Loading ...
Loading ...
Loading ...
Mounting the Device on a Roll Bar
1 Using a flat head screwdriver or
9
/
32
in. (7 mm) nut driver, loosen the bolt on the roll bar mount until the
ring separates.
2 Place the mount around the roll bar.
3 Tighten the bolt on the mount until the ring is secure.
4 Insert the ball on the Group Ride mount into the double-socket arm .
5 Tighten the knob slightly.
6 If necessary, rotate the Group Ride mount so the Garmin logo faces up, and adjust the mount for better
viewing and operation.
7 Tighten the knob to secure the mount.
8 Press the device into the Group Ride mount until it snaps into place.
9 Connect the Group Ride power cable to the connector on the vehicle wiring harness.
10 Tighten the collar around the connected power cables.
11 Route the power cable along a suitable path in your vehicle, and secure it using the included zip ties.
Installation 5
Loading ...
Loading ...
Loading ...