Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone G1A1 Pro
User Manual
Caring For Your SYNCO Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians
if any malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Package List
RX Receiver x1 TX Transmitter x1 Carring & Charging Box x1
Type-C to Type-C Cable x1 External Lav Mic (With Wind Mu) x1
3.5mm TRRS Phone Cable x1 3.5mm TRS Camera Cable x1
Mic Windshield x1 Type-C to USB-A
Adapter X1
User Manual X1
Product Instruction
TX Transmitter
RX Receiver
① Type-C Charging Port / Digital
Output
② On/ O Button (Mono / Stereo /
Protected Channel)
③ 3.5mm TRS Output
④ 3.5mm Monitoring Port
① External Mic Input
② Type-C Charging Port
③ On/ O Button
④ Built-in Mic
⑤ Power Indicator
⑥ Paring Indicator
⑦ Noise Reduction
⑧ Gain Adjustment of TX
⑨ Magnet Pocket Clip
⑩ Contacts
⑤ Power Indicator
⑥ Paring Indicator
⑦ Gain Adjustment of TX A
⑧ Gain Adjustment of TX B
⑨ Magnet Pocket Clip
⑩ Contacts
Indicator - TX
Indicator - RX
Carrying & Charging Case
① Contacts ② Power Indicator ③ Type-C Port
Unpaired
Unpaired
Blue Slow Flashes
Blue Slow Flashes
Paired ( with Mute & Noise
Reduction o )
Protection Channel Mode
( R channel with less than 6dB)
Blue Keeps on
Blue & Red Both on
Pairing
Indicator
Pairing
Indicator
Power
Indicator
Power
Indicator
Mute on
Paired ( Mono Channel )
Red Keeps on
Blue Keeps on
Noise Reduction on
Stereo Mode
Blue & Red Both on
Red Keeps on
Charging ( Turns o when fully
charged )
Charging ( Turns o when fully
charged )
Green Keeps on
Green Keeps on
Warning of low battery
Low Battery
Green Flashes
Green Flashes
1. Power On/ O
Power On
Method 1: The TX and RX automatically turn on after taken out from the
charging Case.
Method 2: The TX and RX automatically turn on when long press the
power button for 3 seconds, and the blue status indicator light up.
Power O
Method 1: After put the transmitter/receiver into the charging case, the
green indicator light keeps on for automatic charging. After being fully
charged, the green indicator light will turn o and automatically shut
down.
Operations
Method 2: The TX and RX automatically turn o when long press the
power button for 3 seconds, and the red status indicator light o.
2. Pairing
Automatic Pairing
Automatically pairing after the TX/RX turns on when taken out from the
charging case.
Manual Pairing
(1) Long press the power button for 8 seconds while the TX is powered o
until the blue pairing indicator ashes.
(2) Long press the power button for 8 seconds while the RX is powered o
until the blue /red/ green pairing indicators ashes.
(3) The blue light keeps on when the TX successfully paired. ( And the red,
green and blue pairing indicators on the RX ash for about 1 minute , and
the blue light keeps on when exit the pairing state).
3.Connection
The receiver outputs the audio signal to the recording device via either
a 3.5mm TRRS Phone Cable or a 3.5mm TRS camera cable. Use the
Loading ...
Loading ...
Loading ...
