TOTO ASIA OCEANIA
PTE. LTD.
10, Eunos Road 8, #12-07, Singapore Post Centre. Singapore 408600.
Phone : +65-6744-6955 Fax : +65-6841-0819 http://asia.toto.com/
TOTO U.S.A., Inc. 1155 Southern Road Morrow, GA 30260
Phone : (770) 282 8686
TOTO ASIA OCEANIA
PTE. LTD.
Middle East Branch LOB19-1701-1702, Jebel Ali Free Zone, P.O. box 261804, Dubai U.A.E.
Phone : +971-4-886-5983 Fax : +971-4-886-5986 http://asia.toto.com/
TOTO ASIA OCEANIA
PTE. LTD.
Manila Representative Office. Unit 1010, 10th Floor Rufino Building, Ayala Avenue cor.V.A.
Rufina Street, Makati City,1226 Philippines.
Phone : +63-2-887-6643 Fax : +63-2-887-4084 http://asia.toto.com/
TOTO LTD.
Bangkok Representative Office G Floor, Q.House Ploenjit Building, 598 Ploenchit Road,
Lumpini, Pathumwan, Bangkok 10330 Thailand
http://www.totobkk.com
TOTO INDIA INDUSTRIES
PVT. LTD
Head office 506, 5th Floor, ASCOT Center, Sahar Airport Road,
Andheri (East) Mumbai 400099, Maharashtra, India.
Phone : +91-22-2832-5741/5742 Fax : +91-22-6725-8780 http://asia.toto.com/
TOTO INDIA INDUSTRIES
PVT. LTD
Delhi Branch 909-909A, 9th Floor, Block-E, International Trade Tower,
Nehru Place, New Delhi 110019, India.
Phone : +91-11-4654-2421 to 26 Fax : +91-11-4654-2430 http://asia.toto.com/
TOTO VIETNAM Co., Ltd.
Ha Noi Branch R. 810, Daeha Business Centre, 360 Kim Ma St., Ba Dình Dist., Ha Noi City
Phone : +84-4-37714354 Fax: +84-4-37714355 http://toto.com.vn
Da Nang Branch 10th Floor, ACB Building, 218 Bach Dang Str., Hai Chau Dist., Da Nang City
Phone : +84-511-3565261 Fax: +84-511-3565262 http://toto.com.vn
Ho Chi Minh Branch R. 1301, Centec Tower, 72-74 Nguyen Thi Minh Khai Str., Dist. 3,
Ho Chi Minh City
Phone : +84-8-38229520 Fax: +84-8-38229522 http://toto.com.vn
•
You are advised to record the following information to allow quick service.
Date of purchase : Name of shop :
Tel : ( )
Date : year month day
Warranty Registration and Inquiry
For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit
our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please
contact TOTO U.S.A. Inc.,
Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300
when calling from outside of U.S.A.
S350e SW584 (TCF4731U)
SW583 (TCF4730U)
S300e SW574 (TCF4721U)
SW573 (TCF4720U)
TCF4732A
TCF4731A
Thank you for your recent purchase of the TOTO Washlet. Please read the enclosed information to ensure the ■
safe use of your product.
Be sure to read this Instruction Manual before using your product and keep it in a safe place for future reference. ■
WASHLET
Instruction Manual with Warranty
2012.6.12
D08706
TOTO ASIA OCEANIA
PTE. LTD.
10, Eunos Road 8, #12-07, Singapore Post Centre. Singapore 408600.
Phone : +65-6744-6955 Fax : +65-6841-0819 http://asia.toto.com/
TOTO U.S.A., Inc. 1155 Southern Road Morrow, GA 30260
Phone : (770) 282 8686
TOTO ASIA OCEANIA
PTE. LTD.
Middle East Branch LOB19-1701-1702, Jebel Ali Free Zone, P.O. box 261804, Dubai U.A.E.
Phone : +971-4-886-5983 Fax : +971-4-886-5986 http://asia.toto.com/
TOTO ASIA OCEANIA
PTE. LTD.
Manila Representative Office. Unit 1010, 10th Floor Rufino Building, Ayala Avenue cor.V.A.
Rufina Street, Makati City,1226 Philippines.
Phone : +63-2-887-6643 Fax : +63-2-887-4084 http://asia.toto.com/
TOTO LTD.
Bangkok Representative Office G Floor, Q.House Ploenjit Building, 598 Ploenchit Road,
Lumpini, Pathumwan, Bangkok 10330 Thailand
http://www.totobkk.com
TOTO INDIA INDUSTRIES
PVT. LTD
Head office 506, 5th Floor, ASCOT Center, Sahar Airport Road,
Andheri (East) Mumbai 400099, Maharashtra, India.
Phone : +91-22-2832-5741/5742 Fax : +91-22-6725-8780 http://asia.toto.com/
TOTO INDIA INDUSTRIES
PVT. LTD
Delhi Branch 909-909A, 9th Floor, Block-E, International Trade Tower,
Nehru Place, New Delhi 110019, India.
Phone : +91-11-4654-2421 to 26 Fax : +91-11-4654-2430 http://asia.toto.com/
TOTO VIETNAM Co., Ltd.
Ha Noi Branch R. 810, Daeha Business Centre, 360 Kim Ma St., Ba Dình Dist., Ha Noi City
Phone : +84-4-37714354 Fax: +84-4-37714355 http://toto.com.vn
Da Nang Branch 10th Floor, ACB Building, 218 Bach Dang Str., Hai Chau Dist., Da Nang City
Phone : +84-511-3565261 Fax: +84-511-3565262 http://toto.com.vn
Ho Chi Minh Branch R. 1301, Centec Tower, 72-74 Nguyen Thi Minh Khai Str., Dist. 3,
Ho Chi Minh City
Phone : +84-8-38229520 Fax: +84-8-38229522 http://toto.com.vn
•
You are advised to record the following information to allow quick service.
Date of purchase : Name of shop :
Tel : ( )
Date : year month day
Warranty Registration and Inquiry
For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit
our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please
contact TOTO U.S.A. Inc.,
Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300
when calling from outside of U.S.A.
S350e SW584 (TCF4731U)
SW583 (TCF4730U)
S300e SW574 (TCF4721U)
SW573 (TCF4720U)
TCF4732A
TCF4731A
Thank you for your recent purchase of the TOTO Washlet. Please read the enclosed information to ensure the ■
safe use of your product.
Be sure to read this Instruction Manual before using your product and keep it in a safe place for future reference. ■
WASHLET
Instruction Manual with Warranty
2012.6.12
D08706
2 3
ReferenceMaintenanceOperationIntroduction
Safety Precautions ..............................4
Operational Precautions ...................11
Parts Names ......................................12
Preparation ........................................16
Changing Settings .............................38
What to Do? .......................................50
If you cannot operate with the remote
●
control .............................................50
Freeze Damage Prevention
●
............51
Long Periods of Disuse
●
...................52
Troubleshooting ................................53
SpeciÞ cations ....................................58
Warranty .............................................60
Basic Operations ...............................18
Automatic Functions (Convenience
Features) ............................................22
Automatic Functions (Cleaning
Features) ............................................24
Temperature Adjustment ..................26
Energy-Saver Features .....................28
Power Plug .........................................32
Main Unit ............................................33
Deodorizing Filter ..............................33
Gap between the Main Unit and the
Toilet Bowl ..........................................34
Gap between the Main Unit and the
Toilet Lid .............................................35
Wand ................................................... 36
Water Filter Drain Valve ....................37
Table of Contents
What functions are available on your product?
Cleaning
Support
Sanitary Toilet
As you move away As you stand up As you approach
A mist is sprayed in the
•
toilet bowl to make it
more diffi cult for dirt to
adhere.
When you sit on
•
the toilet seat, the
deodorizer operates.
The wand is cleaned
•
with "ewater+".
(The wand extends and
then retracts.)
"ewater+" is sprayed
•
in the toilet bowl to
maintain cleanliness.
The available functions vary according to the model.
Model
Functions Part No.
S350e S300e —
SW584
SW583
SW574
SW573
TCF4732A
TCF4731A
Ref.
Page
Basic
Functions
Cleaning
Rear cleansing
●
18
Soft rear cleansing
●
Front cleansing
●
Wide front cleansing
●
Changing the washing method
Wand position adjustment
●
Water pressure adjustment
●
Oscillating cleansing
●
Pulsating cleansing
●
Personal setting lock
●
Drying Warm Air Drying
●
Changing the temperature
Temperature Adjustment
●
26
Convenient
Functions
Opening and closing
Opening and closing the toilet
seat with remote control
●
—
●
18
Auto lid opening and closing
●
—
●
22
Lighting up Soft light
●
—
●
Heating the toilet seat Heated seat
●
—
Saving energy
Timer energy-saver
●
28
Auto energy-saver
●
Sanitary
Functions
"ewater+" sanitizing
Auto wand cleaning
●
24Auto bowl cleaning
●
Removing odors
Deodorizer
●
Maintenance
Main Unit
One-touch removal
●
34
Removable toilet lid
●
35
Wand cleaning
●
36
The self-cleaning functions operate automatically.
(See pages 24 and 25 for details.)
The model name and part number are indicated
on the bottom side of the toilet lid.
2 3
ReferenceMaintenanceOperationIntroduction
Safety Precautions ..............................4
Operational Precautions ...................11
Parts Names ......................................12
Preparation ........................................16
Changing Settings .............................38
What to Do? .......................................50
If you cannot operate with the remote
●
control .............................................50
Freeze Damage Prevention
●
............51
Long Periods of Disuse
●
...................52
Troubleshooting ................................53
SpeciÞ cations ....................................58
Warranty .............................................60
Basic Operations ...............................18
Automatic Functions (Convenience
Features) ............................................22
Automatic Functions (Cleaning
Features) ............................................24
Temperature Adjustment ..................26
Energy-Saver Features .....................28
Power Plug .........................................32
Main Unit ............................................33
Deodorizing Filter ..............................33
Gap between the Main Unit and the
Toilet Bowl ..........................................34
Gap between the Main Unit and the
Toilet Lid .............................................35
Wand ................................................... 36
Water Filter Drain Valve ....................37
Table of Contents
What functions are available on your product?
Cleaning
Support
Sanitary Toilet
As you move away As you stand up As you approach
A mist is sprayed in the
•
toilet bowl to make it
more diffi cult for dirt to
adhere.
When you sit on
•
the toilet seat, the
deodorizer operates.
The wand is cleaned
•
with "ewater+".
(The wand extends and
then retracts.)
"ewater+" is sprayed
•
in the toilet bowl to
maintain cleanliness.
The available functions vary according to the model.
Model
Functions Part No.
S350e S300e —
SW584
SW583
SW574
SW573
TCF4732A
TCF4731A
Ref.
Page
Basic
Functions
Cleaning
Rear cleansing
●
18
Soft rear cleansing
●
Front cleansing
●
Wide front cleansing
●
Changing the washing method
Wand position adjustment
●
Water pressure adjustment
●
Oscillating cleansing
●
Pulsating cleansing
●
Personal setting lock
●
Drying Warm Air Drying
●
Changing the temperature
Temperature Adjustment
●
26
Convenient
Functions
Opening and closing
Opening and closing the toilet
seat with remote control
●
—
●
18
Auto lid opening and closing
●
—
●
22
Lighting up Soft light
●
—
●
Heating the toilet seat Heated seat
●
—
Saving energy
Timer energy-saver
●
28
Auto energy-saver
●
Sanitary
Functions
"ewater+" sanitizing
Auto wand cleaning
●
24Auto bowl cleaning
●
Removing odors
Deodorizer
●
Maintenance
Main Unit
One-touch removal
●
34
Removable toilet lid
●
35
Wand cleaning
●
36
The self-cleaning functions operate automatically.
(See pages 24 and 25 for details.)
The model name and part number are indicated
on the bottom side of the toilet lid.
These precautions are important for safe usage. Be sure to follow them and use the product correctly.
Symbols and meanings
WARNING
May result in death or serious injury.
CAUTION
May result in injury or property damage.
The following symbols are used to indicate important safety instructions for the use of the product.
Symbol Defi nition
This symbol indicates a prohibited use of the product.
This symbol is used to indicate a required step in the use of this product.
WARNING
Do not plug or unplug the power plug with wet hands.
Doing so may cause electrical shock.
•
Do not get any water or cleaning products on the main unit or power plug.
Doing so may cause a fi re, electrical shock, heat or a short.
•
Doing so can cause the product to crack rerulting in injury or water damage.
•
Never disassemble, repair or alter.
Doing so may cause a fi re, electrical shock, heat or a short.
•
Do not install the Washlet on moving vehicles such as RV's or boats.
Doing so could cause a fi re, electric shock, a short or malfunction.
•
The toilet seat, lid, main unit or other part might come loose and fall apart, resulting in injury.
•
Do not use the Washlet if a malfunction occurs.
[USA]
In the following cases, unplug the plug out from the outlet and close the water supply valve.
[Asia, Oceania]
In the following cases, switch the breaker on the distribution board to OFF and close the water
supply valve.
Possible malfunctions:
Water is leaking from a pipe or the main unit
−
The product is cracked or broken.
−
The product makes a strange noise or emits a strange odor.
−
The product emits smoke.
−
The product is abnormally hot.
−
The toilet seat cushion is out of place.
−
Continued use after malfunction could cause a fi re, electrical shock, heat, short, injury or water
•
damage.
4 5
Introduction
Safety Precautions
WARNING
Only use tap water or potable well water (underground water). Do not use
seawater.
Doing so may cause irritation to the skin and malfunction.
•
Do not touch the power plug during thunderstorms.
Doing so may cause electrical shock.
•
Do not allow the water supply hose to touch the power plug or outlet.
Doing so may cause condensation resulting in a fi re, electrical shock, heat or a short.
•
Do not do anything that could damage the power cord, power plug or toilet
seat cord.
Do not strike, yank, twist, excessively bend, damage, alter, or heat the electrical cords. Also, do
not place anything heavy, bind or pinch the electrical cords.
Using a damaged electrical cord may result in a fi re, electrical shock, heat or short.
•
Do not use a loose or faulty electrical outlet.
Doing so could cause a fi re or a short.
•
Do no use any outlet or wiring equipment beyond its specifi ed rating.
Plugging too many plugs into the same outlet, for example using outlet splitters, can cause fi re
•
due to heat.
Do not use any power supply other than the one specifi ed.
[USA]
AC 120 V, 60Hz
[Asia, Oceania]
AC 220 V, 50/60Hz
Doing so could cause a fi re or excessive heat.
•
Do not stick a fi nger or anything else into the warm air outlet.
Do not place anything on the warm air outlet or drape clothes over it.
Doing so could cause burns, electrical shock or malfunction.
•
Beware of low-grade burns
Improper use of heated toilet seats could cause a low-grade burn.
•
When sitting for a long time on the toilet seat, switch the toilet seat temperature adjustment to
"OFF".
When any of the following persons use a heated seat or warm air drying, someone should switch
the toilet seat temperature adjustment to "OFF" and switch the drying air temperature to "Low".
Young children, the aged and other users unable set the temperature appropriately themselves
−
The ill, physically disabled and others who do not have freedom of movement
−
Those using any medicines that cause drowsiness (sleeping medicine or cold medicine), those
−
who have been drinking heavily, anyone severely fatigued and anyone else liable to fall asleep
Always connect the Washlet to the cold water supply.
Connecting to hot water supply may result in burns and equipment damage.
•
Make sure that a properly grounded (3 prong) outlet has been installed.
Failure to install a grounded outlet could cause electrical shock in the event of a malfunction or
•
short circuit.
These precautions are important for safe usage. Be sure to follow them and use the product correctly.
Symbols and meanings
WARNING
May result in death or serious injury.
CAUTION
May result in injury or property damage.
The following symbols are used to indicate important safety instructions for the use of the product.
Symbol Defi nition
This symbol indicates a prohibited use of the product.
This symbol is used to indicate a required step in the use of this product.
WARNING
Do not plug or unplug the power plug with wet hands.
Doing so may cause electrical shock.
•
Do not get any water or cleaning products on the main unit or power plug.
Doing so may cause a fi re, electrical shock, heat or a short.
•
Doing so can cause the product to crack rerulting in injury or water damage.
•
Never disassemble, repair or alter.
Doing so may cause a fi re, electrical shock, heat or a short.
•
Do not install the Washlet on moving vehicles such as RV's or boats.
Doing so could cause a fi re, electric shock, a short or malfunction.
•
The toilet seat, lid, main unit or other part might come loose and fall apart, resulting in injury.
•
Do not use the Washlet if a malfunction occurs.
[USA]
In the following cases, unplug the plug out from the outlet and close the water supply valve.
[Asia, Oceania]
In the following cases, switch the breaker on the distribution board to OFF and close the water
supply valve.
Possible malfunctions:
Water is leaking from a pipe or the main unit
−
The product is cracked or broken.
−
The product makes a strange noise or emits a strange odor.
−
The product emits smoke.
−
The product is abnormally hot.
−
The toilet seat cushion is out of place.
−
Continued use after malfunction could cause a fi re, electrical shock, heat, short, injury or water
•
damage.
4 5
Introduction
Safety Precautions
WARNING
Only use tap water or potable well water (underground water). Do not use
seawater.
Doing so may cause irritation to the skin and malfunction.
•
Do not touch the power plug during thunderstorms.
Doing so may cause electrical shock.
•
Do not allow the water supply hose to touch the power plug or outlet.
Doing so may cause condensation resulting in a fi re, electrical shock, heat or a short.
•
Do not do anything that could damage the power cord, power plug or toilet
seat cord.
Do not strike, yank, twist, excessively bend, damage, alter, or heat the electrical cords. Also, do
not place anything heavy, bind or pinch the electrical cords.
Using a damaged electrical cord may result in a fi re, electrical shock, heat or short.
•
Do not use a loose or faulty electrical outlet.
Doing so could cause a fi re or a short.
•
Do no use any outlet or wiring equipment beyond its specifi ed rating.
Plugging too many plugs into the same outlet, for example using outlet splitters, can cause fi re
•
due to heat.
Do not use any power supply other than the one specifi ed.
[USA]
AC 120 V, 60Hz
[Asia, Oceania]
AC 220 V, 50/60Hz
Doing so could cause a fi re or excessive heat.
•
Do not stick a fi nger or anything else into the warm air outlet.
Do not place anything on the warm air outlet or drape clothes over it.
Doing so could cause burns, electrical shock or malfunction.
•
Beware of low-grade burns
Improper use of heated toilet seats could cause a low-grade burn.
•
When sitting for a long time on the toilet seat, switch the toilet seat temperature adjustment to
"OFF".
When any of the following persons use a heated seat or warm air drying, someone should switch
the toilet seat temperature adjustment to "OFF" and switch the drying air temperature to "Low".
Young children, the aged and other users unable set the temperature appropriately themselves
−
The ill, physically disabled and others who do not have freedom of movement
−
Those using any medicines that cause drowsiness (sleeping medicine or cold medicine), those
−
who have been drinking heavily, anyone severely fatigued and anyone else liable to fall asleep
Always connect the Washlet to the cold water supply.
Connecting to hot water supply may result in burns and equipment damage.
•
Make sure that a properly grounded (3 prong) outlet has been installed.
Failure to install a grounded outlet could cause electrical shock in the event of a malfunction or
•
short circuit.
6 7
Introduction
Safety Precautions (Continued)
WARNING
Do not unplug by pulling the cord.
To unplug, hold the plug, not the cord.
Pulling on the cord may cause damage and result in fi re or heat.
•
This is an electrical product. Do not install it anywhere water is likely to
get on the product or anywhere with humidity high enough that water is
likely to form on the surface of this product. When using the product in a
bathroom, install a fan or ventilation port and ensure good air fl ow through
the bathroom.
Failure to do so could cause a fi re or electrical shock.
•
If the electric cord is damaged, avoid danger by having the manufacturer’s
repair department or equivalent specialist replace it.
Insert the power plug securely into the outlet.
Failure to do so could cause a fi re, heat or a short.
•
[USA]
Periodically remove dust and dirt from the electrical plug and make sure
it is securely plugged into the wall outlet.
Failure to do so could cause a fi re, heat or a short.
•
Pull the plug out from the outlet and wipe clean with a dry cloth.
Always unplug the plug from the outlet before cleaning or maintenance.
Failure to do so may cause electrical shock.
•
Except when using “Wand cleaning”
•
Always unplug the plug from the outlet before removing the main unit.
Failure to do so could cause a fi re or electrical shock.
•
[Asia, Oceania]
Check that the power plug is waterproofed with silicone rubber.
A power plug that is not water-proofed could cause a fi re and electrical shock.
•
* If the power plug is not water-proofed, ask the contractor who did the installation to water-
proof it.
Check that an appropriate ground is installed.
If the ground is not installed, if there is a breakdown or electrical current leak, the lack of a
•
ground could cause electrical shock.
For the ground, use copper wire with a ground resistance of 100 Ω max. and a diameter of
0.005 ft (1.6 mm) min.
* If there is no ground installed, ask the contractor who did the installation to install a ground.
Check that the outlet for electrical power is as follows.
Failure to do so could cause a fi re or electrical shock.
•
a. Protect the outlet circuits with a high-sensitivity quick leakage switch (with a rated current
sensitivity of 15mA or less) or an insulating transformer (1.5kVA min., 3kVA max.).
b. Install the outlet and plug positioned at least 2.62 ft (0.8 m) above the fl oor and as far as
possible from the bathtub.
* Check that the wiring in a. and b. above is complete. If the wiring has not been completed,
ask the contractor who did the installation to do it.
WARNING
[Asia, Oceania]
Always switch the breaker on the distribution board to OFF before
cleaning or maintenance.
Failure to do so may cause electrical shock.
•
Except when using “Wand cleaning”
•
Always switch the breaker on the distribution board to OFF before
removing the main unit.
Failure to do so could cause a fi re or electrical shock.
•
CAUTION
Keep cigarettes and other open fl ames away from this product.
Failure to do so could cause a fi re.
•
When cleaning or maintaining the plastic parts (main unit etc.) or the water
supply hose, use a kitchen cleaner diluted with water. Do not use any of the
following.
Toilet cleaner, household cleaner, benzene, paint thinner, powdered cleanser or nylon scrubbing
pads.
These items could damage or crack the plastic and cause injury or malfunction.
•
These items could damage the water supply hose and cause a water leak.
•
Do not apply strong force, mechanical shock, step on or stand on the toilet
seat, toilet lid or main unit. Also do not place any heavy object on the toilet
seat, toilet lid or main unit.
Doing so could cause cracking or cause the main unit to come loose and fall resulting in injury.
•
Doing so could damage the product and cause injury or water damage.
•
Do not lift up this product by the toilet seat or lid.
Do not raise the toilet seat or lid while objects are resting on top of the toilet.
Doing so could cause the main unit to come loose and fall resulting in injury.
•
Do not fold or crush the water supply hose.
Doing so could cause water leaks.
•
To prevent a sudden water leak, do not remove the water fi lter drain valve
when the water supply valve is open.
Doing so will cause water to spurt out.
•
Refer to Page 37 for instructions on cleaning the water fi lter drain valve.
Do not install the base plate, which is not attached, to the Washlet.
Doing so could cause a fi re or damage.
•
Do not use the product if the main unit is unstable.
Doing so could cause the main unit to come loose and fall resulting in injury.
•
6 7
Introduction
Safety Precautions (Continued)
WARNING
Do not unplug by pulling the cord.
To unplug, hold the plug, not the cord.
Pulling on the cord may cause damage and result in fi re or heat.
•
This is an electrical product. Do not install it anywhere water is likely to
get on the product or anywhere with humidity high enough that water is
likely to form on the surface of this product. When using the product in a
bathroom, install a fan or ventilation port and ensure good air fl ow through
the bathroom.
Failure to do so could cause a fi re or electrical shock.
•
If the electric cord is damaged, avoid danger by having the manufacturer’s
repair department or equivalent specialist replace it.
Insert the power plug securely into the outlet.
Failure to do so could cause a fi re, heat or a short.
•
[USA]
Periodically remove dust and dirt from the electrical plug and make sure
it is securely plugged into the wall outlet.
Failure to do so could cause a fi re, heat or a short.
•
Pull the plug out from the outlet and wipe clean with a dry cloth.
Always unplug the plug from the outlet before cleaning or maintenance.
Failure to do so may cause electrical shock.
•
Except when using “Wand cleaning”
•
Always unplug the plug from the outlet before removing the main unit.
Failure to do so could cause a fi re or electrical shock.
•
[Asia, Oceania]
Check that the power plug is waterproofed with silicone rubber.
A power plug that is not water-proofed could cause a fi re and electrical shock.
•
* If the power plug is not water-proofed, ask the contractor who did the installation to water-
proof it.
Check that an appropriate ground is installed.
If the ground is not installed, if there is a breakdown or electrical current leak, the lack of a
•
ground could cause electrical shock.
For the ground, use copper wire with a ground resistance of 100 Ω max. and a diameter of
0.005 ft (1.6 mm) min.
* If there is no ground installed, ask the contractor who did the installation to install a ground.
Check that the outlet for electrical power is as follows.
Failure to do so could cause a fi re or electrical shock.
•
a. Protect the outlet circuits with a high-sensitivity quick leakage switch (with a rated current
sensitivity of 15mA or less) or an insulating transformer (1.5kVA min., 3kVA max.).
b. Install the outlet and plug positioned at least 2.62 ft (0.8 m) above the fl oor and as far as
possible from the bathtub.
* Check that the wiring in a. and b. above is complete. If the wiring has not been completed,
ask the contractor who did the installation to do it.
WARNING
[Asia, Oceania]
Always switch the breaker on the distribution board to OFF before
cleaning or maintenance.
Failure to do so may cause electrical shock.
•
Except when using “Wand cleaning”
•
Always switch the breaker on the distribution board to OFF before
removing the main unit.
Failure to do so could cause a fi re or electrical shock.
•
CAUTION
Keep cigarettes and other open fl ames away from this product.
Failure to do so could cause a fi re.
•
When cleaning or maintaining the plastic parts (main unit etc.) or the water
supply hose, use a kitchen cleaner diluted with water. Do not use any of the
following.
Toilet cleaner, household cleaner, benzene, paint thinner, powdered cleanser or nylon scrubbing
pads.
These items could damage or crack the plastic and cause injury or malfunction.
•
These items could damage the water supply hose and cause a water leak.
•
Do not apply strong force, mechanical shock, step on or stand on the toilet
seat, toilet lid or main unit. Also do not place any heavy object on the toilet
seat, toilet lid or main unit.
Doing so could cause cracking or cause the main unit to come loose and fall resulting in injury.
•
Doing so could damage the product and cause injury or water damage.
•
Do not lift up this product by the toilet seat or lid.
Do not raise the toilet seat or lid while objects are resting on top of the toilet.
Doing so could cause the main unit to come loose and fall resulting in injury.
•
Do not fold or crush the water supply hose.
Doing so could cause water leaks.
•
To prevent a sudden water leak, do not remove the water fi lter drain valve
when the water supply valve is open.
Doing so will cause water to spurt out.
•
Refer to Page 37 for instructions on cleaning the water fi lter drain valve.
Do not install the base plate, which is not attached, to the Washlet.
Doing so could cause a fi re or damage.
•
Do not use the product if the main unit is unstable.
Doing so could cause the main unit to come loose and fall resulting in injury.
•
8 9
Introduction
Safety Precautions (Continued)
CAUTION
If a water leak should occur, always close the water supply valve.
Preventing damage to pipes and hoses due to freezing
Frozen water pipes could cause the main unit and the pipes to break, resulting in a water leak.
•
Regulate the room temperature to prevent the pipes and hoses from freezing during cold months.
[USA]
When not using the Washlet over an extended period of time, drain the water
out of the Washlet and the water supply hose, and pull the electrical plug
from the outlet.
When using the product again, allow the product to refi ll with water fi rst.
Otherwise, the water in the tank might become contaminated and cause skin infl ammation or
•
other problems.
Leaving the power ON might cause a fi re or heat.
•
[Asia, Oceania]
When not using the Washlet over an extended period of time, drain the water
out of the Washlet and the water supply hose, and switch the breaker on the
distribution board to OFF.
When using the product again, allow the product to refi ll with water fi rst.
Otherwise, the water in the tank might become contaminated and cause skin infl ammation or
•
other problems.
Leaving the power ON might cause a fi re or heat.
•
When installing the water fi lter drain valve, make sure that it is securely
tightened in its proper position.
Failure to securely tighten it might cause water leaks.
•
Push the main unit securely on to the base plate.
After pushing the main unit until a click sound is heard, pull it slightly toward you to make sure that
the product does not detach.
Failure to do so could cause the main unit to come loose and fall resulting in injury.
•
DANGER To reduce the risk of electrocution:
1. Do not use while bathing.
2. Do not place or store the product where it can fall or be pulled into a tub or sink.
3. Do not place in or drop into water or other liquid.
4. Do not reach for the product when it has fallen into water. Unplug immediately.
DANGER
To reduce the risk of burns, electrocution, Þ re or injury to persons:
1. Close supervision is necessary when this product is used by, on, or near children or
invalids.
2. Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
3. Never operate this product if it has a damaged cord or plug, is not working properly,
has been dropped or damaged, or has been dropped in water. Return the product to
a service center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never block the air openings on the product or place it on a soft surface, such as a
bed or couch, where the air openings may be blocked. Keep the air openings free of
lint, hair, and other similar items.
6. Never use while sleepy or drowsy.
7. Never drop or insert any object into any opening or hose.
8. Do not use outdoors. Do not operate where aerosol (spray) products are being used
or where oxygen is being administered.
9. Connect this product to a properly grounded outlet only.
See "Grounding Instructions" in Page 10.
10. Tank should be fi lled with water only.
8 9
Introduction
Safety Precautions (Continued)
CAUTION
If a water leak should occur, always close the water supply valve.
Preventing damage to pipes and hoses due to freezing
Frozen water pipes could cause the main unit and the pipes to break, resulting in a water leak.
•
Regulate the room temperature to prevent the pipes and hoses from freezing during cold months.
[USA]
When not using the Washlet over an extended period of time, drain the water
out of the Washlet and the water supply hose, and pull the electrical plug
from the outlet.
When using the product again, allow the product to refi ll with water fi rst.
Otherwise, the water in the tank might become contaminated and cause skin infl ammation or
•
other problems.
Leaving the power ON might cause a fi re or heat.
•
[Asia, Oceania]
When not using the Washlet over an extended period of time, drain the water
out of the Washlet and the water supply hose, and switch the breaker on the
distribution board to OFF.
When using the product again, allow the product to refi ll with water fi rst.
Otherwise, the water in the tank might become contaminated and cause skin infl ammation or
•
other problems.
Leaving the power ON might cause a fi re or heat.
•
When installing the water fi lter drain valve, make sure that it is securely
tightened in its proper position.
Failure to securely tighten it might cause water leaks.
•
Push the main unit securely on to the base plate.
After pushing the main unit until a click sound is heard, pull it slightly toward you to make sure that
the product does not detach.
Failure to do so could cause the main unit to come loose and fall resulting in injury.
•
DANGER To reduce the risk of electrocution:
1. Do not use while bathing.
2. Do not place or store the product where it can fall or be pulled into a tub or sink.
3. Do not place in or drop into water or other liquid.
4. Do not reach for the product when it has fallen into water. Unplug immediately.
DANGER
To reduce the risk of burns, electrocution, Þ re or injury to persons:
1. Close supervision is necessary when this product is used by, on, or near children or
invalids.
2. Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
3. Never operate this product if it has a damaged cord or plug, is not working properly,
has been dropped or damaged, or has been dropped in water. Return the product to
a service center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never block the air openings on the product or place it on a soft surface, such as a
bed or couch, where the air openings may be blocked. Keep the air openings free of
lint, hair, and other similar items.
6. Never use while sleepy or drowsy.
7. Never drop or insert any object into any opening or hose.
8. Do not use outdoors. Do not operate where aerosol (spray) products are being used
or where oxygen is being administered.
9. Connect this product to a properly grounded outlet only.
See "Grounding Instructions" in Page 10.
10. Tank should be fi lled with water only.
10 11
Introduction
For prevention of malfunctions
■
Do not block the body sensor or the remote control
●
transmitter or receiver.
<About the Body Sensors>
Two types of body sensor are used.
Body sensor A detects changes in heat.
●
Detection may be diffi cult when the room
•
temperature exceeds 86 °F (30 °C), such as in the
summertime.
When sunlight is directly on the sensor area or a
•
heater is used in the bathroom, the sensor may
detect incorrectly due to the heat, resulting in the
automatic operation of functions such as auto lid
opening and closing.
When the bathroom door is open, the sensor may
•
detect people who pass to the front or side of the
toilet.
Body sensor B detects when someone stands in
●
front of the toilet bowl.
Body sensor B emits an infrared beam as shown
•
in the fi gure. When someone moves into the line of
this infrared beam, the sensor detects the person.
Detection by the sensor may be diffi cult when the
*
toilet is used by someone small, such as a child.
Body sensor A Body sensor B
S350e
S300e
TCF4732A
TCF4731A
<About the seat switch>
When you sit on the toilet seat, the seat switch
●
turns ON, enabling you to use various features.
(A click sound is heard when the seat switch is
ACTIVATED.)
Seat switch
(Built-in)
The toilet seat lowers.
Gap
Switch
ON
The seat switch will not turn on unless you sit on
●
the seat properly.
Note
When a child uses the Washlet, the seat
●
switch may not be ACTIVATED their light
body weight.
Since the toilet seat is designed to move up
●
and down, a clearance is provided between
the toilet seat cushion and the toilet bowl.
For prevention of damage
■
Wipe plastic areas such as the main unit and remote
●
control with a soft, wet cloth.
Do not lean against the toilet lid.
●
Problem Prevention
■
[USA]
Disconnect the power plug if there is a risk of lightning.
●
[Asia, Oceania]
Switch the breaker on the distribution board to OFF if
●
there is a risk of lightning.
A toilet seat cover or a toilet lid cover cannot be used.
●
(The body sensor or seat switch may not function properly.)
Cover
Do not urinate on the main unit, toilet seat or wand.
●
(Doing so may cause pink or brown stains or a malfunction.)
Do not apply strong forces to the control panel of the
●
remote control.
When using a toilet bowl cleaner to clean the toilet,
●
wash it off within 3 minutes and leave the toilet seat
and toilet lid open.
Wipe off any cleaner that remains on the toilet bowl.
•
(If vapor from a toilet bowl cleaner enters the main unit,
it may cause to a malfunction.)
Do not expose to direct sunlight.
●
(Doing so may cause temperature changes resulting in
changes in color, irregular heated seat temperature, a
remote control malfunction, or a Washlet malfunction.)
Use radios, etc. away from the Washlet.
●
(The Washlet could cause interference with the radio signal.)
If you use a booster seat for infants or a soft highchair,
●
remove it after use.
(Keeping it installed may prevent some of the functions
from being used.)
Do not apply force to the remote control.
●
(May cause malfunctions.)
To prevent the hanger from being dropped, set it in the
remote control hanger when you are not using it.
Be careful not to expose it to water.
About rear cleansing, soft rear cleansing, front
cleansing and wide front cleansing
These functions wash away waste and dirt from a
•
localized area of your body.
Do not cleanse too much or for too long.
•
Doing so may wash away normal bacteria,
•
upsetting the balance of bacteria inside your body.
People who are receiving medical treatment or
•
therapy in this localized area should consult their
doctor before use.
Operational Precautions
Grounding Instructions
This product should be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electrical current.
The plug must be plugged into an outlet that is properly installed and grounded.
DANGER - Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to
either fl at-head terminal.
Check with a qualifi ed electrician or serviceman if the grounding wire instructions are not
completely understood, or if in doubt as to whether the product is properly grounded.
This product is factory equipped with a specifi c electric cord and plug to permit connection to
a proper electric circuit. Make sure that the product is connected to an outlet having the same
confi guration as the plug.
No adapter should be used with this product. Do not modify the plug provided - if it will not fi t in
the outlet, have the proper outlet installed by a qualifi ed electrician.
If the product must be reconnected for use on a different type of electric circuit, the reconnection
should be made by qualifi ed service personnel.
If it is necessary to use an extension cord, use only a three wire extension cord that has a three
blade grounding plug, and a three-slot receptacle outlet that will accept the plug on the product.
Replace or repair a damaged cord.
Grounding pin
Save these instructions.
Safety Precautions (Continued)
10 11
Introduction
For prevention of malfunctions
■
Do not block the body sensor or the remote control
●
transmitter or receiver.
<About the Body Sensors>
Two types of body sensor are used.
Body sensor A detects changes in heat.
●
Detection may be diffi cult when the room
•
temperature exceeds 86 °F (30 °C), such as in the
summertime.
When sunlight is directly on the sensor area or a
•
heater is used in the bathroom, the sensor may
detect incorrectly due to the heat, resulting in the
automatic operation of functions such as auto lid
opening and closing.
When the bathroom door is open, the sensor may
•
detect people who pass to the front or side of the
toilet.
Body sensor B detects when someone stands in
●
front of the toilet bowl.
Body sensor B emits an infrared beam as shown
•
in the fi gure. When someone moves into the line of
this infrared beam, the sensor detects the person.
Detection by the sensor may be diffi cult when the
*
toilet is used by someone small, such as a child.
Body sensor A Body sensor B
S350e
S300e
TCF4732A
TCF4731A
<About the seat switch>
When you sit on the toilet seat, the seat switch
●
turns ON, enabling you to use various features.
(A click sound is heard when the seat switch is
ACTIVATED.)
Seat switch
(Built-in)
The toilet seat lowers.
Gap
Switch
ON
The seat switch will not turn on unless you sit on
●
the seat properly.
Note
When a child uses the Washlet, the seat
●
switch may not be ACTIVATED their light
body weight.
Since the toilet seat is designed to move up
●
and down, a clearance is provided between
the toilet seat cushion and the toilet bowl.
For prevention of damage
■
Wipe plastic areas such as the main unit and remote
●
control with a soft, wet cloth.
Do not lean against the toilet lid.
●
Problem Prevention
■
[USA]
Disconnect the power plug if there is a risk of lightning.
●
[Asia, Oceania]
Switch the breaker on the distribution board to OFF if
●
there is a risk of lightning.
A toilet seat cover or a toilet lid cover cannot be used.
●
(The body sensor or seat switch may not function properly.)
Cover
Do not urinate on the main unit, toilet seat or wand.
●
(Doing so may cause pink or brown stains or a malfunction.)
Do not apply strong forces to the control panel of the
●
remote control.
When using a toilet bowl cleaner to clean the toilet,
●
wash it off within 3 minutes and leave the toilet seat
and toilet lid open.
Wipe off any cleaner that remains on the toilet bowl.
•
(If vapor from a toilet bowl cleaner enters the main unit,
it may cause to a malfunction.)
Do not expose to direct sunlight.
●
(Doing so may cause temperature changes resulting in
changes in color, irregular heated seat temperature, a
remote control malfunction, or a Washlet malfunction.)
Use radios, etc. away from the Washlet.
●
(The Washlet could cause interference with the radio signal.)
If you use a booster seat for infants or a soft highchair,
●
remove it after use.
(Keeping it installed may prevent some of the functions
from being used.)
Do not apply force to the remote control.
●
(May cause malfunctions.)
To prevent the hanger from being dropped, set it in the
remote control hanger when you are not using it.
Be careful not to expose it to water.
About rear cleansing, soft rear cleansing, front
cleansing and wide front cleansing
These functions wash away waste and dirt from a
•
localized area of your body.
Do not cleanse too much or for too long.
•
Doing so may wash away normal bacteria,
•
upsetting the balance of bacteria inside your body.
People who are receiving medical treatment or
•
therapy in this localized area should consult their
doctor before use.
Operational Precautions
Grounding Instructions
This product should be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electrical current.
The plug must be plugged into an outlet that is properly installed and grounded.
DANGER - Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to
either fl at-head terminal.
Check with a qualifi ed electrician or serviceman if the grounding wire instructions are not
completely understood, or if in doubt as to whether the product is properly grounded.
This product is factory equipped with a specifi c electric cord and plug to permit connection to
a proper electric circuit. Make sure that the product is connected to an outlet having the same
confi guration as the plug.
No adapter should be used with this product. Do not modify the plug provided - if it will not fi t in
the outlet, have the proper outlet installed by a qualifi ed electrician.
If the product must be reconnected for use on a different type of electric circuit, the reconnection
should be made by qualifi ed service personnel.
If it is necessary to use an extension cord, use only a three wire extension cord that has a three
blade grounding plug, and a three-slot receptacle outlet that will accept the plug on the product.
Replace or repair a damaged cord.
Grounding pin
Save these instructions.
Safety Precautions (Continued)
Water drain lever
Seat switch (Built-in)
Toilet lid cushion
Toilet lid
Model name,
part no., etc.
Heated seat
Washlet control panel
* Use in situations such as when the remote control
batteries have discharged.
POWER ON/OFF button
FRONT ON/OFF button
Soft light
(S350e only)
This button cannot be used.
REAR ON/OFF button
Power plug
Power cord
Water supply hose
Main display
POWER LED
SEAT LED
CLEAN indicator
ENERGY SAVER LED
Warm air dryer door
Wand door
Wand
Water filter drain valve
Water filter
drain valve
Cover
Water supply valve
Toilet lid and toilet seat underside
Right side of main unit
Deodorizing filter
Removal button
Right rear of main unit
Remote control receiver
Body sensor B
(S350e only)
Toilet seat cushions
Deodorizer vent
Body sensor A
12 13
Introduction
Parts Names
S350e
S300e
Water drain lever
Seat switch (Built-in)
Toilet lid cushion
Toilet lid
Model name,
part no., etc.
Heated seat
Washlet control panel
* Use in situations such as when the remote control
batteries have discharged.
POWER ON/OFF button
FRONT ON/OFF button
Soft light
(S350e only)
This button cannot be used.
REAR ON/OFF button
Power plug
Power cord
Water supply hose
Main display
POWER LED
SEAT LED
CLEAN indicator
ENERGY SAVER LED
Warm air dryer door
Wand door
Wand
Water filter drain valve
Water filter
drain valve
Cover
Water supply valve
Toilet lid and toilet seat underside
Right side of main unit
Deodorizing filter
Removal button
Right rear of main unit
Remote control receiver
Body sensor B
(S350e only)
Toilet seat cushions
Deodorizer vent
Body sensor A
12 13
Introduction
Parts Names
S350e
S300e
Water drain lever
Seat switch (Built-in)
Toilet lid cushion
Toilet lid
Remote control receiver
Model name, part no., etc.
Heated seat
Washlet control panel
* Use in situations such as when the remote control
batteries have discharged.
POWER ON/OFF button
FRONT ON/OFF button
Soft light
This button cannot be used.
REAR ON/OFF button
Power plug
Power cord
Cover
Water supply hose
Water supply
valve
Main display
POWER LED
SEAT LED
CLEAN indicator
ENERGY SAVER LED
Warm air dryer door
Wand door
Wand
Water filter drain valve
Water filter
drain valve
Toilet lid and toilet seat underside
Right side of main unit
Deodorizing filter
Removal button
Right rear of main unit
Body sensor B
Toilet seat cushions
Deodorizer vent
Body sensor A
14 15
Introduction
Parts Names
TCF4732A
TCF4731A
Water drain lever
Seat switch (Built-in)
Toilet lid cushion
Toilet lid
Remote control receiver
Model name, part no., etc.
Heated seat
Washlet control panel
* Use in situations such as when the remote control
batteries have discharged.
POWER ON/OFF button
FRONT ON/OFF button
Soft light
This button cannot be used.
REAR ON/OFF button
Power plug
Power cord
Cover
Water supply hose
Water supply
valve
Main display
POWER LED
SEAT LED
CLEAN indicator
ENERGY SAVER LED
Warm air dryer door
Wand door
Wand
Water filter drain valve
Water filter
drain valve
Toilet lid and toilet seat underside
Right side of main unit
Deodorizing filter
Removal button
Right rear of main unit
Body sensor B
Toilet seat cushions
Deodorizer vent
Body sensor A
14 15
Introduction
Parts Names
TCF4732A
TCF4731A
1. Insert the battery.
1
Remove the remote control
from the hanger.
Hanger
2
Open the battery cover and
insert two AA batteries.
Battery cover
AA batteries x2
Close
Open
3
Mount the remote control in
the hanger.
About the batteries ■
Use dry cell, alkaline batteries. Follow the
●
instructions below to prevent the batteries from
rupturing or leaking fl uid.
When replacing the batteries, use new batteries of
•
the same brand.
If you will not be using the remote control for a long
•
time, remove the batteries.
Do not use rechargeable batteries.
•
When the remote control is locked to
prevent theft
1
Remove the screw from the
remote control Þ xture.
Phillips screwdriver
Screw
Hanger
Wall
Loosen
Remote control
(Side view)
2
Remove the remote control
from the hanger.
To return
●
Tighten the screw. (Overtightening may
•
cause damage to parts such as the hanger.)
2. Turn on the power.
1
[USA]
Insert the power plug.
The wand extends and then retracts.
•
[Asia, Oceania]
Switch the breaker on the
distribution board to ON.
The wand extends and then retracts.
•
2
Check that the POWER LED
on the main display is lit up.
If the LED is not lit up, pressing [POWER
•
ON/OFF] will light it up.
If the POWER lamp fl ickers, the main unit is
•
not installed properly. Mount the main unit
again. (Page 34)
3. Open the water supply valve.
1
Fully open the water supply
valve.
16 17
Introduction
Preparation
Using the Washlet for the First Time
1. Insert the battery.
1
Remove the remote control
from the hanger.
Hanger
2
Open the battery cover and
insert two AA batteries.
Battery cover
AA batteries x2
Close
Open
3
Mount the remote control in
the hanger.
About the batteries ■
Use dry cell, alkaline batteries. Follow the
●
instructions below to prevent the batteries from
rupturing or leaking fl uid.
When replacing the batteries, use new batteries of
•
the same brand.
If you will not be using the remote control for a long
•
time, remove the batteries.
Do not use rechargeable batteries.
•
When the remote control is locked to
prevent theft
1
Remove the screw from the
remote control Þ xture.
Phillips screwdriver
Screw
Hanger
Wall
Loosen
Remote control
(Side view)
2
Remove the remote control
from the hanger.
To return
●
Tighten the screw. (Overtightening may
•
cause damage to parts such as the hanger.)
2. Turn on the power.
1
[USA]
Insert the power plug.
The wand extends and then retracts.
•
[Asia, Oceania]
Switch the breaker on the
distribution board to ON.
The wand extends and then retracts.
•
2
Check that the POWER LED
on the main display is lit up.
If the LED is not lit up, pressing [POWER
•
ON/OFF] will light it up.
If the POWER lamp fl ickers, the main unit is
•
not installed properly. Mount the main unit
again. (Page 34)
3. Open the water supply valve.
1
Fully open the water supply
valve.
16 17
Introduction
Preparation
Using the Washlet for the First Time
Opening and closing
Stopping
Cleansing
Drying
[SEAT OPEN/CLOSE]
Opens and closes the toilet seat.
(S350e, TCF4732A, TCF4731A only)
[STOP]
Stops the operation.
[REAR]
Cleanses your rear.
* The mode changes between [SOFT REAR] (Flickering)
and [REAR] (Lit) each time the button is pressed.
[WIDE FRONT]
Serves as a bidet over a wider area.
*
The mode changes between [FRONT] (Flickering) and
[WIDE FRONT] (Lit) each time the button is pressed.
[SOFT REAR]
Cleanses your rear with mild water pres-
sure.
[DRYER]
Dries your front and/or rear.
[FRONT]
Serves as a bidet for women.
[PERSONAL SETTING LOCK 1/PERSONAL SETTING LOCK 2]
You can store your preferred wand position, water pressure and warm water temperature
settings.
● To store a setting
While cleansing is in progress, set your preferred wand position, water pressure and warm
water temperature, and then press and hold "
1 " or " 2 " for 2 seconds or longer.
● To use
After "
1 " or " 2 " is pressed, please push the button used for cleaning.
*The wand position and water pressure LED's will light up for about 10 seconds displaying the
programed personal settings. Then the water temperature display will also show the
programmed personal setting.
*
*
[OSCILLATING]
The wand moves back and forth to wash
your rear thoroughly. The setting changes
between "ON" and "OFF" each time the
button is pressed. You can use this function
whenever you feel like it.
[PULSATING]
Washes with the water pressure pulsating
between soft and strong. The setting
changes between "ON" and "OFF" each
time the button is pressed. You can use this
function whenever you feel like it.
[PRESSURE]
The water pressure strength can be
adjusted for cleansing functions such as
REAR.
("+": Stronger, "–": Softer)
[POSITION]
The wand position can be adjusted to the
front or rear.
"▲" Moves to the front, "▼" Moves to the
rear)
● Functions that operate when a button is pressed during "REAR", "SOFT REAR", "FRONT" or "WIDE
FRONT" cleansing.
18 19
Operation
Basic Operations
Opening and closing
Stopping
Cleansing
Drying
[SEAT OPEN/CLOSE]
Opens and closes the toilet seat.
(S350e, TCF4732A, TCF4731A only)
[STOP]
Stops the operation.
[REAR]
Cleanses your rear.
* The mode changes between [SOFT REAR] (Flickering)
and [REAR] (Lit) each time the button is pressed.
[WIDE FRONT]
Serves as a bidet over a wider area.
*
The mode changes between [FRONT] (Flickering) and
[WIDE FRONT] (Lit) each time the button is pressed.
[SOFT REAR]
Cleanses your rear with mild water pres-
sure.
[DRYER]
Dries your front and/or rear.
[FRONT]
Serves as a bidet for women.
[PERSONAL SETTING LOCK 1/PERSONAL SETTING LOCK 2]
You can store your preferred wand position, water pressure and warm water temperature
settings.
● To store a setting
While cleansing is in progress, set your preferred wand position, water pressure and warm
water temperature, and then press and hold "
1 " or " 2 " for 2 seconds or longer.
● To use
After "
1 " or " 2 " is pressed, please push the button used for cleaning.
*The wand position and water pressure LED's will light up for about 10 seconds displaying the
programed personal settings. Then the water temperature display will also show the
programmed personal setting.
*
*
[OSCILLATING]
The wand moves back and forth to wash
your rear thoroughly. The setting changes
between "ON" and "OFF" each time the
button is pressed. You can use this function
whenever you feel like it.
[PULSATING]
Washes with the water pressure pulsating
between soft and strong. The setting
changes between "ON" and "OFF" each
time the button is pressed. You can use this
function whenever you feel like it.
[PRESSURE]
The water pressure strength can be
adjusted for cleansing functions such as
REAR.
("+": Stronger, "–": Softer)
[POSITION]
The wand position can be adjusted to the
front or rear.
"▲" Moves to the front, "▼" Moves to the
rear)
● Functions that operate when a button is pressed during "REAR", "SOFT REAR", "FRONT" or "WIDE
FRONT" cleansing.
18 19
Operation
Basic Operations
1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTINGS
MENU 1/4
WAND
CLEANING
MODE ON/OFF
CLEANING
1/1
1. AUTO ENERGY
SAVER
2. TIMER SAVER
OFF
OFF
ENERGY
SAVER
1/2
2. CLEANING
3. LIGHT
AUTO
FUNCTIONS
1/3
1. AUTO
OPEN/CLOSE
2. AUTO CLOSE
WAITING TIME
AUTO
OPEN/CLOSE
1/4
90SEC
ON
4. SEAT/LID
3. AUTO OPEN
WAITING TIME
15SEC
LID
1. BEEP
2. SETTING
LOCK
OTHER
SETTINGS
1/3
OFF
ON
1. AUTO
OPEN/CLOSE
1. AUTO WAND
CLEANING
2. AUTO BOWL
CLEANING
CLEANING
1/3
ON
ON
3. DEODORIZER
ON
LIGHT 1/3
1. SOFT LIGHT
2. BOWL LIGHT
ON
ON
3. INDICATOR
ON
3. PERSONAL
SETTING
LOCK
ON
SETTING LOCK
PRESS ENTER
FOR 2 SEC
TO RESET
WATER
SEAT
DRYER
DIRECTIONAL
TEMPERATURE
SETTING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
[TEMP]
Remote control backside
Press [MENU] to display the menu
screen.
You can lock the settings so that
you do not mistakenly operate the
back buttons while using the
remote control.
Setting lock
Display screen during setting lock
How to set (Page 48)
20 21
Operation
Basic Operations
About the Menu Screen
This section is an overview of the settings that can be conÞ gured with the remote control.
See the corresponding pages for the detailed descriptions.
•
The setting features vary according to the model.
•
Level 1 Level 2 Level 3
Menu Screen
1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTINGS
MENU 1/4
WAND
CLEANING
MODE ON/OFF
CLEANING
1/1
1. AUTO ENERGY
SAVER
2. TIMER SAVER
OFF
OFF
ENERGY
SAVER
1/2
2. CLEANING
3. LIGHT
AUTO
FUNCTIONS
1/3
1. AUTO
OPEN/CLOSE
2. AUTO CLOSE
WAITING TIME
AUTO
OPEN/CLOSE
1/4
90SEC
ON
4. SEAT/LID
3. AUTO OPEN
WAITING TIME
15SEC
LID
1. BEEP
2. SETTING
LOCK
OTHER
SETTINGS
1/3
OFF
ON
1. AUTO
OPEN/CLOSE
1. AUTO WAND
CLEANING
2. AUTO BOWL
CLEANING
CLEANING
1/3
ON
ON
3. DEODORIZER
ON
LIGHT 1/3
1. SOFT LIGHT
2. BOWL LIGHT
ON
ON
3. INDICATOR
ON
3. PERSONAL
SETTING
LOCK
ON
SETTING LOCK
PRESS ENTER
FOR 2 SEC
TO RESET
WATER
SEAT
DRYER
DIRECTIONAL
TEMPERATURE
SETTING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
[TEMP]
Remote control backside
Press [MENU] to display the menu
screen.
You can lock the settings so that
you do not mistakenly operate the
back buttons while using the
remote control.
Setting lock
Display screen during setting lock
How to set (Page 48)
20 21
Operation
Basic Operations
About the Menu Screen
This section is an overview of the settings that can be conÞ gured with the remote control.
See the corresponding pages for the detailed descriptions.
•
The setting features vary according to the model.
•
Level 1 Level 2 Level 3
Menu Screen
22 23
Operation
Automatic Functions
Convenience Features
Various automatic
functions are available,
such as a toilet lid
that opens and closes
automatically.
Operation under the initial
•
settings is described below.
Approaching
Sitting
Standing up
Moving away
Note
Changing
settings
Opening the toilet lid
automatically
AUTO OPEN/
CLOSE
*
When using the toilet seat
When the room temperature
•
reaches about 86 °F (30 °C)
or higher, the sensor may not
detect properly. (Open and
close manually.)
When the toilet lid is closed with
•
the remote control or by hand,
it cannot open automatically for
about 15 seconds. (Open and
close manually.)
If you sit on the toilet seat or
•
standing in front of the toilet
bowl briefl y, it will take about 5
minutes to close automatically.
Auto setting ON/OFF
•
Time until closing
•
(¿ Page 40)
Time until opening
•
Automatically opening, both
•
the toilet seat and toilet lid
instead of just the lid.
(¿ Page 42)
Toilet lid opens Toilet lid closes
( About 90 seconds after
standing up from the toilet
seat.)
When standing up to urinate
Toilet lid opens
Open the toilet seat with
*
the remote control.
Toilet lid closes
( About 90 seconds after moving away by
about 0.98 ft (30 cm) or more.)
Lighting up the inside of
the bathroom with a soft
light
SOFT LIGHT
*
Middle mode lights up
High mode lights up Middle mode lights up
( About 90 seconds after
standing up.)
Low mode lights up
(Goes out after about 5 seconds.)
Soft light ON/OFF
•
(¿ Page 46)
Cannot be used for S300e.
*
22 23
Operation
Automatic Functions
Convenience Features
Various automatic
functions are available,
such as a toilet lid
that opens and closes
automatically.
Operation under the initial
•
settings is described below.
Approaching
Sitting
Standing up
Moving away
Note
Changing
settings
Opening the toilet lid
automatically
AUTO OPEN/
CLOSE
*
When using the toilet seat
When the room temperature
•
reaches about 86 °F (30 °C)
or higher, the sensor may not
detect properly. (Open and
close manually.)
When the toilet lid is closed with
•
the remote control or by hand,
it cannot open automatically for
about 15 seconds. (Open and
close manually.)
If you sit on the toilet seat or
•
standing in front of the toilet
bowl briefl y, it will take about 5
minutes to close automatically.
Auto setting ON/OFF
•
Time until closing
•
(¿ Page 40)
Time until opening
•
Automatically opening, both
•
the toilet seat and toilet lid
instead of just the lid.
(¿ Page 42)
Toilet lid opens Toilet lid closes
( About 90 seconds after
standing up from the toilet
seat.)
When standing up to urinate
Toilet lid opens
Open the toilet seat with
*
the remote control.
Toilet lid closes
( About 90 seconds after moving away by
about 0.98 ft (30 cm) or more.)
Lighting up the inside of
the bathroom with a soft
light
SOFT LIGHT
*
Middle mode lights up
High mode lights up Middle mode lights up
( About 90 seconds after
standing up.)
Low mode lights up
(Goes out after about 5 seconds.)
Soft light ON/OFF
•
(¿ Page 46)
Cannot be used for S300e.
*
24 25
Operation
Approaching
Sitting Standing up
Note
Changing
settings
DEODORIZER
•
ON/OFF
(¿ Page 44)
DEODORIZER
Deodorizer stops
(After about 2 minutes)
Starts the deodorizer
Cleans the wand
automatically
( After about 25 seconds,
the wand extends and
"ewater+"
*
comes out from the base
of the wand.)
( Only when the cleansing
functions are used.)
When the wand has not been cleaned
•
in 8 hours, the wand is cleaned
automatically.
(Water comes out near the wand cover.)
AUTO WAND
•
CLEANING
ON/OFF
(¿ Page 44)
Clean the wand
automatically with clean
and sterile water *
AUTO WAND
CLEANING
After-mist
( After the automatic
wand cleaning is
fi nished,
"ewater+"
*
mist
is sprayed inside the
toilet bowl.)
The pre-mist and after-mist are not
•
sprayed if the toilet seat is open.
The pre-mist is not sprayed for about 90
•
seconds after the after-mist has fi nished.
When the bowl has not been cleaned in
•
8 hours, the mist is sprayed inside the
toilet bowl automatically.
AUTO BOWL
•
CLEANING
ON/OFF
(¿ Page 44)
Sanitize the toilet bowl with
"ewater+" *
AUTO BOWL
CLEANING
Pre-mist
( A mist is sprayed
inside the toilet
bowl to make it
more diffi cult for
dirt to adhere.)
BOWL LIGHT
•
ON/OFF
(¿ Page 46)
BOWL LIGHT
LED inside the
toilet bowl lights
up during pre-
mist
LED inside the toilet bowl
lights up during the auto
wand cleaning and after-
mist
Lights up when "Auto wand cleansing",
•
"Auto bowl cleaning" or "Deordorizing" is
operating.
(Only when sitting on the toilet seat.)
INDICATOR
•
ON/OFF
(¿ Page 46)
INDICATOR
CLEAN indicator
lights up
CLEAN indicator lights
up cyclically
Automatic Functions
Cleansing Features
"ewater+"
*
is used automatically to clean the wand and
toilet bowl.
* What is meant by "ewater+" ?
This is a hypochlorous water that is
generated from chloride ions in tap
water via electrolysis (aka: electrolysed
water or EO). It is widely used for
cleaning and disinfecting items such as
food, utensils and baby bottles.
Well water may not deliver the required
•
effect. (Because the level of chloride ions
is low.)
Clean, sterile water helps to minimize
•
dirty surfaces, but does not make cleaning
unnecessary.
The effect and duration vary depending on
•
the usage environment and conditions.
If dirt adheres...
If dirt adheres to the wand
■
during use, you can extend the
wand to clean it.
Cleaning the wand (Page 36)
•
Supports cleaning.
INDICATOR
■
Lights to show that the "clean"
functions are operating.
BOWL LIGHT
■
Lights to show that auto bowl cleaning
and auto wand cleaning are operating.
24 25
Operation
Approaching
Sitting Standing up
Note
Changing
settings
DEODORIZER
•
ON/OFF
(¿ Page 44)
DEODORIZER
Deodorizer stops
(After about 2 minutes)
Starts the deodorizer
Cleans the wand
automatically
( After about 25 seconds,
the wand extends and
"ewater+"
*
comes out from the base
of the wand.)
( Only when the cleansing
functions are used.)
When the wand has not been cleaned
•
in 8 hours, the wand is cleaned
automatically.
(Water comes out near the wand cover.)
AUTO WAND
•
CLEANING
ON/OFF
(¿ Page 44)
Clean the wand
automatically with clean
and sterile water *
AUTO WAND
CLEANING
After-mist
( After the automatic
wand cleaning is
fi nished,
"ewater+"
*
mist
is sprayed inside the
toilet bowl.)
The pre-mist and after-mist are not
•
sprayed if the toilet seat is open.
The pre-mist is not sprayed for about 90
•
seconds after the after-mist has fi nished.
When the bowl has not been cleaned in
•
8 hours, the mist is sprayed inside the
toilet bowl automatically.
AUTO BOWL
•
CLEANING
ON/OFF
(¿ Page 44)
Sanitize the toilet bowl with
"ewater+" *
AUTO BOWL
CLEANING
Pre-mist
( A mist is sprayed
inside the toilet
bowl to make it
more diffi cult for
dirt to adhere.)
BOWL LIGHT
•
ON/OFF
(¿ Page 46)
BOWL LIGHT
LED inside the
toilet bowl lights
up during pre-
mist
LED inside the toilet bowl
lights up during the auto
wand cleaning and after-
mist
Lights up when "Auto wand cleansing",
•
"Auto bowl cleaning" or "Deordorizing" is
operating.
(Only when sitting on the toilet seat.)
INDICATOR
•
ON/OFF
(¿ Page 46)
INDICATOR
CLEAN indicator
lights up
CLEAN indicator lights
up cyclically
Automatic Functions
Cleansing Features
"ewater+"
*
is used automatically to clean the wand and
toilet bowl.
* What is meant by "ewater+" ?
This is a hypochlorous water that is
generated from chloride ions in tap
water via electrolysis (aka: electrolysed
water or EO). It is widely used for
cleaning and disinfecting items such as
food, utensils and baby bottles.
Well water may not deliver the required
•
effect. (Because the level of chloride ions
is low.)
Clean, sterile water helps to minimize
•
dirty surfaces, but does not make cleaning
unnecessary.
The effect and duration vary depending on
•
the usage environment and conditions.
If dirt adheres...
If dirt adheres to the wand
■
during use, you can extend the
wand to clean it.
Cleaning the wand (Page 36)
•
Supports cleaning.
INDICATOR
■
Lights to show that the "clean"
functions are operating.
BOWL LIGHT
■
Lights to show that auto bowl cleaning
and auto wand cleaning are operating.
26 27
Operation
Temperature Adjustment
Warm Water/Toilet Seat/Drying
Warm water
temperature
LowOFF
High
*
Toilet seat
temperature
LowOFF
High
Drying air
temperature
Low
High
To prevent condensation, the warm water temperature does not drop below 68 °F (20 °C) even when set to "OFF".
*
1
Press [TEMP].
WATER
TEMPERATURE
SETTING
SEAT
DRYER
2
Use to select the
temperature you
want to set.
WATER
SEAT
DRYER
TEMPERATURE
SETTING
WATER
SEAT
DRYER
TEMPERATURE
SETTING
WATER
SEAT
DRYER
TEMPERATURE
SETTING
3
Use to select the temperature
level.
WATER
SEAT
DRYER
TEMPERATURE
SETTING
To turn the temperature "OFF", press
•
until "OFF" is indicated.
To turn the temperature "OFF", press
•
until "OFF" is indicated.
When "OFF" is set, the SEAT LED will go off.
•
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[TEMP]
Select keys
: Select an item
: Select a setting
26 27
Operation
Temperature Adjustment
Warm Water/Toilet Seat/Drying
Warm water
temperature
LowOFF
High
*
Toilet seat
temperature
LowOFF
High
Drying air
temperature
Low
High
To prevent condensation, the warm water temperature does not drop below 68 °F (20 °C) even when set to "OFF".
*
1
Press [TEMP].
WATER
TEMPERATURE
SETTING
SEAT
DRYER
2
Use to select the
temperature you
want to set.
WATER
SEAT
DRYER
TEMPERATURE
SETTING
WATER
SEAT
DRYER
TEMPERATURE
SETTING
WATER
SEAT
DRYER
TEMPERATURE
SETTING
3
Use to select the temperature
level.
WATER
SEAT
DRYER
TEMPERATURE
SETTING
To turn the temperature "OFF", press
•
until "OFF" is indicated.
To turn the temperature "OFF", press
•
until "OFF" is indicated.
When "OFF" is set, the SEAT LED will go off.
•
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[TEMP]
Select keys
: Select an item
: Select a setting
28 29
Operation
Energy-Saver Features
Type
You can save energy by turning the toilet seat heater to a low temperature (or turning the
heater "OFF") during periods when the toilet will be used infrequently.
Note
Even if the toilet seat heater is set to "Low" or "OFF", the toilet seat is temporarily heated when you sit on it.
●
Auto energy-saver takes about 10 days to detect time periods in which the toilet seat is never or infrequently used.
●
Type Situation
Energy-Saver Status
0 6 8 5 9 0
Main Display Toilet seat heater
Auto
energy-
saver
You want to save
energy but dislike a
cold toilet seat
The Washlet detects time periods
with infrequent use and lowers
the toilet seat temperature
automatically.
When energy-saver
is set...
When the energy-saver
time arrives...
(Green) (Orange)
(Green)
Low
ation
Timer
energy-
saver
You want to save
energy only at the
specifi ed times
When the desired time for saving
energy is set, the heater is turned
off automatically every day at this
time.
When energy-saver
is set...
When the energy-saver
time arrives...
(Green)
(Green)
OFF
Auto
energy-
saver
Timer
energy-
saver
You want to save a lot
of energy with auto
energy-saver and timer
energy-saver
When both auto energy-saver and
timer energy-saver are set, auto
energy-saver operates when timer
energy-saver is not operating.
When energy-saver
is set...
When the energy-saver
time arrives...
(Green)
●During auto energy-saver:
Same LED indication as auto
energy-saving (see above)
●During timer energy-saver:
Same LED indication as
timer energy-saver (see
above)
Low
OFF
To set energy-saver
Page 30
Set temperature
*1
Low temperature
*2
Low temperature
*2
Set temperature
*1
Set temperature
*1
OFF
*3
Set temperature
*1
Set temperature
*1
Low temperature
*2
Low temperature
*2
OFF
*3
Example: Used infrequently from 9 pm to 6 am
Example: Set from 8 am to 5 pm
Example: When auto energy-saver and timer energy-saver are used together
AM PM
1 The toilet seat temperature set on page 26.
*
2 The time period when the toilet seat heater is set to a low temperature by auto energy-saver.
*
3 The time period when the toilet seat heater is "OFF".
*
28 29
Operation
Energy-Saver Features
Type
You can save energy by turning the toilet seat heater to a low temperature (or turning the
heater "OFF") during periods when the toilet will be used infrequently.
Note
Even if the toilet seat heater is set to "Low" or "OFF", the toilet seat is temporarily heated when you sit on it.
●
Auto energy-saver takes about 10 days to detect time periods in which the toilet seat is never or infrequently used.
●
Type Situation
Energy-Saver Status
0 6 8 5 9 0
Main Display Toilet seat heater
Auto
energy-
saver
You want to save
energy but dislike a
cold toilet seat
The Washlet detects time periods
with infrequent use and lowers
the toilet seat temperature
automatically.
When energy-saver
is set...
When the energy-saver
time arrives...
(Green) (Orange)
(Green)
Low
ation
Timer
energy-
saver
You want to save
energy only at the
specifi ed times
When the desired time for saving
energy is set, the heater is turned
off automatically every day at this
time.
When energy-saver
is set...
When the energy-saver
time arrives...
(Green)
(Green)
OFF
Auto
energy-
saver
Timer
energy-
saver
You want to save a lot
of energy with auto
energy-saver and timer
energy-saver
When both auto energy-saver and
timer energy-saver are set, auto
energy-saver operates when timer
energy-saver is not operating.
When energy-saver
is set...
When the energy-saver
time arrives...
(Green)
●During auto energy-saver:
Same LED indication as auto
energy-saving (see above)
●During timer energy-saver:
Same LED indication as
timer energy-saver (see
above)
Low
OFF
To set energy-saver
Page 30
Set temperature
*1
Low temperature
*2
Low temperature
*2
Set temperature
*1
Set temperature
*1
OFF
*3
Set temperature
*1
Set temperature
*1
Low temperature
*2
Low temperature
*2
OFF
*3
Example: Used infrequently from 9 pm to 6 am
Example: Set from 8 am to 5 pm
Example: When auto energy-saver and timer energy-saver are used together
AM PM
1 The toilet seat temperature set on page 26.
*
2 The time period when the toilet seat heater is set to a low temperature by auto energy-saver.
*
3 The time period when the toilet seat heater is "OFF".
*
30 31
Operation
1
Press [MENU].
2
Use to select "ENERGY
SAVER" and then press
[ENTER].
1. CLEANING
2. ENERGY
SAVER
MENU 2/4
Energy-Saver Features
How to Set
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
Auto energy-
saver
3
Use to select
"AUTO ENERGY
SAVER".
1. AUTO ENERGY
SAVER
OFF
ENERGY
SAVER
1/2
4
Use to select
"ON" and then
press [ENTER].
1. AUTO ENERGY
SAVER
ON
ENERGY
SAVER
1/2
Timer energy-
saver
Example: To save energy from 1 am to 7 am (for 6 hours)
Perform the operation at the start time for timer energy-saver (1 am).
3
Use to select
"TIMER SAVER".
1. AUTO ENERGY
SAVER
2. TIMER SAVER
ON
OFF
ENERGY
SAVER
2/2
4
Use to select
"3H", "6H", "9H"
or "OFF" and then
press [ENTER].
1. AUTO ENERGY
SAVER
2. TIMER SAVER
ON
6H
ENERGY
SAVER
2/2
To change the energy-saver time or start time Redo from step 3.
Turning off
energy-saver
Select "OFF" in step 4 above.
AUTO
ENERGY
SAVER
ON
(To return
¿
)
TIMER SAVER
ON
6H
(To return
¿
)
When energy-saver is set, the
ENERGY SAVER LED (green)
lights up.
30 31
Operation
1
Press [MENU].
2
Use to select "ENERGY
SAVER" and then press
[ENTER].
1. CLEANING
2. ENERGY
SAVER
MENU 2/4
Energy-Saver Features
How to Set
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
Auto energy-
saver
3
Use to select
"AUTO ENERGY
SAVER".
1. AUTO ENERGY
SAVER
OFF
ENERGY
SAVER
1/2
4
Use to select
"ON" and then
press [ENTER].
1. AUTO ENERGY
SAVER
ON
ENERGY
SAVER
1/2
Timer energy-
saver
Example: To save energy from 1 am to 7 am (for 6 hours)
Perform the operation at the start time for timer energy-saver (1 am).
3
Use to select
"TIMER SAVER".
1. AUTO ENERGY
SAVER
2. TIMER SAVER
ON
OFF
ENERGY
SAVER
2/2
4
Use to select
"3H", "6H", "9H"
or "OFF" and then
press [ENTER].
1. AUTO ENERGY
SAVER
2. TIMER SAVER
ON
6H
ENERGY
SAVER
2/2
To change the energy-saver time or start time Redo from step 3.
Turning off
energy-saver
Select "OFF" in step 4 above.
AUTO
ENERGY
SAVER
ON
(To return
¿
)
TIMER SAVER
ON
6H
(To return
¿
)
When energy-saver is set, the
ENERGY SAVER LED (green)
lights up.
32 33
Maintenance
Do not use a dry cloth
or toilet paper on plastic
parts.
(May cause damage.)
Power Plug (Perform monthly)
<USA>
Dry cloth Wet cloth
1
Disconnect the power plug
and wipe it with a dry cloth.
2
Insert the power plug.
WARNING
Periodically remove dust from
●
the blades and other parts of the
power plug.
Disconnect the plug and wipe it
•
with a dry cloth.
Fully insert the power plug.
●
When disconnecting, hold the
●
main body of the power plug.
Pulling by the cord may damage
•
the plug or cord.
Except when using “Wand cleaning”
*
After the power plug is inserted, the toilet lid does not open
*
automatically for about 10 to 60 seconds. (Because it is
preparing for operation. S350e, TCF4732A, TCF4731A
only.)
Open and close by hand.
Main Unit (Perform monthly)
Wet cloth Toilet paper, etc.
(May cause damage.)
1
[USA]
Unplug the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to OFF.
2
Wipe with a soft cloth that
has been soaked in water
and wrung out thoroughly.
For heavy dirt
■
Wipe with a soft cloth soaked in diluted,
•
neutral kitchen detergent, and then wipe
with a soft cloth soaked in water.
3
[USA]
Insert the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to ON.
Attention!
The Washlet is an electric appliance. Be
●
careful not to allow water to get inside, and
not to leave detergent in the gap between the
main unit and the toilet bowl.
Do not push or pull the wand door or the
●
warm air dryer door with undue force.
(May cause damage or malfunctions.)
Maintenance
Power plug
Power plug
Main unit
Deodorizing Filter
Toilet Lid
33
Maintenance
Deodorizing Filter (Perform monthly)
<If you notice odors>
1
[USA]
Unplug the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to OFF.
2
Remove the deodorizing
Þ lter.
Hold the knob and pull outward.
•
Do not pull with undue force. (May
•
cause damage or malfunctions.)
3
Clean with a tool such as a
toothbrush.
When washing with water, dry off all
•
water before mounting.
Toothbrush
4
Mount the deodorizing Þ lter.
Push fi rmly until a click sound is
•
heard.
5
[USA]
Insert the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to ON.
Main Unit/Deodorizing Filter
*
[USA]
For safety, disconnect the power
plug before cleaning.
[Asia, Oceania]
Switch OFF the breaker in
the distribution board before
cleaning or maintenance.
32 33
Maintenance
Do not use a dry cloth
or toilet paper on plastic
parts.
(May cause damage.)
Power Plug (Perform monthly)
<USA>
Dry cloth Wet cloth
1
Disconnect the power plug
and wipe it with a dry cloth.
2
Insert the power plug.
WARNING
Periodically remove dust from
●
the blades and other parts of the
power plug.
Disconnect the plug and wipe it
•
with a dry cloth.
Fully insert the power plug.
●
When disconnecting, hold the
●
main body of the power plug.
Pulling by the cord may damage
•
the plug or cord.
Except when using “Wand cleaning”
*
After the power plug is inserted, the toilet lid does not open
*
automatically for about 10 to 60 seconds. (Because it is
preparing for operation. S350e, TCF4732A, TCF4731A
only.)
Open and close by hand.
Main Unit (Perform monthly)
Wet cloth Toilet paper, etc.
(May cause damage.)
1
[USA]
Unplug the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to OFF.
2
Wipe with a soft cloth that
has been soaked in water
and wrung out thoroughly.
For heavy dirt
■
Wipe with a soft cloth soaked in diluted,
•
neutral kitchen detergent, and then wipe
with a soft cloth soaked in water.
3
[USA]
Insert the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to ON.
Attention!
The Washlet is an electric appliance. Be
●
careful not to allow water to get inside, and
not to leave detergent in the gap between the
main unit and the toilet bowl.
Do not push or pull the wand door or the
●
warm air dryer door with undue force.
(May cause damage or malfunctions.)
Maintenance
Power plug
Power plug
Main unit
Deodorizing Filter
Toilet Lid
33
Maintenance
Deodorizing Filter (Perform monthly)
<If you notice odors>
1
[USA]
Unplug the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to OFF.
2
Remove the deodorizing
Þ lter.
Hold the knob and pull outward.
•
Do not pull with undue force. (May
•
cause damage or malfunctions.)
3
Clean with a tool such as a
toothbrush.
When washing with water, dry off all
•
water before mounting.
Toothbrush
4
Mount the deodorizing Þ lter.
Push fi rmly until a click sound is
•
heard.
5
[USA]
Insert the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to ON.
Main Unit/Deodorizing Filter
*
[USA]
For safety, disconnect the power
plug before cleaning.
[Asia, Oceania]
Switch OFF the breaker in
the distribution board before
cleaning or maintenance.
34 35
Maintenance
Maintenance
Gap between the Main Unit and the Toilet Bowl
Gap between the Main Unit and the Toilet Lid
Gap between the Main Unit and the Toilet Bowl (Perform monthly)
You can remove the main unit to clean the top of
the toilet bowl and the bottom of the main unit.
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
1
[USA]
Unplug the power plug.
[Asia, Oceania]
Switch the breaker on the distribution board to OFF.
2
Remove the main unit.
Do not pull the unit with undue force (because the water supply hose and power cord are attached).
•
Base plate
Bolt
Main unit removal button
Pull the main unit toward you
while pressing the button.
3
Clean the gap.
Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent, and then wipe with a
•
soft cloth soaked in water so that no detergent remains.
4
Mount the main unit.
Base plate
Click
Align the center.
Push the main unit until
a click sound is heard.
After mounting, check that the main
unit does not detach even when pulled.
CAUTION
Push the main unit fi rmly onto
the base plate until a click
sound is heard.
5
[USA]
Insert the power plug.
[Asia, Oceania]
Switch the breaker on the distribution board to ON.
6
Check the POWER LED on the Washlet control panel.
POWER LED
Status
Lit Mounting is OK
Off
Press "Power ON/OFF" and check
that it lights up
Flickering
Not mounted properly
¿
Mount
again
35
Maintenance
Between the main unit and the toilet lid (Perform monthly)
The toilet lid can be removed for thorough
cleaning.
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
1
[USA]
Unplug the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to OFF.
Removing and Reinstalling
A
B
C
D
E
Hinge
Hinge
Tab
Pin
Hold with
both hands
2
Remove the toilet lid, and
then remove the main unit.
(Page 34)
: Pull the left side outward.
: Disconnect the hinge from the tab and
pull up.
: Disconnect the right side.
3
Wipe with a soft cloth that has
been soaked in water and
wrung out thoroughly.
4
Reinstall the toilet lid.
: Join the pin and the hinge on the right
side.
Slightly tilt the toilet lid to the front.
: While pulling out the left side,
: Mount by joining the hinge with the
tab.
* Be careful not to pinch your fi ngers.
5
[USA]
Insert the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to ON.
6
Open and close the toilet lid
to check the mounting, and
then mount the main unit.
(Page 34)
34 35
Maintenance
Maintenance
Gap between the Main Unit and the Toilet Bowl
Gap between the Main Unit and the Toilet Lid
Gap between the Main Unit and the Toilet Bowl (Perform monthly)
You can remove the main unit to clean the top of
the toilet bowl and the bottom of the main unit.
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
1
[USA]
Unplug the power plug.
[Asia, Oceania]
Switch the breaker on the distribution board to OFF.
2
Remove the main unit.
Do not pull the unit with undue force (because the water supply hose and power cord are attached).
•
Base plate
Bolt
Main unit removal button
Pull the main unit toward you
while pressing the button.
3
Clean the gap.
Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent, and then wipe with a
•
soft cloth soaked in water so that no detergent remains.
4
Mount the main unit.
Base plate
Click
Align the center.
Push the main unit until
a click sound is heard.
After mounting, check that the main
unit does not detach even when pulled.
CAUTION
Push the main unit fi rmly onto
the base plate until a click
sound is heard.
5
[USA]
Insert the power plug.
[Asia, Oceania]
Switch the breaker on the distribution board to ON.
6
Check the POWER LED on the Washlet control panel.
POWER LED
Status
Lit Mounting is OK
Off
Press "Power ON/OFF" and check
that it lights up
Flickering
Not mounted properly
¿
Mount
again
35
Maintenance
Between the main unit and the toilet lid (Perform monthly)
The toilet lid can be removed for thorough
cleaning.
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
1
[USA]
Unplug the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to OFF.
Removing and Reinstalling
A
B
C
D
E
Hinge
Hinge
Tab
Pin
Hold with
both hands
2
Remove the toilet lid, and
then remove the main unit.
(Page 34)
: Pull the left side outward.
: Disconnect the hinge from the tab and
pull up.
: Disconnect the right side.
3
Wipe with a soft cloth that has
been soaked in water and
wrung out thoroughly.
4
Reinstall the toilet lid.
: Join the pin and the hinge on the right
side.
Slightly tilt the toilet lid to the front.
: While pulling out the left side,
: Mount by joining the hinge with the
tab.
* Be careful not to pinch your fi ngers.
5
[USA]
Insert the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to ON.
6
Open and close the toilet lid
to check the mounting, and
then mount the main unit.
(Page 34)
36 37
Maintenance
Maintenance
Wand
Wand (Perform monthly)
<If you notice dirt>
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
1
Extend the wand.
Remove the remote control from the hanger, and
1.
press [MENU] on the backside.
(Page 16)
Use
2.
to select "CLEANING" and then press
[ENTER].
Use
3.
to select "WAND CLEANING MODE ON/
OFF" and then press [ENTER].
The wand extends and water sprays out for
•
cleaning.
The wand automatically retracts after about
•
5 minutes.
2
Wipe with a soft, wet cloth.
Do not pull, push or press the wand with
•
excessive force.
(May cause damage or malfunctions.)
3
Return the wand.
In the [WAND CLEANING MODE ON/OFF]
1.
screen, press [ENTER] again.
The wand retracts.
•
Wand
Water filter drain valve
37
Maintenance
Water Filter Drain Valve (Perform once every 6 months)
<If you think the water pressure has weakened>
CAUTION
Do not remove the water fi lter
drain valve while the water
supply valve is open.
(Otherwise, water may leak out.)
1
Close the water supply valve.
(Page 53)
The water supply stops.
•
2
Release the pressure from
the water supply pipe.
Remove the remote control from the
1.
hanger, and press [MENU] on the back
side.
(Page 16)
Use
2.
to select "CLEANING" and
then press [ENTER].
Use
3.
to select "WAND CLEANING
MODE ON/OFF" and then press
[ENTER].
The wand extends and water
•
comes out.
In the [WAND CLEANING MODE ON/
4.
OFF] screen, press [ENTER] again.
The wand retracts.
•
3
Remove the cover.
Cover
4
[USA]
Unplug the power plug.
[Asia, Oceania]
Switch OFF the breaker on
the distribution board.
5
Remove the water Þ lter drain
valve.
Loosen the water fi lter drain valve with
•
a fl at-head screwdriver, and then pull
on it.
Water filter drain valve
Water collector
6
Clean with a tool such as a
toothbrush.
Also, remove any dust from inside the
hole of the drain valve.
7
Mount the water Þ lter drain
valve.
Insert the drain valve and use a fl at-
•
head screwdriver to tighten it securely.
8
Mount the cover.
Cover
9
[USA]
Insert the power plug.
[Asia, Oceania]
Switch ON the breaker on the
distribution board.
10
Open the water supply valve.
(Page 17)
Water Filter Drain Valve
36 37
Maintenance
Maintenance
Wand
Wand (Perform monthly)
<If you notice dirt>
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
1
Extend the wand.
Remove the remote control from the hanger, and
1.
press [MENU] on the backside.
(Page 16)
Use
2.
to select "CLEANING" and then press
[ENTER].
Use
3.
to select "WAND CLEANING MODE ON/
OFF" and then press [ENTER].
The wand extends and water sprays out for
•
cleaning.
The wand automatically retracts after about
•
5 minutes.
2
Wipe with a soft, wet cloth.
Do not pull, push or press the wand with
•
excessive force.
(May cause damage or malfunctions.)
3
Return the wand.
In the [WAND CLEANING MODE ON/OFF]
1.
screen, press [ENTER] again.
The wand retracts.
•
Wand
Water filter drain valve
37
Maintenance
Water Filter Drain Valve (Perform once every 6 months)
<If you think the water pressure has weakened>
CAUTION
Do not remove the water fi lter
drain valve while the water
supply valve is open.
(Otherwise, water may leak out.)
1
Close the water supply valve.
(Page 53)
The water supply stops.
•
2
Release the pressure from
the water supply pipe.
Remove the remote control from the
1.
hanger, and press [MENU] on the back
side.
(Page 16)
Use
2.
to select "CLEANING" and
then press [ENTER].
Use
3.
to select "WAND CLEANING
MODE ON/OFF" and then press
[ENTER].
The wand extends and water
•
comes out.
In the [WAND CLEANING MODE ON/
4.
OFF] screen, press [ENTER] again.
The wand retracts.
•
3
Remove the cover.
Cover
4
[USA]
Unplug the power plug.
[Asia, Oceania]
Switch OFF the breaker on
the distribution board.
5
Remove the water Þ lter drain
valve.
Loosen the water fi lter drain valve with
•
a fl at-head screwdriver, and then pull
on it.
Water filter drain valve
Water collector
6
Clean with a tool such as a
toothbrush.
Also, remove any dust from inside the
hole of the drain valve.
7
Mount the water Þ lter drain
valve.
Insert the drain valve and use a fl at-
•
head screwdriver to tighten it securely.
8
Mount the cover.
Cover
9
[USA]
Insert the power plug.
[Asia, Oceania]
Switch ON the breaker on the
distribution board.
10
Open the water supply valve.
(Page 17)
Water Filter Drain Valve
38 39
Reference
Changing Settings
Setting List
Various settings can be conÞ gured to make the Washlet more
convenient and user-friendly for you and your family.
Setting Types Available Settings
*
Applicable
Models
Setting Ref.
Page
AUTO
FUNCTIONS
AUTO
OPEN/CLOSE
AUTO OPEN/CLOSE
Set whether or not to open the toilet lid
•
automatically
ON
/OFF
S350e
TCF4732A
TCF4731A
Page 40
AUTO CLOSE WAITING
TIME
Change the amount of time before the
•
lid/seat closes automatically.
90SEC
/25SEC
AUTO OPEN WAITING
TIME
Change the amount of time before the
•
lid/seat opens automatically after it has
been closed manually with the remote
control.
15SEC/30SEC/90SEC
Page 42
SEAT/LID
Automatically open and close the toilet
•
lid only/Automatically open and close
the toilet seat and toilet lid.
LID
/SEAT LID
CLEANING
AUTO WAND CLEANING
Set whether or not to clean the wand
•
automatically
ON
/OFF
All models Page 44
AUTO BOWL CLEANING
Set whether or not to spray mist in the
•
toilet bowl automatically
ON
/OFF
DEODORIZER
Set whether or not to deodorize
•
automatically after sitting on the toilet
seat
ON
/OFF
LIGHT
SOFT LIGHT
Set whether or not to use the soft light
•
ON
/OFF
S350e
TCF4732A
TCF4731A
Page 46
BOWL LIGHT
Set whether or not to use the light
•
inside the toilet bowl
ON
/OFF
All models
INDICATOR
Set whether or not to light up the
•
CLEAN indicator
ON
/OFF
OTHER
SETTINGS
BEEP
Set whether or not to make a beep
•
sound
ON
/OFF
All models Page 48
SETTING LOCK
Set whether or not to use the setting
•
lock
ON/OFF
PERSONAL SETTING LOCK
Set whether or not to use the personal
•
setting lock
ON
/OFF
* The black text is the initial setting.
WATER
SEAT
DRYER
DIRECTIONAL
TEMPERATURE
SETTING
38 39
Reference
Changing Settings
Setting List
Various settings can be conÞ gured to make the Washlet more
convenient and user-friendly for you and your family.
Setting Types Available Settings
*
Applicable
Models
Setting Ref.
Page
AUTO
FUNCTIONS
AUTO
OPEN/CLOSE
AUTO OPEN/CLOSE
Set whether or not to open the toilet lid
•
automatically
ON
/OFF
S350e
TCF4732A
TCF4731A
Page 40
AUTO CLOSE WAITING
TIME
Change the amount of time before the
•
lid/seat closes automatically.
90SEC
/25SEC
AUTO OPEN WAITING
TIME
Change the amount of time before the
•
lid/seat opens automatically after it has
been closed manually with the remote
control.
15SEC/30SEC/90SEC
Page 42
SEAT/LID
Automatically open and close the toilet
•
lid only/Automatically open and close
the toilet seat and toilet lid.
LID
/SEAT LID
CLEANING
AUTO WAND CLEANING
Set whether or not to clean the wand
•
automatically
ON
/OFF
All models Page 44
AUTO BOWL CLEANING
Set whether or not to spray mist in the
•
toilet bowl automatically
ON
/OFF
DEODORIZER
Set whether or not to deodorize
•
automatically after sitting on the toilet
seat
ON
/OFF
LIGHT
SOFT LIGHT
Set whether or not to use the soft light
•
ON
/OFF
S350e
TCF4732A
TCF4731A
Page 46
BOWL LIGHT
Set whether or not to use the light
•
inside the toilet bowl
ON
/OFF
All models
INDICATOR
Set whether or not to light up the
•
CLEAN indicator
ON
/OFF
OTHER
SETTINGS
BEEP
Set whether or not to make a beep
•
sound
ON
/OFF
All models Page 48
SETTING LOCK
Set whether or not to use the setting
•
lock
ON/OFF
PERSONAL SETTING LOCK
Set whether or not to use the personal
•
setting lock
ON
/OFF
* The black text is the initial setting.
WATER
SEAT
DRYER
DIRECTIONAL
TEMPERATURE
SETTING
40 41
Reference
1
Press [MENU].
2
Use to
select "AUTO
FUNCTIONS"
and then press
[ENTER].
1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTING
MENU 3/4
3
Use to
select "AUTO
OPEN/
CLOSE" and
then press
[ENTER].
AUTO
FUNCTIONS
1/3
1. AUTO
OPEN/CLOSE
Changing Settings
AUTO OPEN/CLOSE
Set whether or not
to open the toilet lid
automatically
AUTO
OPEN/
CLOSE
4
Use to select
"AUTO OPEN/
CLOSE".
1. AUTO
OPEN/CLOSE
AUTO
OPEN/CLOSE
1/4
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
1. AUTO
OPEN/CLOSE
AUTO
OPEN/CLOSE
1/4
OFF
AUTO
OPEN/CLOSE
OFF
(To return
¿
)
Change the time period
till automatic closing
AUTO
CLOSE
WAITING
TIME
4
Use to select
"AUTO CLOSE
WAITING TIME".
1. AUTO
OPEN/CLOSE
2. AUTO CLOSE
WAITING TIME
AUTO
OPEN/CLOSE
2/4
90 SEC
ON
5
Use to select
"90SEC" or
"25SEC" and then
press [ENTER].
1. AUTO
OPEN/CLOSE
2. AUTO CLOSE
WAITING TIME
AUTO
OPEN/CLOSE
2/4
25 SEC
ON
AUTO CLOSE
WAITING TIME
25 SEC
(To return
¿
)
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
CAUTION
The setting items and numbers vary according to the model.
●
40 41
Reference
1
Press [MENU].
2
Use to
select "AUTO
FUNCTIONS"
and then press
[ENTER].
1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTING
MENU 3/4
3
Use to
select "AUTO
OPEN/
CLOSE" and
then press
[ENTER].
AUTO
FUNCTIONS
1/3
1. AUTO
OPEN/CLOSE
Changing Settings
AUTO OPEN/CLOSE
Set whether or not
to open the toilet lid
automatically
AUTO
OPEN/
CLOSE
4
Use to select
"AUTO OPEN/
CLOSE".
1. AUTO
OPEN/CLOSE
AUTO
OPEN/CLOSE
1/4
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
1. AUTO
OPEN/CLOSE
AUTO
OPEN/CLOSE
1/4
OFF
AUTO
OPEN/CLOSE
OFF
(To return
¿
)
Change the time period
till automatic closing
AUTO
CLOSE
WAITING
TIME
4
Use to select
"AUTO CLOSE
WAITING TIME".
1. AUTO
OPEN/CLOSE
2. AUTO CLOSE
WAITING TIME
AUTO
OPEN/CLOSE
2/4
90 SEC
ON
5
Use to select
"90SEC" or
"25SEC" and then
press [ENTER].
1. AUTO
OPEN/CLOSE
2. AUTO CLOSE
WAITING TIME
AUTO
OPEN/CLOSE
2/4
25 SEC
ON
AUTO CLOSE
WAITING TIME
25 SEC
(To return
¿
)
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
CAUTION
The setting items and numbers vary according to the model.
●
42 43
Reference
Changing Settings
AUTO OPEN/CLOSE
Change the time period
till automatic opening
(After closing manually.)
AUTO OPEN
WAITING
TIME
4
Use to select
"AUTO OPEN
WAITING TIME".
2. AUTO CLOSE
WAITING TIME
3. AUTO OPEN
WAITING TIME
AUTO
OPEN/CLOSE
3/4
15 SEC
90 SEC
5
Use to select
"15SEC", "30SEC"
or "90SEC"
and then press
[ENTER].
2. AUTO CLOSE
WAITING TIME
3. AUTO OPEN
WAITING TIME
AUTO
OPEN/CLOSE
3/4
30 SEC
90 SEC
AUTO OPEN
WAITING TIME
30 SEC
(To return
¿
)
Automatically open and
close the toilet lid only/
Automatically open and
close the toilet seat and
toilet lid
SEAT/LID
4
Use to select
"SEAT/LID".
3. AUTO OPEN
WAITING TIME
4. SEAT/LID
AUTO
OPEN/CLOSE
4/4
LID
30 SEC
5
Use to select
"LID" or "SEAT
LID" and then press
[ENTER].
3. AUTO OPEN
WAITING TIME
4. SEAT/LID
AUTO
OPEN/CLOSE
4/4
SEAT・LID
30 SEC
AUTO
OPEN/CLOSE
SEAT・LID
(To return
¿
)
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
1
Press [MENU].
2
Use to
select "AUTO
FUNCTIONS"
and then press
[ENTER].
1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTING
MENU 3/4
3
Use to
select "AUTO
OPEN/
CLOSE" and
then press
[ENTER].
AUTO
FUNCTIONS
1/3
1. AUTO
OPEN/CLOSE
CAUTION
The setting items and numbers vary according to the model.
●
42 43
Reference
Changing Settings
AUTO OPEN/CLOSE
Change the time period
till automatic opening
(After closing manually.)
AUTO OPEN
WAITING
TIME
4
Use to select
"AUTO OPEN
WAITING TIME".
2. AUTO CLOSE
WAITING TIME
3. AUTO OPEN
WAITING TIME
AUTO
OPEN/CLOSE
3/4
15 SEC
90 SEC
5
Use to select
"15SEC", "30SEC"
or "90SEC"
and then press
[ENTER].
2. AUTO CLOSE
WAITING TIME
3. AUTO OPEN
WAITING TIME
AUTO
OPEN/CLOSE
3/4
30 SEC
90 SEC
AUTO OPEN
WAITING TIME
30 SEC
(To return
¿
)
Automatically open and
close the toilet lid only/
Automatically open and
close the toilet seat and
toilet lid
SEAT/LID
4
Use to select
"SEAT/LID".
3. AUTO OPEN
WAITING TIME
4. SEAT/LID
AUTO
OPEN/CLOSE
4/4
LID
30 SEC
5
Use to select
"LID" or "SEAT
LID" and then press
[ENTER].
3. AUTO OPEN
WAITING TIME
4. SEAT/LID
AUTO
OPEN/CLOSE
4/4
SEAT・LID
30 SEC
AUTO
OPEN/CLOSE
SEAT・LID
(To return
¿
)
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
1
Press [MENU].
2
Use to
select "AUTO
FUNCTIONS"
and then press
[ENTER].
1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTING
MENU 3/4
3
Use to
select "AUTO
OPEN/
CLOSE" and
then press
[ENTER].
AUTO
FUNCTIONS
1/3
1. AUTO
OPEN/CLOSE
CAUTION
The setting items and numbers vary according to the model.
●
44 45
Reference
Changing Settings
CLEANING
Set whether or not
to clean the wand
automatically
AUTO
WAND
CLEANING
4
Use to select
"AUTO WAND
CLEANING".
CLEANING 1/3
1. AUTO WAND
CLEANING
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
CLEANING 1/3
1. AUTO WAND
CLEANING
OFF
AUTO WAND
CLEANING
OFF
(To return
¿
)
Set whether or not to
spray mist in the toilet
bowl automatically
AUTO
BOWL
CLEANING
4
Use to select
"AUTO BOWL
CLEANING".
CLEANING 2/3
1. AUTO WAND
CLEANING
2. AUTO BOWL
CLEANING
ON
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
CLEANING 2/3
1. AUTO WAND
CLEANING
2. AUTO BOWL
CLEANING
OFF
ON
AUTO BOWL
CLEANING
OFF
(To return
¿
)
Set whether or not to
deodorize automatically
after sitting on the toilet
seat
DEODORIZER
4
Use to select
"DEODORIZER".
CLEANING 3/3
2. AUTO BOWL
CLEANING
3. DEODORIZER
ON
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
CLEANING 3/3
2. AUTO BOWL
CLEANING
3. DEODORIZER
OFF
ON
DEODORIZER
OFF
(To return
¿
)
1
Press [MENU].
2
Use to
select "AUTO
FUNCTIONS"
and then press
[ENTER].
1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTING
MENU 3/4
3
Use to select
"CLEANING"
and then press
[ENTER].
1. AUTO
OPEN/CLOSE
2. CLEANING
AUTO
FUNCTIONS
2/3
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
CAUTION
The setting items and numbers vary according to the model.
●
44 45
Reference
Changing Settings
CLEANING
Set whether or not
to clean the wand
automatically
AUTO
WAND
CLEANING
4
Use to select
"AUTO WAND
CLEANING".
CLEANING 1/3
1. AUTO WAND
CLEANING
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
CLEANING 1/3
1. AUTO WAND
CLEANING
OFF
AUTO WAND
CLEANING
OFF
(To return
¿
)
Set whether or not to
spray mist in the toilet
bowl automatically
AUTO
BOWL
CLEANING
4
Use to select
"AUTO BOWL
CLEANING".
CLEANING 2/3
1. AUTO WAND
CLEANING
2. AUTO BOWL
CLEANING
ON
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
CLEANING 2/3
1. AUTO WAND
CLEANING
2. AUTO BOWL
CLEANING
OFF
ON
AUTO BOWL
CLEANING
OFF
(To return
¿
)
Set whether or not to
deodorize automatically
after sitting on the toilet
seat
DEODORIZER
4
Use to select
"DEODORIZER".
CLEANING 3/3
2. AUTO BOWL
CLEANING
3. DEODORIZER
ON
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
CLEANING 3/3
2. AUTO BOWL
CLEANING
3. DEODORIZER
OFF
ON
DEODORIZER
OFF
(To return
¿
)
1
Press [MENU].
2
Use to
select "AUTO
FUNCTIONS"
and then press
[ENTER].
1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTING
MENU 3/4
3
Use to select
"CLEANING"
and then press
[ENTER].
1. AUTO
OPEN/CLOSE
2. CLEANING
AUTO
FUNCTIONS
2/3
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
CAUTION
The setting items and numbers vary according to the model.
●
46 47
Reference
1
Press [MENU].
2
Use to
select "AUTO
FUNCTIONS"
and then press
[ENTER].
1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTING
MENU 3/4
3
Use to
select "LIGHT"
and then press
[ENTER].
1. AUTO
OPEN/CLOSE
2. CLEANING
3. LIGHT
AUTO
FUNCTIONS
3/3
Changing Settings
LIGHT
Set whether or not
to use the soft light
SOFT
LIGHT
4
Use to select
"SOFT LIGHT".
LIGHT 1/3
1. SOFT LIGHT
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
LIGHT 1/3
1. SOFT LIGHT
OFF
SOFT LIGHT
OFF
(To return
¿
)
Set whether or not to
use the light inside the
toilet bowl
BOWL
LIGHT
4
Use to select
"BOWL LIGHT".
LIGHT 2/3
1. SOFT LIGHT
2. BOWL LIGHT
ON
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
LIGHT 2/3
1. SOFT LIGHT
2. BOWL LIGHT
OFF
ON
BOWL LIGHT
OFF
(To return
¿
)
Set whether or not to
light up the CLEAN
indicator
INDICATOR
4
Use to select
"INDICATOR".
LIGHT 3/3
1. SOFT LIGHT
2. BOWL LIGHT
ON
ON
3. INDICATOR
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
LIGHT 3/3
1. SOFT LIGHT
2. BOWL LIGHT
ON
ON
3. INDICATOR
OFF
INDICATOR
OFF
(To return
¿
)
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
CAUTION
The setting items and numbers vary according to the model.
●
46 47
Reference
1
Press [MENU].
2
Use to
select "AUTO
FUNCTIONS"
and then press
[ENTER].
1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTING
MENU 3/4
3
Use to
select "LIGHT"
and then press
[ENTER].
1. AUTO
OPEN/CLOSE
2. CLEANING
3. LIGHT
AUTO
FUNCTIONS
3/3
Changing Settings
LIGHT
Set whether or not
to use the soft light
SOFT
LIGHT
4
Use to select
"SOFT LIGHT".
LIGHT 1/3
1. SOFT LIGHT
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
LIGHT 1/3
1. SOFT LIGHT
OFF
SOFT LIGHT
OFF
(To return
¿
)
Set whether or not to
use the light inside the
toilet bowl
BOWL
LIGHT
4
Use to select
"BOWL LIGHT".
LIGHT 2/3
1. SOFT LIGHT
2. BOWL LIGHT
ON
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
LIGHT 2/3
1. SOFT LIGHT
2. BOWL LIGHT
OFF
ON
BOWL LIGHT
OFF
(To return
¿
)
Set whether or not to
light up the CLEAN
indicator
INDICATOR
4
Use to select
"INDICATOR".
LIGHT 3/3
1. SOFT LIGHT
2. BOWL LIGHT
ON
ON
3. INDICATOR
ON
5
Use to select
"ON" or "OFF"
and then press
[ENTER].
LIGHT 3/3
1. SOFT LIGHT
2. BOWL LIGHT
ON
ON
3. INDICATOR
OFF
INDICATOR
OFF
(To return
¿
)
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
CAUTION
The setting items and numbers vary according to the model.
●
48 49
Reference
1
Press [MENU].
2
Use
to select
"OTHER
SETTINGS"
and then
press
[ENTER].
1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTINGS
MENU 4/4
Set whether or not to
make a beep sound
BEEP
3
Use to select
"BEEP".
1㧚BEEP
OTHER
SETTINGS
1/3
ON
4
Use to select
"ON" or "OFF"
and then press
[ENTER].
1㧚BEEP
OTHER
SETTINGS
1/3
OFF
BEEP
OFF
(To return
¿
)
Set whether or not to
use the setting lock
SETTING
LOCK
3
Use to select
"SETTING LOCK".
1㧚BEEP
2. SETTING
LOCK
OTHER
SETTINGS
2/3
OFF
ON
4
Use to select
"ON" or "OFF"
and then press
[ENTER].
1㧚BEEP
2. SETTING
LOCK
OTHER
SETTINGS
2/3
ON
ON
SETTING LOCK
PRESS ENTER
FOR 2 SEC
TO RESET
(To return
¿
)
5
Check the displayed screen.
SETTING LOCK
PRESS ENTER
FOR 2 SEC
TO RESET
Cancellation method:
Press [ENTER] for 2 seconds
or longer.
If you want to relock after cancellation,
*
reconfi gure the setting.
Display screen during setting lock
Set whether or not to
use the personal setting
lock
PERSONAL
SETTING
LOCK
3
Use to select
"PERSONAL
SETTING LOCK".
2. SETTING
LOCK
3. PERSONAL
SETTING
LOCK
OTHER
SETTINGS
3/3
ON
OFF
4
Use to select
"ON" or "OFF"
and then press
[ENTER].
2. SETTING
LOCK
3. PERSONAL
SETTING
LOCK
OTHER
SETTINGS
3/3
OFF
OFF
PERSONAL
SETTING LOCK
OFF
(To return
¿
)
Changing Settings
OTHER SETTINGS
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
CAUTION
The setting items and numbers vary according to the model.
●
48 49
Reference
1
Press [MENU].
2
Use
to select
"OTHER
SETTINGS"
and then
press
[ENTER].
1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTINGS
MENU 4/4
Set whether or not to
make a beep sound
BEEP
3
Use to select
"BEEP".
1㧚BEEP
OTHER
SETTINGS
1/3
ON
4
Use to select
"ON" or "OFF"
and then press
[ENTER].
1㧚BEEP
OTHER
SETTINGS
1/3
OFF
BEEP
OFF
(To return
¿
)
Set whether or not to
use the setting lock
SETTING
LOCK
3
Use to select
"SETTING LOCK".
1㧚BEEP
2. SETTING
LOCK
OTHER
SETTINGS
2/3
OFF
ON
4
Use to select
"ON" or "OFF"
and then press
[ENTER].
1㧚BEEP
2. SETTING
LOCK
OTHER
SETTINGS
2/3
ON
ON
SETTING LOCK
PRESS ENTER
FOR 2 SEC
TO RESET
(To return
¿
)
5
Check the displayed screen.
SETTING LOCK
PRESS ENTER
FOR 2 SEC
TO RESET
Cancellation method:
Press [ENTER] for 2 seconds
or longer.
If you want to relock after cancellation,
*
reconfi gure the setting.
Display screen during setting lock
Set whether or not to
use the personal setting
lock
PERSONAL
SETTING
LOCK
3
Use to select
"PERSONAL
SETTING LOCK".
2. SETTING
LOCK
3. PERSONAL
SETTING
LOCK
OTHER
SETTINGS
3/3
ON
OFF
4
Use to select
"ON" or "OFF"
and then press
[ENTER].
2. SETTING
LOCK
3. PERSONAL
SETTING
LOCK
OTHER
SETTINGS
3/3
OFF
OFF
PERSONAL
SETTING LOCK
OFF
(To return
¿
)
Changing Settings
OTHER SETTINGS
WATER
SEAT
DRYER
DIRECTIONAL
TEMPER ATURE
SETT ING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
CAUTION
The setting items and numbers vary according to the model.
●
50 51
Reference
What to Do?
If you cannot operate with the remote control
Operation is also possible using the buttons on
■
the Washlet control panel.
This button cannot be
used.
Washlet control panel
● The batteries may have worn out. Replace the batteries.
Replacing the batteries
■
1
Press on the Washlet control panel.
The POWER LED goes off.
•
2
Remove the remote control from the hanger.
(Page 16)
POWER LED
3
Open the cover and replace the AA batteries.
(Page 16)
4
Mount the remote control in the hanger.
5
Press on the Washlet control panel.
The POWER LED lights up.
•
About the batteries ■
Use dry cell, alkaline batteries. Follow the instructions below to prevent the batteries from rupturing or leaking fl uid.
●
When replacing the batteries, use new batteries of the same brand.
•
If you will not be using the remote control for a long time, remove the batteries.
•
Do not use rechargeable batteries.
•
Freeze Damage Prevention
In preparation for freezing conditions, such as in wintertime, take measures to prevent freezing.
Attention!
Do not use the energy-saver feature if there is a risk of the product being exposed to freezing temperatures.
●
(The product may be damaged.)
Warm the bathroom so that the temperature around the product is not below freezing or take other appropriate
●
measures against freezing temperatures.
Before starting work, set "AUTO OPEN/CLOSE" (S350e, TCF4732A, TCF4731A only) (Page 40) to "OFF".
●
1
Close the water supply valve.
The water supply stops.
•
Water supply valve
CAUTION
Do not remove the water fi lter
drain valve while the water supply
valve is open.
(Otherwise, water may leak out.)
2
Drain the water from the toilet tank.
Turn the fl ush handle
of the toilet tank to
the full fl ush side.
3
Release the pressure from the
water supply pipe.
Remove the remote control from the
1.
hanger, and press [MENU] on the rear
side.
(Page 16)
Use
2.
to select "CLEANING" and then
press [ENTER].
Use
3.
to select "WAND CLEANING
MODE ON/OFF", then press [ENTER].
The wand extends and water comes out.
In the [WAND CLEANING MODE ON/OFF]
4.
screen, press [ENTER] again.
The wand retracts.
Remove the cover.
5.
Cover
Remove the water fi lter drain valve.
6.
Water filter drain valve
Water collector
Drain the water from the water supply hose.
7.
Water supply hose
Position horizontally
After draining the water, mount the water
8.
fi lter drain valve.
Tighten it securely using a fl at-head screwdriver.
•
Water filter drain valve
Mount the cover.
9.
4
Check that the POWER LED on
the Washlet main display has lit up.
(Page 17)
5
Set the toilet seat temperature
to "High".
(Page 26)
(To maintain the temperature, close the toilet seat
and toilet lid after fi nishing work.)
When you use Washlet again, the water supply
■
and power supply will be required. (See below)
Resupplying the Water (After draining)
1
Open the water supply valve to
supply water.
Check that there are no leaks in the
•
plumbing or the Washlet.
2
[USA]
Insert the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to ON.
3
Discharge water from the wand.
While pressing the left side of the toilet
1.
seat,
Press the "REAR" button on the remote
2.
control to discharge water from the
wand. (Catch the water in a paper cup
or other recipient.)
If the remaining water has frozen and
■
no water comes out
Heat the inside of the bathroom, and warm the
•
water supply hose and water supply valve using a
cloth soaked in warm water.
50 51
Reference
What to Do?
If you cannot operate with the remote control
Operation is also possible using the buttons on
■
the Washlet control panel.
This button cannot be
used.
Washlet control panel
● The batteries may have worn out. Replace the batteries.
Replacing the batteries
■
1
Press on the Washlet control panel.
The POWER LED goes off.
•
2
Remove the remote control from the hanger.
(Page 16)
POWER LED
3
Open the cover and replace the AA batteries.
(Page 16)
4
Mount the remote control in the hanger.
5
Press on the Washlet control panel.
The POWER LED lights up.
•
About the batteries ■
Use dry cell, alkaline batteries. Follow the instructions below to prevent the batteries from rupturing or leaking fl uid.
●
When replacing the batteries, use new batteries of the same brand.
•
If you will not be using the remote control for a long time, remove the batteries.
•
Do not use rechargeable batteries.
•
Freeze Damage Prevention
In preparation for freezing conditions, such as in wintertime, take measures to prevent freezing.
Attention!
Do not use the energy-saver feature if there is a risk of the product being exposed to freezing temperatures.
●
(The product may be damaged.)
Warm the bathroom so that the temperature around the product is not below freezing or take other appropriate
●
measures against freezing temperatures.
Before starting work, set "AUTO OPEN/CLOSE" (S350e, TCF4732A, TCF4731A only) (Page 40) to "OFF".
●
1
Close the water supply valve.
The water supply stops.
•
Water supply valve
CAUTION
Do not remove the water fi lter
drain valve while the water supply
valve is open.
(Otherwise, water may leak out.)
2
Drain the water from the toilet tank.
Turn the fl ush handle
of the toilet tank to
the full fl ush side.
3
Release the pressure from the
water supply pipe.
Remove the remote control from the
1.
hanger, and press [MENU] on the rear
side.
(Page 16)
Use
2.
to select "CLEANING" and then
press [ENTER].
Use
3.
to select "WAND CLEANING
MODE ON/OFF", then press [ENTER].
The wand extends and water comes out.
In the [WAND CLEANING MODE ON/OFF]
4.
screen, press [ENTER] again.
The wand retracts.
Remove the cover.
5.
Cover
Remove the water fi lter drain valve.
6.
Water filter drain valve
Water collector
Drain the water from the water supply hose.
7.
Water supply hose
Position horizontally
After draining the water, mount the water
8.
fi lter drain valve.
Tighten it securely using a fl at-head screwdriver.
•
Water filter drain valve
Mount the cover.
9.
4
Check that the POWER LED on
the Washlet main display has lit up.
(Page 17)
5
Set the toilet seat temperature
to "High".
(Page 26)
(To maintain the temperature, close the toilet seat
and toilet lid after fi nishing work.)
When you use Washlet again, the water supply
■
and power supply will be required. (See below)
Resupplying the Water (After draining)
1
Open the water supply valve to
supply water.
Check that there are no leaks in the
•
plumbing or the Washlet.
2
[USA]
Insert the power plug.
[Asia, Oceania]
Switch the breaker on the
distribution board to ON.
3
Discharge water from the wand.
While pressing the left side of the toilet
1.
seat,
Press the "REAR" button on the remote
2.
control to discharge water from the
wand. (Catch the water in a paper cup
or other recipient.)
If the remaining water has frozen and
■
no water comes out
Heat the inside of the bathroom, and warm the
•
water supply hose and water supply valve using a
cloth soaked in warm water.
52 53
Reference
What to Do?
Long Periods of Disuse
If you will be absent from home for a long time in the winter, be sure to drain the water to prevent
freezing.
Also, if the toilet is in a location you will not visit for a long time, drain the water.
(The water in the tank may become contaminated and cause skin infl ammation or other problems.)
How to drain the water
1
Drain the water from the toilet tank.
(Page 51 Steps
)
2
Drain the pipe.
(Page 51 Step
)
[USA]
Do not disconnect the power plug until all the water has drained.
•
[Asia, Oceania]
Do not switch the breaker on the distribution board to OFF until all the water has drained.
•
3
Pull out the water drain lever.
The water comes out from near the wand (about 20 seconds).
•
4
Release your hand to return the water drain
lever to its original position.
5
[USA]
Unplug the power plug.
[Asia, Oceania]
Switch the breaker on the distribution board to OFF.
6
Take appropriate measures for the water remaining in the toilet bowl.
Putting antifreeze in the water remaining in the toilet bowl will reduce its chance of freezing.
•
When you use Washlet again, the water supply and power supply will be required.
■
(Page 51)
Troubleshooting
Please check Þ rst
Is the POWER LED lit?
Does the LED light up when you
■
press [POWER ON/OFF] on the
main unit?
Is the POWER LED ß ickering?
■
The main unit is not mounted properly.
Mount the main unit again.
(Page 34)
Is the breaker on the distribution
■
board turned on?
Check whether there is a power outage or
the breaker has turned "OFF".
POWER LED
POWER ON/OFF
Is the ENERGY SAVER LED lit?
While the LED is lit, energy-saver
■
(page 28)
is in operation,
so the toilet seat temperature may be reduced or the
heater may be turned off.
Is the remote control working?
Are the remote control batteries
■
dead?
Replace the batteries.
(Pages 16, 50)
Is the remote control transmitter
■
or the main unit receiver blocked?
Remove obstructions, dirt, water droplets
or any other blockages.
The remote control
The remote control
uses batteries to
uses batteries to
operate.
operate.
S350e, S300e TCF4731A,TCF4732A
Remote control
transmitter
Main unit receiver Main unit receiver
First, try the actions described on pages 53 to 57. If the problem persists,
consult with the installer, the seller, or the contact referred on the back cover
of this manual.
If the CLEAN indicator no longer lights up...
Consult with the contact referred on the back cover of this manual.
CAUTION
If a water leak occurs,
close the water supply
valve.
52 53
Reference
What to Do?
Long Periods of Disuse
If you will be absent from home for a long time in the winter, be sure to drain the water to prevent
freezing.
Also, if the toilet is in a location you will not visit for a long time, drain the water.
(The water in the tank may become contaminated and cause skin infl ammation or other problems.)
How to drain the water
1
Drain the water from the toilet tank.
(Page 51 Steps
)
2
Drain the pipe.
(Page 51 Step
)
[USA]
Do not disconnect the power plug until all the water has drained.
•
[Asia, Oceania]
Do not switch the breaker on the distribution board to OFF until all the water has drained.
•
3
Pull out the water drain lever.
The water comes out from near the wand (about 20 seconds).
•
4
Release your hand to return the water drain
lever to its original position.
5
[USA]
Unplug the power plug.
[Asia, Oceania]
Switch the breaker on the distribution board to OFF.
6
Take appropriate measures for the water remaining in the toilet bowl.
Putting antifreeze in the water remaining in the toilet bowl will reduce its chance of freezing.
•
When you use Washlet again, the water supply and power supply will be required.
■
(Page 51)
Troubleshooting
Please check Þ rst
Is the POWER LED lit?
Does the LED light up when you
■
press [POWER ON/OFF] on the
main unit?
Is the POWER LED ß ickering?
■
The main unit is not mounted properly.
Mount the main unit again.
(Page 34)
Is the breaker on the distribution
■
board turned on?
Check whether there is a power outage or
the breaker has turned "OFF".
POWER LED
POWER ON/OFF
Is the ENERGY SAVER LED lit?
While the LED is lit, energy-saver
■
(page 28)
is in operation,
so the toilet seat temperature may be reduced or the
heater may be turned off.
Is the remote control working?
Are the remote control batteries
■
dead?
Replace the batteries.
(Pages 16, 50)
Is the remote control transmitter
■
or the main unit receiver blocked?
Remove obstructions, dirt, water droplets
or any other blockages.
The remote control
The remote control
uses batteries to
uses batteries to
operate.
operate.
S350e, S300e TCF4731A,TCF4732A
Remote control
transmitter
Main unit receiver Main unit receiver
First, try the actions described on pages 53 to 57. If the problem persists,
consult with the installer, the seller, or the contact referred on the back cover
of this manual.
If the CLEAN indicator no longer lights up...
Consult with the contact referred on the back cover of this manual.
CAUTION
If a water leak occurs,
close the water supply
valve.
54 55
Reference
Rear and Front Cleansing
Trouble
g
Please check
Ref.
Page
The wand does not
extend.
Page
Can you operate with the Washlet control panel? (Check while sitting on the
●
toilet seat.)
Check "Is the remote control working?"
À
53
Check
Is
the
remote
control
working?
When the temperature is low, it takes time for the wand to come out after the
●
remote control button is pressed because the water must be warmed up first.
18
remote
control
button
is
pressed
because
the
water
must
be
warmed
up
first.
Did you sit on the toilet continuously for 2 hours or longer? (If so, operation is
●
stopped for safety purposes.)ÀStand up from the seat and then use again.
–
stopped
for
safety
purposes.)
Stand
up
from
the
seat
and
then
use
again.
If the water supply pressure drops signifi cantly, for example if water is used
●
elsewhere or if there is a water failure, the function may stop for safety.
[USA]
Disconnect the power plug and wait about 10 seconds before inserting it
À
again.
If the same symptom reappears ÀThere may be a malfunction.
Consult with the contact referred on the back cover of this manual.
[Asia, Oceania]
Switch the breaker on the distribution board to OFF and wait about 10
À
seconds before inserting it again.
If the same symptom reappears ÀThere may be a malfunction.
Consult with the contact referred on the back cover of this manual.
–
Consult
with
the
contact
referred
on
the
back
cover
of
this
manual.
The seat sensor may have diffi culty detecting some sitting postures.
●
Sit back on the toilet seat.
À
11
Sit
back
on
the
toilet
seat.
Are you using a toilet seat cover, a toilet lid cover, or a seat for infants?
●
Remove any covers.
À
When using a seat for infants or a soft highchair, remove after each use.
–
The wand extends but
water does not come
out./
The cleansing water
pressure is weak.
When
using
a
seat
for
infants
or
a
soft
highchair,
remove
after
each
use.
Has a water failure occurred?
●
À
Press the "STOP" button and wait until the water
failure is over.
–
failure
is
over.
Is the water supply valve closed?
●
17
Is the water fi lter drain valve clogged with foreign matter?
●
Clean the filter.
À
37
Is the water pressure set to a low level?
●
19
The cleansing water
is cold.
Is the warm water temperature set to "OFF" or a low level?
●
●
When the temperature of the water supply or the bathroom is low, the water
temperature may be low when fi rst sprayed.
26
–
Stops in the middle of
use.
temperature
may
be
low
when
fi
rst
sprayed.
Rear, soft rear, front, and wide front cleansing stop automatically after 5
●
minutes of continuous use, while drying stops after 10 minutes of continuous
use.
Does the seat switch have diffi culty detecting?
●
Sit back on the toilet seat. If you get up slightly from the seat, or sit forward
À
on the seat, the seating switch may temporarily stop detecting your
presence.
–
11
Water comes out
unexpectedly from
the wand.
presence.
Has the CLEAN indicator lit up in a cycle?
●
The wand is cleaned with clean, sterile water.
•
24
Troubleshooting
Warm Air Drying
Trouble
y g
Please check
Ref.
Page
The dryer temperature
is low.
Page
Is the dryer temperature set to low level?
●
26
Stops in the middle of
use.
Does the seat switch have diffi culty detecting?
●
Sit back on the toilet seat. If you get up slightly from the seat, or sit forward
À
on the seat, the seating switch may temporarily stop detecting your
presence.
11
Toilet Seat and Toilet Lid (AUTO OPEN/CLOSE)
For S350e,TCF4732A,TCF4731A only.
Trouble
, , y
Please check
Ref.
Page
The toilet lid does not
open automatically.
Page
Is "AUTO OPEN/CLOSE" set to "OFF"?
●
ÀSet to "ON".
Even when set to "
●
ON
",
AUTO OPEN/CLOSE is not performed for about 15 seconds
after the toilet seat or toilet lid is closed.
When the toilet lid is closed by hand.
•
(To make the Washlet more user-friendly, a time interval is set from when the lid
is closed to when it will open next.)
Move away from the toilet and wait at least 15 seconds before approaching
À
the toilet bowl again.
Detection by the body sensor may be diffi cult when the room temperature
●
exceeds 86 °F (30 °C).
Open and close by hand.
À
40
–
22
–
Open
and
close
by
hand.
Is "AUTO OPEN WAITING TIME" set to 30SEC or 90SEC?
●
42
[USA]
After the power plug is inserted, the toilet lid does not open automatically for
●
about 10 to 60 seconds. ÀOpen and close by hand.
[Asia, Oceania]
After switching the breaker on the distribution board to ON, the toilet lid does
●
not open automatically for about 10 to 60 seconds. ÀOpen and close by hand.
–
not
open
automatically
for
about
10
to
60
seconds.
Open
and
close
by
hand.
Is a toilet lid or seat cover installed?
●
ÀRemove any covers.
–
The toilet lid does not
close automatically.
Refe
Is "AUTO OPEN/CLOSE" set to "OFF"?
●
ÀSet to "ON".
When the time sitting on or standing in front of the toilet seat is less than 6
●
seconds, the toilet seat and toilet lid will close after about 5 minutes.
If they do not close automatically even though "AUTO OPEN/CLOSE" is set
●
to "ON", the body sensor may be detecting incorrectly.
If there is a reflective object in front, such as a mirror or glass, move the
À
reflective object or use a curtain or other object to block it.
40
–
11
The toilet lid opens
on its own.
erence
ere
nc
j
j
Is the sensor directly exposed to sunlight?
●
Do not directly expose the sensor to sunlight, because it may cause
À
incorrect detection.
Is there a heater within the detection range of the body sensor?
●
Do not place within the detection range of the sensor.
À
Is a urinal or wash basin also installed in the bathroom?
●
The sensor may detect someone using the urinal, causing the toilet lid to open or
À
close.
11
The toilet lid closes
on its own.
55
close.
Is "AUTO OPEN/CLOSE" set to "ON"?
●
Is AUTO CLOSE WAITING TIME set to 25SEC?
●
The seat sensor may have diffi culty detecting some sitting postures.
●
Sit back on the toilet seat.
À
40
11
54 55
Reference
Rear and Front Cleansing
Trouble
g
Please check
Ref.
Page
The wand does not
extend.
Page
Can you operate with the Washlet control panel? (Check while sitting on the
●
toilet seat.)
Check "Is the remote control working?"
À
53
Check
Is
the
remote
control
working?
When the temperature is low, it takes time for the wand to come out after the
●
remote control button is pressed because the water must be warmed up first.
18
remote
control
button
is
pressed
because
the
water
must
be
warmed
up
first.
Did you sit on the toilet continuously for 2 hours or longer? (If so, operation is
●
stopped for safety purposes.)ÀStand up from the seat and then use again.
–
stopped
for
safety
purposes.)
Stand
up
from
the
seat
and
then
use
again.
If the water supply pressure drops signifi cantly, for example if water is used
●
elsewhere or if there is a water failure, the function may stop for safety.
[USA]
Disconnect the power plug and wait about 10 seconds before inserting it
À
again.
If the same symptom reappears ÀThere may be a malfunction.
Consult with the contact referred on the back cover of this manual.
[Asia, Oceania]
Switch the breaker on the distribution board to OFF and wait about 10
À
seconds before inserting it again.
If the same symptom reappears ÀThere may be a malfunction.
Consult with the contact referred on the back cover of this manual.
–
Consult
with
the
contact
referred
on
the
back
cover
of
this
manual.
The seat sensor may have diffi culty detecting some sitting postures.
●
Sit back on the toilet seat.
À
11
Sit
back
on
the
toilet
seat.
Are you using a toilet seat cover, a toilet lid cover, or a seat for infants?
●
Remove any covers.
À
When using a seat for infants or a soft highchair, remove after each use.
–
The wand extends but
water does not come
out./
The cleansing water
pressure is weak.
When
using
a
seat
for
infants
or
a
soft
highchair,
remove
after
each
use.
Has a water failure occurred?
●
À
Press the "STOP" button and wait until the water
failure is over.
–
failure
is
over.
Is the water supply valve closed?
●
17
Is the water fi lter drain valve clogged with foreign matter?
●
Clean the filter.
À
37
Is the water pressure set to a low level?
●
19
The cleansing water
is cold.
Is the warm water temperature set to "OFF" or a low level?
●
●
When the temperature of the water supply or the bathroom is low, the water
temperature may be low when fi rst sprayed.
26
–
Stops in the middle of
use.
temperature
may
be
low
when
fi
rst
sprayed.
Rear, soft rear, front, and wide front cleansing stop automatically after 5
●
minutes of continuous use, while drying stops after 10 minutes of continuous
use.
Does the seat switch have diffi culty detecting?
●
Sit back on the toilet seat. If you get up slightly from the seat, or sit forward
À
on the seat, the seating switch may temporarily stop detecting your
presence.
–
11
Water comes out
unexpectedly from
the wand.
presence.
Has the CLEAN indicator lit up in a cycle?
●
The wand is cleaned with clean, sterile water.
•
24
Troubleshooting
Warm Air Drying
Trouble
y g
Please check
Ref.
Page
The dryer temperature
is low.
Page
Is the dryer temperature set to low level?
●
26
Stops in the middle of
use.
Does the seat switch have diffi culty detecting?
●
Sit back on the toilet seat. If you get up slightly from the seat, or sit forward
À
on the seat, the seating switch may temporarily stop detecting your
presence.
11
Toilet Seat and Toilet Lid (AUTO OPEN/CLOSE)
For S350e,TCF4732A,TCF4731A only.
Trouble
, , y
Please check
Ref.
Page
The toilet lid does not
open automatically.
Page
Is "AUTO OPEN/CLOSE" set to "OFF"?
●
ÀSet to "ON".
Even when set to "
●
ON
",
AUTO OPEN/CLOSE is not performed for about 15 seconds
after the toilet seat or toilet lid is closed.
When the toilet lid is closed by hand.
•
(To make the Washlet more user-friendly, a time interval is set from when the lid
is closed to when it will open next.)
Move away from the toilet and wait at least 15 seconds before approaching
À
the toilet bowl again.
Detection by the body sensor may be diffi cult when the room temperature
●
exceeds 86 °F (30 °C).
Open and close by hand.
À
40
–
22
–
Open
and
close
by
hand.
Is "AUTO OPEN WAITING TIME" set to 30SEC or 90SEC?
●
42
[USA]
After the power plug is inserted, the toilet lid does not open automatically for
●
about 10 to 60 seconds. ÀOpen and close by hand.
[Asia, Oceania]
After switching the breaker on the distribution board to ON, the toilet lid does
●
not open automatically for about 10 to 60 seconds. ÀOpen and close by hand.
–
not
open
automatically
for
about
10
to
60
seconds.
Open
and
close
by
hand.
Is a toilet lid or seat cover installed?
●
ÀRemove any covers.
–
The toilet lid does not
close automatically.
Refe
Is "AUTO OPEN/CLOSE" set to "OFF"?
●
ÀSet to "ON".
When the time sitting on or standing in front of the toilet seat is less than 6
●
seconds, the toilet seat and toilet lid will close after about 5 minutes.
If they do not close automatically even though "AUTO OPEN/CLOSE" is set
●
to "ON", the body sensor may be detecting incorrectly.
If there is a reflective object in front, such as a mirror or glass, move the
À
reflective object or use a curtain or other object to block it.
40
–
11
The toilet lid opens
on its own.
erence
ere
nc
j
j
Is the sensor directly exposed to sunlight?
●
Do not directly expose the sensor to sunlight, because it may cause
À
incorrect detection.
Is there a heater within the detection range of the body sensor?
●
Do not place within the detection range of the sensor.
À
Is a urinal or wash basin also installed in the bathroom?
●
The sensor may detect someone using the urinal, causing the toilet lid to open or
À
close.
11
The toilet lid closes
on its own.
55
close.
Is "AUTO OPEN/CLOSE" set to "ON"?
●
Is AUTO CLOSE WAITING TIME set to 25SEC?
●
The seat sensor may have diffi culty detecting some sitting postures.
●
Sit back on the toilet seat.
À
40
11
56 57
Reference
Troubleshooting
Toilet Seat and Toilet Lid (AUTO OPEN/CLOSE)
For S350e,TCF4732A,TCF4731A only.
Trouble
, , y
Please check
Ref.
Page
The toilet lid and toilet
seat open at the same
time.
Page
Are the settings confi gured to open the toilet lid and toilet seat at the same
●
time?
42
Stops (or closes)
while opening.
[USA]
If the lid or seat hits an obstruction the fi rst time it opens after inserting the
●
power plug, it may stop (or close) partway during the next operation.
While there are no obstructions, disconnect the plug and insert it again
À
after about 5 seconds, and then move out of the toilet room and wait at
least 15 seconds before approaching the toilet bowl again.
[Asia, Oceania]
If the lid or seat hits an obstruction the fi rst time it opens after switching ON
●
the breaker on the distribution board, it may stop (or close) partway during
the next operation.
While there are no obstructions, switch the breaker on the distribution
À
board to OFF and then ON again after about 5 seconds, and then move
out of the toilet room and wait at least 15 seconds before approaching the
toilet bowl again.
17
The open timing has
changed.
toilet
bowl
again.
Detection by the body sensor may be diffi cult when the room temperature
●
exceeds 86 °F (30 °C).
11
Toilet Seat and Toilet Lid
Trouble Please check
Ref.
Page
Cannot open or close
with the remote
control.
Page
If automatic opening works.
●
ÀCheck "Is the remote control working?"
If automatic opening does not work either
●
The toilet seat or toilet lid may not be mounted correctly.
•
Mount them correctly.
À
Incorrect detection may occur when operating under fl uorescent lights.
●
53
35
The toilet seat does
not get warm.
Incorrect
detection
may
occur
when
operating
under
fl
uorescent
lights.
●
Is the toilet seat temperature set to "OFF" or a low level?
●
26
Is the ENERGY SAVER LED (green) lit and is the SEAT LED off?
●
Timer energy-saver is operating and has turned off the toilet seat heater.
•
When you sit on the seat, the heater is turned on temporarily and the seat
À
is warmed in about 15 minutes.
Is the ENERGY SAVER LED (orange) lit?
●
If the SEAT LED is lit as well: Auto energy-saver is operating
•
When you sit, the toilet seat is temporarily heated.
À
28
When
you
sit,
the
toilet
seat
is
temporarily
heated.
Have you been seated for a long time?
●
After about 20 minutes of sitting, the temperature starts going down, and
•
after about 1 hour, the heater is turned "OFF".ÀMove away from the toilet
seat and then go back.
–
seat
and
then
go
back.
The seat sensor may have diffi culty detecting some sitting postures.
●
Sit back on the toilet seat.
À
11
Sit
back
on
the
toilet
seat.
Is a toilet seat or lid cover installed?
●
À
Remove any covers.
–
Energy-Saver
Trouble
gy
Please check
Ref.
Page
The timer energy-
saver feature is not
working.
Page
Did you replace the remote control batteries?
●
When the batteries are discharged, the settings may be erased.
•
Reconfigure the settings.
À
16
30
working.
The auto energy-
saver feature is not
working.
g g
Because the function takes several days learning the usage conditions before
●
starting energy-saver, the amount of energy saving may be low, depending
on the frequency of use.ÀCheck the type of energy saver.
28
Deodorizer
Trouble Please check
Ref.
Page
The deodorizer is not
working.
Page
Even after sitting down, you do not hear operation sounds.
●
Sit back on the toilet seat.
À
ÀSet the deodorizer settings to "ON".
If you hear an operation sound when you sit on the toilet seat.
●
Clean the deodorizing filter.
À
44
33
A strange odor is
emitted.
Clean
the
deodorizing
filte
r.
33
Are you using an air freshener or deodorizer that you purchased separately?
●
Doing so may reduce the effectiveness of the Washlet deodorizer or cause
•
strange odors.
Remove the air freshener or deodorizer.
À
–
The deodorizer is not
working.
Remove
the
air
freshener
or
deodorizer.
Is "DEODORIZER" set to "OFF"?
●
ÀSet to "ON".
44
Sanitary
Trouble
y
Please check
Ref.
Page
The soft light, toilet
bowl LED and CLEAN
indicator do not light up.
Page
Is the setting "OFF"?
●
ÀSet to "ON".
If the CLEAN indicator LED is off, it is time to replace the component that
●
generate a "ewater+". ÀConsult with the installer, the seller, or the contact
referred on the back cover of this manual.
46
back
cover
indicator
do
not
light
up.
The pre-mist sprays
out spontaneously.
referred
on
the
back
cover
of
this
manual.
When body sensor A detects someone, the pre-mist is sprayed.
●
When the bowl has not been cleaned in 8 hours, the mist is sprayed inside the
●
toilet bowl automatically.
25
Refe
Others
Trouble Please check
Re
fe
Ref.
Page
Water is leaking
from the plumbing
connections.
rence
re
nc
e
Page
If any nuts in a connection are loose, fi rmly tighten them with a tool such as a monkey wrench.
●
Water supply hose
Water supply hose connection
Do not use tools on the water supply
hose connection. Tighten it by hand.
If the water leak does not stop, close the water supply valve and seek repair.
À
–
The main unit is
unstable.
57
If
the
water
leak
does
not
stop,
close
the
water
supply
valve
and
seek
repair.
There is clearance between the toilet seat cushion and the toilet bowl for
●
activating the seat sensor. When you sit on the toilet seat, the toilet seat
subsides slightly to activate the seat sensor.
Are the bolts that anchor the main unit loose?
●
Remove the main unit and then firmly tighten the base plate bolts.
À
–
34
56 57
Reference
Troubleshooting
Toilet Seat and Toilet Lid (AUTO OPEN/CLOSE)
For S350e,TCF4732A,TCF4731A only.
Trouble
, , y
Please check
Ref.
Page
The toilet lid and toilet
seat open at the same
time.
Page
Are the settings confi gured to open the toilet lid and toilet seat at the same
●
time?
42
Stops (or closes)
while opening.
[USA]
If the lid or seat hits an obstruction the fi rst time it opens after inserting the
●
power plug, it may stop (or close) partway during the next operation.
While there are no obstructions, disconnect the plug and insert it again
À
after about 5 seconds, and then move out of the toilet room and wait at
least 15 seconds before approaching the toilet bowl again.
[Asia, Oceania]
If the lid or seat hits an obstruction the fi rst time it opens after switching ON
●
the breaker on the distribution board, it may stop (or close) partway during
the next operation.
While there are no obstructions, switch the breaker on the distribution
À
board to OFF and then ON again after about 5 seconds, and then move
out of the toilet room and wait at least 15 seconds before approaching the
toilet bowl again.
17
The open timing has
changed.
toilet
bowl
again.
Detection by the body sensor may be diffi cult when the room temperature
●
exceeds 86 °F (30 °C).
11
Toilet Seat and Toilet Lid
Trouble Please check
Ref.
Page
Cannot open or close
with the remote
control.
Page
If automatic opening works.
●
ÀCheck "Is the remote control working?"
If automatic opening does not work either
●
The toilet seat or toilet lid may not be mounted correctly.
•
Mount them correctly.
À
Incorrect detection may occur when operating under fl uorescent lights.
●
53
35
The toilet seat does
not get warm.
Incorrect
detection
may
occur
when
operating
under
fl
uorescent
lights.
●
Is the toilet seat temperature set to "OFF" or a low level?
●
26
Is the ENERGY SAVER LED (green) lit and is the SEAT LED off?
●
Timer energy-saver is operating and has turned off the toilet seat heater.
•
When you sit on the seat, the heater is turned on temporarily and the seat
À
is warmed in about 15 minutes.
Is the ENERGY SAVER LED (orange) lit?
●
If the SEAT LED is lit as well: Auto energy-saver is operating
•
When you sit, the toilet seat is temporarily heated.
À
28
When
you
sit,
the
toilet
seat
is
temporarily
heated.
Have you been seated for a long time?
●
After about 20 minutes of sitting, the temperature starts going down, and
•
after about 1 hour, the heater is turned "OFF".ÀMove away from the toilet
seat and then go back.
–
seat
and
then
go
back.
The seat sensor may have diffi culty detecting some sitting postures.
●
Sit back on the toilet seat.
À
11
Sit
back
on
the
toilet
seat.
Is a toilet seat or lid cover installed?
●
À
Remove any covers.
–
Energy-Saver
Trouble
gy
Please check
Ref.
Page
The timer energy-
saver feature is not
working.
Page
Did you replace the remote control batteries?
●
When the batteries are discharged, the settings may be erased.
•
Reconfigure the settings.
À
16
30
working.
The auto energy-
saver feature is not
working.
g g
Because the function takes several days learning the usage conditions before
●
starting energy-saver, the amount of energy saving may be low, depending
on the frequency of use.ÀCheck the type of energy saver.
28
Deodorizer
Trouble Please check
Ref.
Page
The deodorizer is not
working.
Page
Even after sitting down, you do not hear operation sounds.
●
Sit back on the toilet seat.
À
ÀSet the deodorizer settings to "ON".
If you hear an operation sound when you sit on the toilet seat.
●
Clean the deodorizing filter.
À
44
33
A strange odor is
emitted.
Clean
the
deodorizing
filte
r.
33
Are you using an air freshener or deodorizer that you purchased separately?
●
Doing so may reduce the effectiveness of the Washlet deodorizer or cause
•
strange odors.
Remove the air freshener or deodorizer.
À
–
The deodorizer is not
working.
Remove
the
air
freshener
or
deodorizer.
Is "DEODORIZER" set to "OFF"?
●
ÀSet to "ON".
44
Sanitary
Trouble
y
Please check
Ref.
Page
The soft light, toilet
bowl LED and CLEAN
indicator do not light up.
Page
Is the setting "OFF"?
●
ÀSet to "ON".
If the CLEAN indicator LED is off, it is time to replace the component that
●
generate a "ewater+". ÀConsult with the installer, the seller, or the contact
referred on the back cover of this manual.
46
back
cover
indicator
do
not
light
up.
The pre-mist sprays
out spontaneously.
referred
on
the
back
cover
of
this
manual.
When body sensor A detects someone, the pre-mist is sprayed.
●
When the bowl has not been cleaned in 8 hours, the mist is sprayed inside the
●
toilet bowl automatically.
25
Refe
Others
Trouble Please check
Re
fe
Ref.
Page
Water is leaking
from the plumbing
connections.
rence
re
nc
e
Page
If any nuts in a connection are loose, fi rmly tighten them with a tool such as a monkey wrench.
●
Water supply hose
Water supply hose connection
Do not use tools on the water supply
hose connection. Tighten it by hand.
If the water leak does not stop, close the water supply valve and seek repair.
À
–
The main unit is
unstable.
57
If
the
water
leak
does
not
stop,
close
the
water
supply
valve
and
seek
repair.
There is clearance between the toilet seat cushion and the toilet bowl for
●
activating the seat sensor. When you sit on the toilet seat, the toilet seat
subsides slightly to activate the seat sensor.
Are the bolts that anchor the main unit loose?
●
Remove the main unit and then firmly tighten the base plate bolts.
À
–
34
58 59
Reference
SpeciÞ cations
S350e
S300e
Item
S350e
(S584)
S300e
(S574)
S350e
(S583)
S300e
(S573)
Rated power supply AC 120 V, 60 Hz
Rated power consumption 835 W
Maximum power consumption 1412 W (When the water supply temperature is 32 °F (0 °C))
Type Instantaneous
Power cord length 3.94 ft (1.2 m)
Washlet
function
Washlet
Spray
volume
Rear cleansing
Approx. 0.07 to 0.11 gal/min. (Approx. 0.27 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Soft rear cleansing
Approx. 0.08 to 0.11 gal/min. (Approx. 0.32 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Front cleansing
Approx. 0.08 to 0.11 gal/min. (Approx. 0.29 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Wide front cleansing
Approx. 0.09 to 0.11 gal/min. (Approx. 0.35 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Water temperature
Temperature adjustable range: OFF, about 86 to 104 °F (about 30 to 40 °C)
Heater capacity 1332 W
Safety device Temperature fuse
Backß ow prevention device Vacuum breaker, check valve
Dryer
Warm air temperature
*
Temperature adjustable range: About 95 to 140 °F (About 35 to 60 °C)
Airß ow volume 10.24 ft
3
/min. (0.29 m
3
/min.)
Heater capacity 346.5 W
Safety device Temperature fuse
Heated seat
Surface temperature
Temperature adjustable range: OFF, about 82 to 97 °F (about 28 to 36 °C)
<In auto energy-saver: About 79 °F (About 26 °C)>
Heater capacity 49.5 W
Safety device Temperature fuse
Deodorizer
Method O
2
deodorizing
Airß ow volume Approx. 5.65 ft
3
/min. (Approx. 0.16 m
3
/min.)
Power consumption Approx. 5.3 W
Water supply pressure
Minimum required water pressure: 7.25 PSI (0.05 MPa) <Dynamic>
Maximum water pressure: 108.75 PSI (0.75 MPa) <Static>
Supply water temperature 32 to 95 °F (0 to 35 °C)
Working ambient temperature 32 to 104 °F (0 to 40 °C)
Dimensions
W1.28 ft, D1.74 ft, H0.32 ft
(W390 mm, D529 mm, H99 mm)
W1.28 ft, D1.57 ft, H0.32 ft
(W390 mm, D480 mm, H99 mm)
Weight
Approx. 11.2 lb
(Approx. 5.1 kg)
Approx. 10.1 lb
(Approx. 4.6 kg)
Approx. 10.8 lb
(Approx. 4.9 kg)
Approx. 9.7 lb
(Approx. 4.4 kg)
Temperature around the warm air outlet measured by TOTO.
*
Item TCF4732A TCF4731A
Rated power supply AC 220 V, 50/60 Hz
Rated power consumption 830 W
Maximum power consumption 1275 W (When the water supply temperature is 32 °F (0 °C))
Type Instantaneous
Power cord length 3.94 ft (1.2 m)
Washlet
function
Washlet
Spray
volume
Rear cleansing
Approx. 0.07 to 0.11 gal/min. (Approx. 0.27 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Soft rear cleansing
Approx. 0.08 to 0.11 gal/min. (Approx. 0.32 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Front cleansing
Approx. 0.08 to 0.11 gal/min. (Approx. 0.29 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Wide front cleansing
Approx. 0.09 to 0.11 gal/min. (Approx. 0.35 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Water temperature
Temperature adjustable range: OFF, about 86 to 104 °F (about 30 to 40 °C)
Heater capacity 1200 W
Safety device Temperature fuse
Backß ow prevention device Vacuum breaker, check valve
Dryer
Warm air temperature
*
Temperature adjustable range: About 95 to 140 °F (About 35 to 60 °C)
Airß ow volume 10.24 ft
3
/min. (0.29 m
3
/min.)
Heater capacity 237.7 W
Safety device Temperature fuse
Heated seat
Surface temperature
Temperature adjustable range: OFF, about 82 to 97 °F (about 28 to 36 °C)
<In auto energy-saver: About 79 °F (About 26 °C)>
Heater capacity 45.4 W
Safety device Temperature fuse
Deodorizer
Method O
2
deodorizing
Airß ow volume Approx. 5.65 ft
3
/min. (Approx. 0.16 m
3
/min.)
Power consumption Approx. 5.3 W
Water supply pressure
Minimum required water pressure: 7.25 PSI (0.05 MPa) <Dynamic>
Maximum water pressure: 108.75 PSI (0.75 MPa) <Static>
Supply water temperature 32 to 95 °F (0 to 35 °C)
Working ambient temperature 32 to 104 °F (0 to 40 °C)
Dimensions
W1.28 ft, D1.71 ft, H0.43 ft
(W390 mm, D520 mm, H130 mm)
W1.28 ft, D1.74 ft, H0.43 ft
(W390 mm, D529 mm, H130 mm)
Weight
Approx. 10.8 lb (Approx. 4.9 kg) Approx. 10.8 lb (Approx. 4.9 kg)
Temperature around the warm air outlet measured by TOTO.
*
SpeciÞ cations
58 59
Reference
SpeciÞ cations
S350e
S300e
Item
S350e
(S584)
S300e
(S574)
S350e
(S583)
S300e
(S573)
Rated power supply AC 120 V, 60 Hz
Rated power consumption 835 W
Maximum power consumption 1412 W (When the water supply temperature is 32 °F (0 °C))
Type Instantaneous
Power cord length 3.94 ft (1.2 m)
Washlet
function
Washlet
Spray
volume
Rear cleansing
Approx. 0.07 to 0.11 gal/min. (Approx. 0.27 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Soft rear cleansing
Approx. 0.08 to 0.11 gal/min. (Approx. 0.32 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Front cleansing
Approx. 0.08 to 0.11 gal/min. (Approx. 0.29 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Wide front cleansing
Approx. 0.09 to 0.11 gal/min. (Approx. 0.35 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Water temperature
Temperature adjustable range: OFF, about 86 to 104 °F (about 30 to 40 °C)
Heater capacity 1332 W
Safety device Temperature fuse
Backß ow prevention device Vacuum breaker, check valve
Dryer
Warm air temperature
*
Temperature adjustable range: About 95 to 140 °F (About 35 to 60 °C)
Airß ow volume 10.24 ft
3
/min. (0.29 m
3
/min.)
Heater capacity 346.5 W
Safety device Temperature fuse
Heated seat
Surface temperature
Temperature adjustable range: OFF, about 82 to 97 °F (about 28 to 36 °C)
<In auto energy-saver: About 79 °F (About 26 °C)>
Heater capacity 49.5 W
Safety device Temperature fuse
Deodorizer
Method O
2
deodorizing
Airß ow volume Approx. 5.65 ft
3
/min. (Approx. 0.16 m
3
/min.)
Power consumption Approx. 5.3 W
Water supply pressure
Minimum required water pressure: 7.25 PSI (0.05 MPa) <Dynamic>
Maximum water pressure: 108.75 PSI (0.75 MPa) <Static>
Supply water temperature 32 to 95 °F (0 to 35 °C)
Working ambient temperature 32 to 104 °F (0 to 40 °C)
Dimensions
W1.28 ft, D1.74 ft, H0.32 ft
(W390 mm, D529 mm, H99 mm)
W1.28 ft, D1.57 ft, H0.32 ft
(W390 mm, D480 mm, H99 mm)
Weight
Approx. 11.2 lb
(Approx. 5.1 kg)
Approx. 10.1 lb
(Approx. 4.6 kg)
Approx. 10.8 lb
(Approx. 4.9 kg)
Approx. 9.7 lb
(Approx. 4.4 kg)
Temperature around the warm air outlet measured by TOTO.
*
Item TCF4732A TCF4731A
Rated power supply AC 220 V, 50/60 Hz
Rated power consumption 830 W
Maximum power consumption 1275 W (When the water supply temperature is 32 °F (0 °C))
Type Instantaneous
Power cord length 3.94 ft (1.2 m)
Washlet
function
Washlet
Spray
volume
Rear cleansing
Approx. 0.07 to 0.11 gal/min. (Approx. 0.27 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Soft rear cleansing
Approx. 0.08 to 0.11 gal/min. (Approx. 0.32 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Front cleansing
Approx. 0.08 to 0.11 gal/min. (Approx. 0.29 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Wide front cleansing
Approx. 0.09 to 0.11 gal/min. (Approx. 0.35 to 0.43 L/min.)
<at 29 PSI (0.20 MPa) water pressure>
Water temperature
Temperature adjustable range: OFF, about 86 to 104 °F (about 30 to 40 °C)
Heater capacity 1200 W
Safety device Temperature fuse
Backß ow prevention device Vacuum breaker, check valve
Dryer
Warm air temperature
*
Temperature adjustable range: About 95 to 140 °F (About 35 to 60 °C)
Airß ow volume 10.24 ft
3
/min. (0.29 m
3
/min.)
Heater capacity 237.7 W
Safety device Temperature fuse
Heated seat
Surface temperature
Temperature adjustable range: OFF, about 82 to 97 °F (about 28 to 36 °C)
<In auto energy-saver: About 79 °F (About 26 °C)>
Heater capacity 45.4 W
Safety device Temperature fuse
Deodorizer
Method O
2
deodorizing
Airß ow volume Approx. 5.65 ft
3
/min. (Approx. 0.16 m
3
/min.)
Power consumption Approx. 5.3 W
Water supply pressure
Minimum required water pressure: 7.25 PSI (0.05 MPa) <Dynamic>
Maximum water pressure: 108.75 PSI (0.75 MPa) <Static>
Supply water temperature 32 to 95 °F (0 to 35 °C)
Working ambient temperature 32 to 104 °F (0 to 40 °C)
Dimensions
W1.28 ft, D1.71 ft, H0.43 ft
(W390 mm, D520 mm, H130 mm)
W1.28 ft, D1.74 ft, H0.43 ft
(W390 mm, D529 mm, H130 mm)
Weight
Approx. 10.8 lb (Approx. 4.9 kg) Approx. 10.8 lb (Approx. 4.9 kg)
Temperature around the warm air outlet measured by TOTO.
*
SpeciÞ cations
60 61
Reference
Limited Warranty
1. TOTO warrants its washlet series ("Washlet") to be free from defects in materials and workmanship during normal use when
properly installed and serviced, for a period of one (1) year from date of purchase. This limited warranty is extended only to
the ORIGINAL PURCHASER of the Washlet and is not transferable to any third party, including but not limited to any
subsequent purchaser or owner of the Washlet. This warranty applies only to TOTO Washlet is purchased and installed in
North, Central and South America.
2. TOTO's obligations under this warranty are limited to repair, replacement or other appropriate adjustment, at TOTO's option, of
the Washlet or parts found to be defective in normal use, provided that such Washlet was properly installed, used and
serviced in accordance with instructions.
TOTO reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. TOTO
will not charge for labor or parts in connection with warranty repairs or replacements. TOTO is not responsible for the cost of
removal, return and/or reinstallation of the Washlet.
3.This warranty does not apply to the following items:
a) Damage or loss sustained in a natural calamity such as fire, earthquake, flood, thunder, electrical storm, etc.
b) Damage or loss resulting from any accident, unreasonable use, misuse, abuse, negligence, or improper care, cleaning, or
maintenance of the Washlet.
c) Damage or loss resulting from sediments or foreign matter contained in a water system.
d) Damage or loss resulting from improper installation or from installation of the Washlet in a harsh and/or hazardous
environment, or improper removal, repair or modification of the Washlet. This includes locations where the water pressure
is above local codes or standards. (NOTE : Washlet model codes allow a maximum of 80 PSI. Check local codes or
standards for requirements).
e) Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the fault of TOTO or which
the Washlet is not specified to tolerate.
f) Damage or loss resulting from normal and customary wear and tear, such as gloss reduction, scratching or fading over
time due to use, cleaning practices or water or atmospheric conditions.
4. If the Danger Label which has been placed over the seams on the back of the Product s top unit is broken or otherwise not
intact, this limited warranty is void.
5. In order for this limited warranty to be valid, proof of purchase is required. TOTO encourages warranty registration upon
purchase to create a record of Product ownership at http://www.totousa.com. Product registration is completely voluntary and
failure to register will not diminish your limited warranty rights.
6. If the Product is used commercially or is installed outside of North, Central or South America, TOTO warrants the Product to
be free from defects in materials and workmanship during normal use for one (1) year from the date of installation of the
Product, and all other terms of this warranty shall be applicable except the duration of the warranty.
7. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE, PROVINCE TO PROVINCE OR COUNTRY TO COUNTRY.
8. To obtain warranty repair service under this warranty, you must take the Product or deliver it prepaid to a TOTO service facility
together with proof of purchase (original sales receipt) and a letter stating the problem, or contact a TOTO distributor or
products service contractor, or write directly to TOTO U.S.A., INC., 1155 Southern Road, Morrow, GA 30260 (888) 295 8134
or (678) 466-1300, if outside the U.S.A. If, because of the size of the Product or nature of the defect, the Product cannot be
returned to TOTO, receipt by TOTO of written notice of the defect together with proof of purchase (original sales receipt) shall
constitute delivery. In such case, TOTO
may choose to repair the Product at the purchase'r s location or pay to transport the
Product to a service facility.
WARNING! TOTO shall not be responsible or liable for any failure of, or damage to, this Product caused by either chloramines
in the treatment of public water supply or cleaners containing chlorine (calcium hypochlorite).
NOTE: The use of a high concentrate chlorine or chlorine related product's can seriously damage the fittings. This damage
can cause leakage and serious property damage.
THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY TOTO. REPAIR, REPLACEMENT OR OTHER
APPROPRIATE ADJUSTMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY
AVAILABLE TO THE ORIGINAL PURCHASER. TOTO SHALL NOT BE RESPONSIBLE FOR LOSS OF THE PRODUCT OR
FOR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE ORIGINAL
PURCHASER, OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL, OR COSTS OF REPAIRS BY
OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. IN NO EVENT WILL TOTO'S
RESPONSIBILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR USE OR
FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.
S350e,S300e
Warranty
LIMITED ONE YEAR WARRANTY
1.
TOTO warrants its products to be free from manufacturing defects under normal use and service for a period of
one (1) year from the date of purchase. This warranty is extended only to the ORIGINAL PURCHASER.
2.
TOTO’s obligations under this warranty are limited to repair or replacement, at TOTO’s option, of products or parts
found to be defective, provided that such products were properly installed and used in accordance with this
OWNER'S MANUAL. TOTO reserves the right to make such inspections as may be necessary to determine the
cause of the defect. TOTO will not charge for labor or parts in connection with warranty repairs or replacements.
TOTO is not responsible for the cost of removal, return and/or reinstallation of products.
3. This warranty does not apply to the following items:
a) Damage or loss sustained in a natural calamity such as fire, earthquake, flood, thunder, electrical storm, etc.
b) Damage or loss resulting from any unreasonable use, misuse, abuse, negligence, or improper maintenance of
the product.
c) Damage or loss resulting from removal, improper repair, or modification of the product.
d) Damage or loss resulting from sediments or foreign matter contained in a water system.
e)
f)
g)
Damage or loss resulting from improper installation or from installation of a unit in a harsh and/or hazardous
environment.
Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the fault of TOTO
or which the Washlet is not specified to tolerate.
Damage or loss resulting from normal and customary wear and tear, such as gloss reduction, scratching or
fading over time due to use, cleaning practices or water or atmospheric conditions.
4. This warranty gives you specific legal rights. You may have other rights which vary from country to country.
5. To obtain warranty repair service under this warranty, you must take the product or deliver it prepaid to a TOTO
service facility, together with a letter stating the problem, or contact a TOTO distributor or product service
contractor, or directly to TOTO sales office. If, because of the size of the product or nature of the defect, the
product can not be returned to TOTO, receipt by TOTO of written notice of the defect shall constitute delivery.
In such case, TOTO may choose to repair the product at the purchaser's location or pay to transport the product to
a service facility.
THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY TOTO. REPAIR OR
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE
REMEDY AVAILABLE TO THE PURCHASER. TOTO SHALL NOT BE RESPONSIBLE FOR
LOSS OF USE OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL, OR
CONSEQUENTIAL DAMAGE OR EXPENSES INCURRED BY PURCHASER, OR FOR LABOR
OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL, OR COSTS OF REPAIRS BY
OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. EXCEPT TO
THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING
THAT OF MERCHANTABILITY OR FITNESS FOR USE, ARE EXPRESSLY LIMITED TO THE
DURATION OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGE, SO THE ABOVE LIMITATION AND EXCLUSION
MAY NOT APPLY TO YOU.
TCF4732A,TCF4731A
WARNING! TOTO shall not be responsible or liable for any failure of, or damage to, this Product caused by either
chloramines in the treatment of public water supply or cleaners containing chlorine (calcium hypochlorite).
NOTE: The use of a high concentrate chlorine or chlorine related product's can seriously damage the fittings.
This damage can cause leakage and serious property damage.
60 61
Reference
Limited Warranty
1. TOTO warrants its washlet series ("Washlet") to be free from defects in materials and workmanship during normal use when
properly installed and serviced, for a period of one (1) year from date of purchase. This limited warranty is extended only to
the ORIGINAL PURCHASER of the Washlet and is not transferable to any third party, including but not limited to any
subsequent purchaser or owner of the Washlet. This warranty applies only to TOTO Washlet is purchased and installed in
North, Central and South America.
2. TOTO's obligations under this warranty are limited to repair, replacement or other appropriate adjustment, at TOTO's option, of
the Washlet or parts found to be defective in normal use, provided that such Washlet was properly installed, used and
serviced in accordance with instructions.
TOTO reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. TOTO
will not charge for labor or parts in connection with warranty repairs or replacements. TOTO is not responsible for the cost of
removal, return and/or reinstallation of the Washlet.
3.This warranty does not apply to the following items:
a) Damage or loss sustained in a natural calamity such as fire, earthquake, flood, thunder, electrical storm, etc.
b) Damage or loss resulting from any accident, unreasonable use, misuse, abuse, negligence, or improper care, cleaning, or
maintenance of the Washlet.
c) Damage or loss resulting from sediments or foreign matter contained in a water system.
d) Damage or loss resulting from improper installation or from installation of the Washlet in a harsh and/or hazardous
environment, or improper removal, repair or modification of the Washlet. This includes locations where the water pressure
is above local codes or standards. (NOTE : Washlet model codes allow a maximum of 80 PSI. Check local codes or
standards for requirements).
e) Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the fault of TOTO or which
the Washlet is not specified to tolerate.
f) Damage or loss resulting from normal and customary wear and tear, such as gloss reduction, scratching or fading over
time due to use, cleaning practices or water or atmospheric conditions.
4. If the Danger Label which has been placed over the seams on the back of the Product s top unit is broken or otherwise not
intact, this limited warranty is void.
5. In order for this limited warranty to be valid, proof of purchase is required. TOTO encourages warranty registration upon
purchase to create a record of Product ownership at http://www.totousa.com. Product registration is completely voluntary and
failure to register will not diminish your limited warranty rights.
6. If the Product is used commercially or is installed outside of North, Central or South America, TOTO warrants the Product to
be free from defects in materials and workmanship during normal use for one (1) year from the date of installation of the
Product, and all other terms of this warranty shall be applicable except the duration of the warranty.
7. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE, PROVINCE TO PROVINCE OR COUNTRY TO COUNTRY.
8. To obtain warranty repair service under this warranty, you must take the Product or deliver it prepaid to a TOTO service facility
together with proof of purchase (original sales receipt) and a letter stating the problem, or contact a TOTO distributor or
products service contractor, or write directly to TOTO U.S.A., INC., 1155 Southern Road, Morrow, GA 30260 (888) 295 8134
or (678) 466-1300, if outside the U.S.A. If, because of the size of the Product or nature of the defect, the Product cannot be
returned to TOTO, receipt by TOTO of written notice of the defect together with proof of purchase (original sales receipt) shall
constitute delivery. In such case, TOTO
may choose to repair the Product at the purchase'r s location or pay to transport the
Product to a service facility.
WARNING! TOTO shall not be responsible or liable for any failure of, or damage to, this Product caused by either chloramines
in the treatment of public water supply or cleaners containing chlorine (calcium hypochlorite).
NOTE: The use of a high concentrate chlorine or chlorine related product's can seriously damage the fittings. This damage
can cause leakage and serious property damage.
THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY TOTO. REPAIR, REPLACEMENT OR OTHER
APPROPRIATE ADJUSTMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY
AVAILABLE TO THE ORIGINAL PURCHASER. TOTO SHALL NOT BE RESPONSIBLE FOR LOSS OF THE PRODUCT OR
FOR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE ORIGINAL
PURCHASER, OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL, OR COSTS OF REPAIRS BY
OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. IN NO EVENT WILL TOTO'S
RESPONSIBILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR USE OR
FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.
S350e,S300e
Warranty
LIMITED ONE YEAR WARRANTY
1.
TOTO warrants its products to be free from manufacturing defects under normal use and service for a period of
one (1) year from the date of purchase. This warranty is extended only to the ORIGINAL PURCHASER.
2.
TOTO’s obligations under this warranty are limited to repair or replacement, at TOTO’s option, of products or parts
found to be defective, provided that such products were properly installed and used in accordance with this
OWNER'S MANUAL. TOTO reserves the right to make such inspections as may be necessary to determine the
cause of the defect. TOTO will not charge for labor or parts in connection with warranty repairs or replacements.
TOTO is not responsible for the cost of removal, return and/or reinstallation of products.
3. This warranty does not apply to the following items:
a) Damage or loss sustained in a natural calamity such as fire, earthquake, flood, thunder, electrical storm, etc.
b) Damage or loss resulting from any unreasonable use, misuse, abuse, negligence, or improper maintenance of
the product.
c) Damage or loss resulting from removal, improper repair, or modification of the product.
d) Damage or loss resulting from sediments or foreign matter contained in a water system.
e)
f)
g)
Damage or loss resulting from improper installation or from installation of a unit in a harsh and/or hazardous
environment.
Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the fault of TOTO
or which the Washlet is not specified to tolerate.
Damage or loss resulting from normal and customary wear and tear, such as gloss reduction, scratching or
fading over time due to use, cleaning practices or water or atmospheric conditions.
4. This warranty gives you specific legal rights. You may have other rights which vary from country to country.
5. To obtain warranty repair service under this warranty, you must take the product or deliver it prepaid to a TOTO
service facility, together with a letter stating the problem, or contact a TOTO distributor or product service
contractor, or directly to TOTO sales office. If, because of the size of the product or nature of the defect, the
product can not be returned to TOTO, receipt by TOTO of written notice of the defect shall constitute delivery.
In such case, TOTO may choose to repair the product at the purchaser's location or pay to transport the product to
a service facility.
THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY TOTO. REPAIR OR
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE
REMEDY AVAILABLE TO THE PURCHASER. TOTO SHALL NOT BE RESPONSIBLE FOR
LOSS OF USE OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL, OR
CONSEQUENTIAL DAMAGE OR EXPENSES INCURRED BY PURCHASER, OR FOR LABOR
OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL, OR COSTS OF REPAIRS BY
OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. EXCEPT TO
THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING
THAT OF MERCHANTABILITY OR FITNESS FOR USE, ARE EXPRESSLY LIMITED TO THE
DURATION OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGE, SO THE ABOVE LIMITATION AND EXCLUSION
MAY NOT APPLY TO YOU.
TCF4732A,TCF4731A
WARNING! TOTO shall not be responsible or liable for any failure of, or damage to, this Product caused by either
chloramines in the treatment of public water supply or cleaners containing chlorine (calcium hypochlorite).
NOTE: The use of a high concentrate chlorine or chlorine related product's can seriously damage the fittings.
This damage can cause leakage and serious property damage.
62 63
Reference
MEMO MEMO
62 63
Reference
MEMO MEMO
