Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com 7
Install Handlebar
• Remove the waterproof plug from the installed handlebar.
• Pull o the assembled handlebar protector, insert it into the
fork hole, adjust the angle (the center point of the handlebar
is perpendicular to the front wheel), make sure you can
insert the handlebar below the safety line into the head
tube of the frame, and lock it tight with hexagonal key.
• Make sure the handlebars are locked tight and do not move
from side to side (the locking torque is not less than 12N.m)
• Put the waterproof plug back in its original position.
• Put the corresponding L/R pedals into the corresponding left
and right cranks, and use a multi-function tool to turn and
lock in the direction of the front wheel (the locking torque is
not less than 45N.m).
• Install the front reector (white) on the handlebar as shown
in the picture, lock it with a screwdriver.
• Install the rear reector (red) on the seat tube as shown in
the picture, and lock it with a screwdriver.
Loading ...
Loading ...
Loading ...