Loading ...
Loading ...
Loading ...
Troubleshooting en
49
Fault Cause and troubleshooting
E:27 lights up. Mains voltage is too low.
This is not a fault on the appliance.
1. Contact an electrician.
2. Have the mains voltage and electrical installation
checked by an electrician.
Another error code
appears on the dis-
play.
E:01 to E:30
A technical fault is present.
1. Press
.
2. Unplug the appliance or switch off the fuse.
3. Wait at least 2minutes.
4. Insert the mains plug of the appliance in a socket
or switch on the fuse.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press
.
‒ Turn off the water tap.
‒ Pull out the mains plug.
‒ Contact Customer Service →Page61 and give
the error code.
Fault Cause and troubleshooting
Tableware is not dry. No rinse aid used or dosage set too low.
1.
Add Rinse aid →Page32.
2. Set the amount of rinse aid to be dispensed.
Selected programme has no drying phase
▶ Select a programme with drying.
Water collects in recesses of the tableware or cutlery.
▶ Position tableware at an angle where possible.
The combined detergent used has a poor drying per-
formance.
1. Use rinse aid to improve drying performance.
2. Use a different combined detergent with a better
drying performance.
Loading ...
Loading ...
Loading ...