Loading ...
Loading ...
Loading ...
OPERATION
5
11.FF( ) &12.FB( )
In the radio mode, long press the FF( ) or FB( ) button for more than 2 seconds, the unit will
search the next or previous frequency step by step.
Short press the FF( ) or FB( ) button, the automatic search will start, it will search upward or
downward for the strong signal radio station within the cuttent band. The auto searching will stop
until find a station.
13.BND/AMS
In the USB or SD card mode, press the volume knob to enter the EQ function that the audio
At the radio status,press and hold the VOL button to enter switch state of the US(USA) and EU
(EUROPE) frequency,then rotate the VOL knob to select US frequency or EU frequency,after
selecting US or EU frequency,the system will switch to the selected frequency 3 seconds later.
Loc Loud Stereo Vol
In the radio mode, rotate the volume knob to increase or decrese the volume level of the sound
In radio mode,short press the BND/AMS button repeatedly to select the one of the radio band :
FM 1,FM 2,FM 3, AM1,AM2 in a cycle sequence. When you select a band, the word F1、F2、F3
for FM band, and A1、A2 for AM band will be shown on the LCD display.
to scan each preset station in each band.
BND/AMS button
Press the BND/AMS
check When the 6 strongest stations will be
stored into
14. MUTE
15. AUX IN JACK
16. RESET
To reset all parameters to factory default values. Use a subject with a sharp point end to thrush the RESET
hole.
flash on the LCD
Loading ...
Loading ...
Loading ...