Loading ...
Loading ...
Loading ...
In right earpiece, it has voice
“Connected” and LED goes o
on both earpieces and ashes
once every 10s. You can use
your device to play music or
make calls.
Note
After powering on, if the earphones cannot
nd any previously connected Bluetooth
device, it will automatically switch to pairing
mode.
Turn on the Bluetooth function of
your Bluetooth device.
Pair the earpieces with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
Turn on the Bluetooth function of
your Bluetooth device, select Philips
TAT1215.
The following example shows you how
to pair the earphones with your
Bluetooth device.
Enter the earphones password
“0000” (4 zeros) if prompted. For
those Bluetooth devices featuring
Bluetooth 3.0 or higher, no need to
enter a password.
Philips TAT1215
The right earpiece LED ashes
alternately in white and blue,
and the left earpiece LED is o
for 10s and the blue LED ashes
once.
Pair the earphones with
your Bluetooth device
for the rst time
Auto power on: open the top cover
from charging box, the earpieces
discharged and the blue LED
indicator ashes for 3 times with
“power on” voice prompt;
Manual power on: on both earpieces
press and hold the multi-function
buttons for approximately 3s.
Make sure that the earphones are
fully charged.
Both earpieces are now
powerd on and are paired with
each other.
The earpieces are now in
pairing mode and are ready to
pair with a Bluetooth device
(e.g. a mobile phone)
Blue LED
ashes once
for 10s
LED ashes
alternately in
white and blue
Loading ...
Loading ...
Loading ...