Loading ...
Loading ...
Loading ...
PERFORMANCEDATASHEETS
Base Grille Water Filtration System
Model TlWB2LfTIRFWB2 Capacity 200 Gallons (758 Liters)
Model TlWB2/TIRFWB2 Capacity 200 Gallons (758 Liters)
(_ System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction
of Chlorine Taste and Odor, Particulate Class I*; and against NSF/ANSl Standard 53 for the
reduction of Lead, Mercury, Atrazine, Benzene, Toxaphene, O-Dichlorobenzene, Cysts, Turbidity,
Asbestos, Lindane, Tetrachloroethylene, Endrin, Alachlor, Monochlorobenzene and Ethylbenzene.
This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances listed below. The
concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the
permissible limit for water leaving the system, as specified in NSF/ANSl Standards 42 and 53.
Substance Reduction NSF Reduction Average
Aesthetic Effects Requirements Influent
Chlorine Taste/Odor 50% reduction 2.0 mg/L
Particulate Class I* 85% reduction 3533333#/mL
Contaminant NSF Reduction Average
Reduction Requirements Influent
Lead: @ pH 6.5 0.010 mg/L 150 ug/L
Lead: @ pH 8.5 0.010 mg/L 157 ug/L
Mercury: @ pH 6.5 0.002 mg/L 0.0058 mg/L
Mercury: @ pH 8.5 0.002 mg/L 0.0057 mg/L
Benzene 0.005 mg/L 15 ug/L
O-Dichlorobenzene 0.6 mg/L 1750 ug/L
Influent Challenge Maximum Average Minimum % Average %
Concentration Effluent Effluent Reduction Reduction
2.0 mg/L_+10% 0.08mg/L ** 2.0mg/L 95.93 97.36
At east 10,000 part c es/mL 22000 #/mL 11567 #/mL 99.38 99.67
Influent Challenge Maximum Average Minimum % Average %
Concentration Effluent Effluent Reduction Reduction
0.15 mg/L _+10% 1.0 ug/L 1 ug/L 99.33 99.33
0.15 mg/L _+10% 2.0 ug/L 1.08 ug/L 98.72 99.31
0.006 mg/L _+10% 0.0002 mg/L 0.0002 mg/L 96.53 96.53
0.006 mg/L _+10% 0.0002 mg/L 0.0002 mg/L 96.5 96.5
0.015 mg/L _+10% 0.5 ug/L 0.5 ug/L 96.67 96.67
1.8 _+10% 1.0 ug/L 1.0 ug/L 99.94 99.94
Toxaphene
Atrazine
Asbestos
Live Cysts*
Turbidity
Alachlor
Endrin
Ethylbenzene
Lindane
Monochlorobenzene
Tetrachloroethylene
0.003 mg/L
0.003 mg/L
99%
>99.95%
0.5 NTU
0.002 mg/L
0.002 mg/L
0.7 mg/L
0.002 mg/L
0.6 mg/L
0.005 mg/L
15 ug/L
10 ug/L
101 MFL
120,000/L
11.4 NTU
41.3 ug/L
5.9 ug/L
1867 ug/L
1.9 ug/L
2.0 ug/L
14.2 ug/L
0.015 _+10%
0.009 mg/L _+10%
107to 1@fibers/L *t
50,000/L min.
11 _+1 NTU
0,04 =+ 10%
0.006 _+10%
2.1 _+10%
0.002 _+10%
2.0 _+10%
0.015 _+10%
1.0 ug/L
2 ug/L
0.17 MFL
8/U
0.41 NTU
0.2 ug/L
0.5 ug/L
0.70 ug/L
0.02 ug/L
0.0005 ug/L
0.5 ug/L
1.0 ug/L
2 ug/L
0.17 MFL
1/U
0.24 NTU
0.2 ug/L
0.3 ug/L
0.0588 ug/L
0.02 ug/L
0.0005 ug/L
0.5 ug/L
93.33
80.8
99.83
99.99
96.4
99.52
91.5
99.96
98.93
99.98
96.47
93.33
80.8
99.83
>99.99
97.89
99.52
95.47
100
98.93
99.98
96.47
Test Parameters: pH = 7.5 + 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa).
Temp. = 68°F to 71.6°F (2O°C to 22°C).
• It is essential that operational, maintenance, and filter
replacement requirements be carried out for the product to
perform as advertised.
• Use replacement cartridge T1RFWB2, part #4396710.
2007 suggested retail price of $39.99 U.S.A./S49.99 Canada.
Prices are subject to change without notice.
Model TlWB2L: Style 1 - When the filter indicator reads 10%,
order a new filter. When the filter indicator reads 0%, it is
recommended that you replace the filter.
Style 2 - When the filter indicator light changes from green to
yellow, order a new filter. When the filter indicator light changes
from yellow to red, it is recommended that you replace the filter.
Model TIWB2: Change the water filter cartridge every 6 months
depending upon your usage. If the water flow to the water
dispenser or ice maker decreases noticeably before 6 months
have passed, replace the water filter cartridge more often.
• These contaminants are not necessarily in your water supply.
While testing was performed under standard laboratory
conditions, actual performance may vary.
• The product is for cold water use only.
• Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the
system. Systems certified for cyst reduction may be used on
disinfected waters that may contain filterable cysts.
• Refer to the back cover or "Accessories" section for the
Manufacturer's name, address and telephone number.
• Refer to the "Warranty" section for the Manufacturer's limited
warranty.
Application Guidelines,WVater Supply Parameters
Water Supply City or Well
Water Pressure 30 - 120 psi (207 - 827 kPa)
Water Temperature 33 ° - 100°F (0.6 ° - 37.8°C)
Service Flow Rate 0.5 gpm (1.9 L/min.) @ 60 psi.
*Class I particle size: >0.5 to <1 um
**Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.
*tFibers greater than 10 um in length
*Based on the use of Cryptosporidium parvum oocysts
@ NSF is a registered trademark of NSF International.
12
Loading ...
Loading ...
Loading ...