Loading ...
Loading ...
Loading ...
22
BATTERY PACK AND CHARGER
CHARGING THE BATTERY PACK
If any part of the charger is missing or damaged, do not operate it! Replace the charger with a new one.
Failure to heed this warning could result in possible serious injury.
Check the voltage! The voltage must comply with the information on the rating label.
1. Align the slot of the battery pack with the rail on the charger. Slide the slot onto the rail until the battery
pack secures into place. Connect the second battery in the same way (Fig. 11).
2. Connect the charger to the power supply.
$OORZVXI¿FLHQWFKDUJLQJWLPHVHH6SHFL¿FDWLRQVDQGWKHQGLVFRQQHFWWKHFKDUJHUIURPWKHSRZHUVXSSO\
4. Press the release buttons on the battery packs and remove them from the charger.
NOTE: It is normal for the battery pack and the charger to become warm (but not hot) during charging
process. If the battery does not charge properly, check to make sure the electrical outlet is operational. Always
charge the battery before storage!
Fig. 11
WARNING
Loading ...
Loading ...
Loading ...