Loading ...
Loading ...
Loading ...
www.PyleUSA.com
18
• Align and connect the 1-pin charging cable into the charging
port of the Hurtle Scooter.
(DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY
CAUSE THE PRONGS TO BEND OR BREAK.)
• The charging indicator light on the charger itself should change
to RED, indicating that your device is now being charged.
• When the RED indicator light on your charger turns to GREEN,
then your device is fully charged.
• After fully charging your Hurtle Scooter, unplug the charger
from your device and from the power outlet.
CAUTION
Only use the included charging cable and charger to charge your
Hurtle Scooter. Using any other unauthorized charger may damage
your Hurtle Scooter.
WARNING
Any scooter that does not work properly can cause you to lose
control and fall. Inspect the entire device thoroughly before every
ride, and do not ride it until any problems have been corrected.
PREPARING YOUR SCOOTER
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
ATTACHING THE HANDLEBAR KIT
Attach the handle bar kit by
placing it into the steering
column, align the front and
back screw holes, and tighten
the 4 screws into place using
the Allan wrench provided.
Loading ...
Loading ...
Loading ...