Loading ...
Loading ...
Loading ...
MODELO A20100
Rev. E 4/17
2
2084829 Rev. E 4/17
7
2084829
FUNCIONAMIENTO
1.Cuidadosamente retire el Ventilador de la caja.
2. Instalar pies antes de operar el ventilador. (Figura 1)
A) Engancha la parte delantera del pie en la base.
B) Oprime la parte posterior del pie hasta que encaje
en su lugar.
Nota: Ambos pies son idénticos e intercambiables.
3.Coloque el ventilador sobre una superficie
firme y nivelada.
4. Conecte el cable eléctrico a un tomacorriente
de 120 Vca.
Asegúrese que el enchufe encaje
firmemente en el tomacorriente.
Cuando los enchufes quedan flojos en
los tomacorrientes, pueden deslizarse
parcial o completamente fuera del
tomacorriente con un leve movimiento
del cable adosado. Los tomacorrientes
en este estado podrían sobrecalentarse y representar
un grave peligro de incendio; si está cubierto por una
cortina o tela, el riesgo de incendio es aún mayor.
5. Encienda el Ventilador girando la Perilla de
Encendido / Velocidad. (Figura 2)
6. Ajuste el Ventilador a la velocidad deseada.
3 – Velocidad Alta
2 – Velocidad Mediana
1 – Velocidad Baja
7. Para girar el Ventilador APAGAR, girar la Perilla de
la Poder/Velocidad a APAGAR (0) y quitar la unidad
de la salida eléctrica.
8. Para regular la dirección del flujo de aire, hacer
girar el Cuerpo sobre la Horquilla. (Figura 3)
Figura 2
A
B
Figura 1
Figura 3
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electrical shock and injury to persons, including the following:
Read all instructions before using this Fan.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS
FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
DO NOT use this fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints,
gasoline, varnishes, floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the
containers for these products!
ALWAYS be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the
outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this
condition should be replaced by a qualified electrician.
ALWAYS unplug the power cord when servicing, cleaning or moving the Fan. DO NOT use the ON/OFF switch as the sole
means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and
unplug the Fan when not in use.
BE CERTAIN that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or other power source.
The Blue Plug™ on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be
removed or tampered with. To reduce the risk of fire, electric shock and personal injury, DO NOT attempt to remove, replace,
repair or tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device
incorporated in this plug.
THIS FAN HAS A POLARIZED PLUG (one blade is wider than the other). This plug is designed to fit into the outlet only one
way. Match the wide blade to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety fea-
ture. If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.
• AVOID the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these
devices may overheat and cause a fire hazard.
•DO NOT route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat creating a fire
hazard.
•ALWAYS place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.
•NEVER insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.
•DO NOT block, cover or obstruct air flow to or from the fan while in operation.
•DO NOT use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location
may create a shock hazard.
•DO NOT run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture
or appliances. Arrange cord away from traffic area and where it will not be tripped over.
•NEVER use a single extension cord to operate more than one Fan or other electrical device.
•DO NOT use this Fan if it has been damaged or is not functioning properly.
•THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).This Fan is not suitable for use in agricultural
facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article
547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
•THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008).This Fan is not suitable for use in hazardous
locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical
requirements for hazardous locations.
CAUTION
PARA MONTAR EN LA PARED:
ESTE VENTILADOR se DEBE MONTAR EN UNA SUPER-
FICIE PLANA ESTRUCTURALMENTE SOLIDA.
Sólo uso unas anclas mas covenientes tornillos
para montar este Ventilador. La longitud del tornillo
debe ser lo suficientemente larga para ajustarse al
clavo pared. Si un clavo no puede ser montado ni si el
Ventilador se monta en una pared utilice unas anclas
mas covenientes para este tipo de montaje.
Al montar el Ventilador a la pared, el conjunto de cu-
erda se debe localizar entre el Cuerpo del Ventilador y
la Yunta del Ventilador. (Figura 4)
Yunta De
Ventilador
El Cuerpo De
Ventilador
Figura 4
Conjunto
De Cuerdo
Loading ...