Hantek DSO5102BM 100MHz, 2 Channel Digital Storage Oscilloscope

Hantek DSO5202P Oscilloscope Owners Manual - Page 12

For DSO5102BM.

PDF File Manual, 78 pages, Read Online | Download pdf file

DSO5102BM photo
Loading ...
Loading ...
Loading ...
Getting Started Guide
DS O5000 Series Digital Storage Oscilloscope User Manual
7
3.3.2
3.3.2
3.3.2
3.3.2 Use
Use
Use
Use of
of
of
of Probe
Probe
Probe
Probe Check
Check
Check
Check Wizard
Wizard
Wizard
Wizard
Every time you connect a probe to an input channel , y ou should use the probe check wizard to
verify that this probe is operating correctly. There are two ways to do this:
1 Use the vertical menu (for example, push the CH1 MENU button ) to s et the Probe option
attenuation factor .
2 Press the PROBE CHECK button to use the Probe Check Wizard and configure the probe
option attenuation factor properly following menu prompts.
3.4
3.4
3.4
3.4 Manual
Manual
Manual
Manual Probe
Probe
Probe
Probe Compensation
Compensation
Compensation
Compensation
Upon the first connection of a probe and an input channel, yo u should manually perform this
adjustment to match the probe to the input channel. Uncompensated or miscompensated probes
may lead to errors or faults in measurement.
To
adjust the probe compensation, follow the steps
below.
1. Set the Probe option attenuation in the channel menu to 10X. Set the switch on the probe to
10X and connect the probe to C hannel 1 on the oscilloscope. If you use the probe hook-tip,
ensure it is firmly insert ed onto the probe. Attach the probe tip to the PROBE COMP
~5V@1KHz connector and the reference lead to the PROBE COMP Ground connector.
Display the channel and then p ress the AUTOSET button .
2. Check the shape of the displayed waveform.
Compensated correctly
Overcompensated
Undercompensated
3. If necessary, use a nonmetallic screwdriver to adjust the variable capacity of your probe until
the shape of the waveform turns to be the same as the above figure . Repeat this step as
necessary. See the figure below for the way of adjustment.
Loading ...
Loading ...
Loading ...