CR1-0225-76 OWNER’S GUIDE

Loading ...

English 11

WARNING: To reduce the risk of electrical shock and injury to persons,

unplug the circulator before removing grille.

POSSIBLE CAUSE AND SOLUTIONPROBLEM

Unit is not plugged in. Plug Power Cord into electrical outlet.

Ensure unit fan speed setting is selected.

Plug fuse has blown. Replace fuse (See USER SERVICING

INSTRUCTIONS).

Unit is damaged or in need of repair. Cease usage and unplug.

Contact Consumer Service for assistance.

The outlet is worn or damaged. Try another outlet or contact a

qualied electrician.

Unit set to a low speed setting. Adjust to a higher speed setting.

Airow is blocked. Remove obstruction.

Adjust direction of airow towards the user.

Under certain conditions, it is possible for a reset GFCI (Ground

Fault Circuit Interrupter) outlet to trip when the user is changing

speeds on a Vornado circulator. In this event, change to an outlet

that is not connected to a GFCI device. It could also indicate a

weak or defective GFCI outlet. Contact a qualied electrician to

check the GFCI outlet.

The unit fails to

power on.

Airow is weak

orslow.

GFCI has tripped.

TROUBLESHOOTING