Ancona AN-1521 User Manual

Loading ...

— 13 —

Installation

STEP 10

Mount Range Hood onto Wall

• Hang the range hood on the hooks of the hood

mounting bracket. (See Figure #3)

• Screw the range hood to the wall.

CAUTION - Make certain the range hood is

secure before releasing!

STEP 9

Venting

• Fix the damper on the top vent of hood with 4 screws (C).

(See Figure #2)

• If ventilation system is equipped with an external air

duct with a different diameter, apply a reduction tting.

However, for maximum performance and safety, a 6 in.

round ducting is recommended.

Fig #2

Fig #3

STEP 11

Connect Ductwork

• Attach ductwork to damper. Secure the ductwork with duct tape to make sure joints are secure and air- tight.

• Donotinstalltheducttapetootightlyasthismaypreventthedamperapsfromopeningwhichwilloverworkthemotor

and cause improper functioning of the unit.

• Fasten all connections with sheet metal screws and tape all joints with certied aluminum or foil tape. Use caulking to

seal exterior wall or roof opening around the cap.

STEP 12

Install Chimney

• Place chimney on top of the main housing.

• Remove the protective coating from the upper chimney. Carefully slide the

upper chimney down into the lower chimney. Make sure upper chimney is

moving freely.

• Use two (2) screws (D) to x lower chimney to range hood (Figure #4).

Fig #4

Loading ...

Ancona AN-1521 WPS636 36 in. Wall Mount Pyramid Range Hood in Stainless Steel