Prestige UGP20VPC1SS 20 Inch Freestanding Gas Range with 4 Sealed Burners, 1.6 cu. ft. Oven Capacity, Storage Drawer, Continuous Grates, Manual Clean, Convection Fan, Automatic Electric-Spark Ignition, 2 Oven Racks, and ETL Listed: Stainless Steel

User Manual - Page 27

For UGP20VPC1SS.

PDF File Manual, 55 pages, Read Online | Download pdf file

UGP20VPC1SS photo
Loading ...
Loading ...
Loading ...
27
ADJUSTING THE TOP BURNER AND OVEN FLAME
Keep appliance area clear and free from combustible materials, gaso-
line, and other  ammable vapors and liquids. Do not obstruct the  ow
of air that is necessary for combustion and ventilation.
Top Burner Valves
Thetopburnershaveoricesthatarededicatedtothetypeoffueltobeused.
Theseoricesarenotadjustable.Theymustbechangedcompletelytoconvert
from one gas to the other. DO NOT DISCARD THE UNUSED ORIFICES. They
should be saved in order to convert the range back to its original fuel.
Whenconvertingthegasvalves,theminimumameadjustmentscrewmustbe
adjusted.
Pleaseseethesuppliedscrewdriverintheconversionkitalongwiththeorices.
Theproperamesizeisapproximately1/4”(0.6cm)obtained.–seeadjustment
procedure below.
Theproperlyadjustedmaximumameisapproximately3/4”(1.9cm)highand
has three distinct cones; the kindling point, the dark blue center cone, and the
outer mantel.
ADJUSTING THE TOP BURNER FLAME
1. Ensure the range has gas supply and power
2. Light the burner
3. Set the top burner valve to the minimum position
4. Remove the knob by pulling straight out
5.Pullinsulationtotheleftofthevalveshafttorevealthebracketscrew(g3.)
6. Remove the screw from the bracket using a Philips screw driver, now you have
full access to the bypass screw
Inserttheatheadscrewdriver
(2.5mm x 75mm - provided) into
the screw hole and turn the by
pass screw clockwise to adjust
theame
Do not overtighten
6. Replace the knob
7. Repeat for each of the other burners
Loading ...
Loading ...
Loading ...