Loading ...
Loading ...
Loading ...
7
• Place Support Base on a flat clean dry surface and make certain the
power button is on the OFF position before plugging into an outlet.
• Place dry Boiler on a flat dry clean counter and fill with water.
• DO NOT fill or refill Boiler when on the Support Base.
CAUTION: Water level must not exceed safety valve.
• Now you may place the filled Boiler on the Support Base, make sure both are dry.
• Switch appliance ON by pressing on the LEFT side of the switch. Light will illuminate
when it is
ON, indicating the heat source is working. Follow Quick Start 4 Steps below.
Or for more details, go to ‘Using Your Moka Espresso Maker’ (Page 8).
Notice: ALWAYS keep the appliance in the OFF position and ALWAYS unplug
from the electrical outlet when done.
CAUTION
: Parts will be HOT!! ONLY USE HANDLE TO
POUR. Do not clean immediately after use. Allow appliance to cool before handling the
‘Boiler’ to clean and dry. Always dry before reassembling the espresso maker and place
back on to the unplugged Support Base.
Fill boiler with
water.
Loading ...
Loading ...
Loading ...