Loading ...
Loading ...
Loading ...
6 to 10
INSTALLATION OF LEGS
LEGS ASSEMBLY:
Mount Legs on bottom of product, the appliance may be further leveled with adjustment in the foot of the leg.
GAS CONNECTION
The gas supply (service) line must be the same size or greater than the inlet line of the appliance. SIERRA
appliances use a ¾” NPT inlet.
Pipe joint compound must be resistive to Natural or LP gas.
For equipment using propane gas do not install supply lines with a diameter less than ½ under any
circumstances.
All connections must be tested with a soapy water solution before lighting any pilots.
The appliance shall be connected to the fuel gas for which it was designed. No attempt shall be made to
convert the appliance from the gas specified on the rating plate for use with a different gas without consulting
the installation instructions, the serving gas supplier, or the appliance manufacturer for complete instructions.
MANUAL SHUT OFF VALVE
This installer supplied valve must be in the gas service line ahead of the appliance regulator in the gas stream
and in a position accessible in the event of an emergency.
Loading ...
Loading ...
Loading ...