Loading ...
Loading ...
Loading ...
CHECK the correct voltage before using the machine.Be SURE to operate
with reliable grounded protection connections.
TURN OFF the machine,and then DISCONNECT the power-supply before
replacing the heat units.DO NOT forget to wearing insulated gloves if the unit
is still under high-temperature.
AVOID prolonged burning of the heating parts.If not turning the power
off,please place a hot stamping replacement ( it could be a scrap and can be
used repeatedly ).AVOID damaging the heating units with sharp parts of the
stamping object.
AVOID touching the heating units and the compression spring without
protection in case of potential damage,of body during use.
If it’s hard to pushing the grasp,please adjust the rotation lock screw in order to
reduce the pressure of compression spring.Or, it will damage to the strength of
the machine.
Before lifting the machine,please lock the machine head by rotation lock screw
and loosen the handle(don’t screw the rotation lock screw too tight).Besides,do
not put down the machine beyond the limit.When meeting the falling limit,you
can feel an obvious pressure on the swiveling pressure adjustment wheel.
Keep children away from the machine!!!
DO NOT attempt to press products that are not intended for normal heat
transfer. Baking pads should be avoided of empty burning.
CAUTION
- 15 -