Loading ...
Loading ...
Loading ...
- 3 -
• While the product operates, avoid exposing your eyes to the emitting laser beam
(red light source). Exposure to a laser beam for an extended time may be
hazardous to your eyes.
CAUTION:
• Glasses may be supplied in some of the laser tool kits. However, these are NOT
certified safety glasses. These glasses are ONLY used to enhance the beam's
visibility in brighter environments or at greater distances from a laser source.
WARNING:
• The following label/print samples are placed on the product to inform of the laser
class for your convenience and safety.
• Do not stare directly into the beam or view with optical instruments, or set up the
laser at eye level.
• Do not disassemble the laser tool. There are no user serviceable parts inside.
• Do not modify the laser in any way. Modifying the tool may result in hazardous
Laser Radiation Exposure.
• Do not operate the laser around children or allow children to operate the laser.
Serious eye injury may result.
An exposure to the beam of a Class 2 laser is considered safe for a maximum of
0.25 seconds. Eyelid reflexes will normally provide adequate protection.
Operation Modes
General Notes:
• Press or slide locking switch to turn laser tool ON; short press to turn laser tool
OFF when the laser tool is locked with a pendulum.
• Press repeatedly to cycle through the available modes.
Self-leveling Mode
- is enabled when the laser tool is switched to the unlocked position.
Loading ...
Loading ...
Loading ...