stand at a higher or lower position. Dig out the plastics in screw
holes by a screwdriver before installing the table stands at a lower position.
B
Route the cables and install the cable covers as illustrated.
C
Stand installation is completed.
D
To use the stand
A
C
D
B
or
Higher position Lower position
Loading ...
Loading ...
Loading ...