Loading ...
Loading ...
CHARGING THE BATTERY
The charger included with your Evolve may dier
from what is shown in this user manual. Please
reference the Accessories section of this manual
or contact us at Hoover.com for more information
of your specific charger.
1
Plug the charger into a power outlet.
2
Attach the battery pack to the charger by aligning
the ribs on the battery pack to the grooves in the
charger. Slide the battery pack into the charger.
3
When charging, the lights on the battery will
illuminate to show the state of charge. If the light
on the charger flashes red, there is an error with
the battery or the charger. Try again or call
customer service for support. Once charge is
complete, lights on the battery will turn o.
4
To remove the battery pack from the charger, press
the latches and pull the battery away from the
charger.
TIP
During charging, the pack and ambient
temperature should be between 41°F to 86°F (5°C
and 30°C). The charger will sense if the pack,
or ambient temperature, is too cold or too hot,
and will return an error code (red LED will be on)
and not charge the pack. Use battery only with
charger listed. For use with Hoover® ONEPWR™
Lithium Ion Batteries.
ASSEMBLY
INSTRUCTIONS
FULLY ASSEMBLE PRODUCT PRIOR TO USE.
1
click
Install the wand into the body until it clicks into
place.
2
click
Attach the battery pack by aligning the ribs on the
battery pack to the grooves in the product. Slide
the battery pack into the product until it clicks
into place.
PRODUCT OVERVIEW
1. Comfort Grip
Handle
2. Wand
3. ON/OFF Button
4. Mode Buttons
& LED Mode
Display
5. ONEPWR™
Battery
6. Filter/Separator
Access
7. Easy Empty Dirt
Cup
8. Dirt Cup Empty
Button
9. Hose Release
10. Removable
Brush Roll
1
2
3
4
9
5
6
7
8
10
1. ON/OFF Button
2. Mode Cycle Down
3. Mode Cycle Up
4. Battery LED
1
2
3
4
OPERATION
CAUTION: Use extra care when
cleaning on stairs. To avoid personal injury or
damage, and to prevent the cleaner from falling,
always place cleaner at bottom of stairs or on
floor. Do not place cleaner on stairs or furniture,
as it may result in injury or damage.
CAUTION: Not to be used for
grooming a pet.
Power on/off
Cycle Down
Cycle Up
B attery LED
1
• ON/OFF power button.
• Unit turns on in Default mode.
• To increase runtime for hard floors and
everyday messes.
• To increase suction for more embedded
messes.
• Battery LED is illuminated WHITE when on
and RED when battery is low.
NOTE: Pressing the - or + will decrease or increase
the power level from where it is currently running.
2
Step on the nozzle of the product and pull back
handle to recline and begin cleaning.
MAINTENANCE
This product contains no serviceable parts.
If appliance is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, call customer service at
1-800-944-9200 prior to continuing use.
EMPTYING THE DIRT CUP
WARNING: To reduce the risk of
personal injury - Remove the battery before
cleaning and servicing.
1
Remove the battery pack.
2
Push down the latch on the dirt cup to release.
Rock the dirt cup backwards o the body.
3
Hold the dirt cup over a trash bin and press the
dirt cup release button to empty.
4
To close, push the door until it locks back
into place.
5
Replace the dirt cup by aligning the bottom first
and then rocking it into place.
Loading ...
Loading ...
Loading ...