Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/97320901-an-1500/bgd.png)
— 13 —
Installation
STEP 10
Mount Range Hood onto Wall
• Hang the range hood on the hooks of the hood
mounting bracket. (See Figure #3)
• Screw the range hood to the wall.
CAUTION - Make certain the range hood is
secure before releasing!
STEP 9
Venting
• Fix the damper on the top vent of hood with 4 screws (C).
(See Figure #2)
• If ventilation system is equipped with an external air
duct with a different diameter, apply a reduction tting.
However, for maximum performance and safety, a 6 in.
round ducting is recommended.
Fig #2
Fig #3
STEP 11
Connect Ductwork
• Attach ductwork to damper. Secure the ductwork with duct tape to make sure joints are secure and air- tight.
• Donotinstalltheducttapetootightlyasthismaypreventthedamperapsfromopeningwhichwilloverworkthemotor
and cause improper functioning of the unit.
• Fasten all connections with sheet metal screws and tape all joints with certied aluminum or foil tape. Use caulking to
seal exterior wall or roof opening around the cap.
STEP 12
Install Chimney
• Place chimney on top of the main housing.
• Remove the protective coating from the upper chimney. Carefully slide the
upper chimney down into the lower chimney. Make sure upper chimney is
moving freely.
• Use two (2) screws (D) to x lower chimney to range hood (Figure #4).
Fig #4
Loading ...
Loading ...
Loading ...