Loading ...
Loading ...
Loading ...
!
4
10
AUTOMATIC DEACTIVATION
This heater is fitted with a safety system that ensures that it switches off
automaticallyafter6hourscontinuousoperation.Thefolloingillthenappear
in the display:
. If desired, you can switch the heater on again by pressing
the
button
(see Section E).
AUTOMATIC CLEANING MODE
When the heater has been burning continuously for two hours at its highest
setting, the burner will automatically start an autoclean procedure. The display
will show the autocleaningcode cl:05 running back to cl:01. The procedure takes 5
minutes, during which the heater will burn at its lowest setting, while the burner
autocleans. When the burner is clean again, the heater will automatically switch
back to the highest setting again.
I CHILDPROOF LOCK / PARENTAL CONTROL
The childproof lock can be used to prevent children accidentally changing the
heater settings. When the heater is burning and the childproof lock is on, the heater
can only be switched off. Other functions are blocked then. If the heater has already
been switched off, the childproof lock also prevents accidental ignition of the
heater.
Activatethechildprooflockbypressingtheappropriatekey and holding
itdonformorethan3seconds.TheKEY-LOCKindicator
will appear on the
informationdisplay(ig.I),indicatingthatthechildprooflockhasbeenactivated.
Sitchoffthechildprooflockbypressingthekey and holding it down for more
than3secondsonceagain.
J THE CORRECT USE OF ‘SAVE’
TheSAVEfunctionallosyoutolimitthetemperature.Whenthisfunctionis
activated, the heater will automatically switch off, when the room temperature exceeds
thesettemperatureby3C.Subseuently,hentheroomtemperaturehasdropped
again to the set temperature, the heater will automatically switch on again.
Activate
theSAVEsettingbypressingtheappropriatekey.TheSAVEindicatorlightill
lightup(ig.J).SitchoffthefunctionbypressingtheSAVEkeyonceagain.
WithouttheSAVEsettingyourheaterillmaintainthesettemperatureby
approimationasell,byadjustingitsheatingcapacity.SAVEisaneconomy
setting, which you can use when, for instance, you are not present in the room
ortokeepitfrost-free.
K
THE ‘FUEL’ INDICATOR
WhentheUELindicatorappears,itmeansthatthereisonlyfuelleftfor10
moreminutes.Thecount-donoftheremainingheatingtimecanbeseeninthe
information display (ig.K).Noyouhavetooptions:
you remove the fuel tank and refill it outside the living room
(Section B) or
you push the button extension .Bypushingthisbutton,theremaining
heatingtimeilletendto60minutes.
The heater will automatically switch back to its lowest position. In the display
thenumber60illappear,hichilldeclineto10.Atthearrivalof10,
you will hear an alarm signal every two minutes, warning you to refill the
removable tank. If you do not react, the heater will extinguish by itself. The
heater will also sound a warning signal, when it switches off. The fuel
indicatorillblink,hilefourlines(--:--)areblinkingintheinformation
display. You can stop this by pressing the
button once more.
Once the heater has used up all its fuel and extinguished, it will take some time,
after the refill, before the heater is completely ready for use again.
L THE ‘VENT’ INDICATOR
When there is insufficient ventilation in the room, the heater shuts off
automatically. When this occurs,
e -1 1isdisplayedandtheVENTindicator
is
blinking(fig.L).Afterimprovingtheventilationoftheroom(e.g.byopeninga
door or window a little more), the heater can be ignited by pushing the
button
again.
Fuel filter
L: A blinking VENT
indicator is a sign
that you need extra
ventilation.
K: When the FUEL
indicator has appeard,
the information display
will show the number of
minutes of fuel left in
the tank.
J: When the SAVE light
lights up, the heater will
automatically switch on
or off in order to remain
within a specified tem-
perature range.
I: When the
mark
appears, the childproof
lock has been activated.
Loading ...
Loading ...
Loading ...