Makita XPP01ZK User Manual

Loading ...

11 ENGLISH

5. Make sure the punch is correctly positioned in the

punch rod and tighten the punch retaining nut rmly with

the nut retaining bar supplied.

► 1. Nut retaining bar 2. Punch retaining nut

3. Loosen 4. Tighten

6. Restore the strippers.

WARNING: If the punch and die are not

the same size or the punch and the die are not

positioned properly, the punch may strike the

die causing both parts to break. In such a case,

pieces ying off from the broken parts may cause

personal injury.

CAUTION: Check the buttery bolts which

hold the stripper regularly to ensure that they are

tight. Loose bolts may cause the stripper to come

off and damage the tool.

Replacing oblong punch

► 1. Stripper 2. Nut and set bolt 3. Punch retaining nut

4. Oblong punch 5. Stepped edge 6. Punch rod

1. Be sure that the punch piston is fully retracted and

remove the strippers to make access to the parts easier.

2. The punch must be removed rst and then the die.

Unscrew the punch retaining nut to remove the punch

and remove the set bolt and the nut to remove the die.

NOTICE: When replacing the punch and the die,

make sure that the correct size, thickness and

hole shape is selected. Shaped punches and dies

must be properly aligned with each other.

3. Secure the oblong die rmly with the set bolt and

tighten the nut.

4. Place the oblong punch into the punch retaining

nut. Position the stepped edge of the oblong punch

properly in the punch piston and hand tighten the punch

retaining nut.

NOTICE: If the stepped edge of the oblong

punch is not properly inserted into the punch

piston, the punch retaining nut cannot be fas-

tened. Make sure the oblong punch is positioned

correctly in the punch rod.

5. Push the oblong punch against the punch rod and

tighten the punch retaining nut rmly with the nut rmly

with the nut retaining bar supplied.