Loading ...
Loading ...
Loading ...
5
Choose an appropriate location for the unit:
• Within an area of the house where the ambient temperature is kept between 50°F and 160°F;
• Away from living areas (dining room, living room, bedroom), if possible;
• So as to provide easy access to the interior cabinet for maintenance, and to the control panel on the side of the unit;
• Close to an exterior wall, so as to limit the length of the insulated flexible ducts to and from the unit;
• HRV units only: close to a drain. If no drain is close by, use a pail to collect run-off;
• Away from hot chimneys, electrical panel and other fire hazards;
• Within 6 feet of a power source (standard outlet).
Suspended to the joists or trusts:
• Hang the unit to the joists (or trusts) using the provided chains. Springs are not required.
• Always make sure that the unit is no more than 1/4" off level.
• If required, rotate both backdraft dampers to make sure they are positioned in such a way
that the word "TOP" is up and that gravity allows them to close properly.
OR
Wall mounted:
• Using the provided no. 8 x 3/8" screws, install both provided brackets on the unit − one on
top, one at the bottom of the unit.
• Using the provided no. 8 x 1½" screws, secure the unit to the wall making sure that all
screws engage into a stud.
• Always make sure that the unit is no more than 1/4" off level.
• If required, rotate both backdraft dampers to make sure they are positioned in such a way
that the word "TOP" is up and that gravity allows them to close properly.
VD0433
Make sure that "TOP" engraving is
up. Rotate if necessary.
Assurez-vous que la gravure «HAUT» est
vers le haut. Tournez si nécessaire.
Make sure that "TOP" engraving is
up. Rotate if necessary.
Assurez-vous que la gravure «HAUT» est
vers le haut. Tournez si nécessaire.
ROTATE BOTH
DAMPERS INSIDE
THEIR PORT
2.1 LOCATING AND MOUNTING THE UNIT (CONT’D)
Loading ...
Loading ...
Loading ...