Loading ...
Loading ...
Loading ...
18 Morton
®
Water Softener Installation & Operation Manual
Programming the Water Softener (Model M34)
2. Press the
p
UP or
q
DOWN buttons to set ON or
OFF. When set to ON, the efficiency icon will be
displayed on the right hand side of the normal run
display.
3. Press the SELECT button three times, to return to
the normal run display (See Figure 37).
FIG. 35
FIG. 36
Efficiency Icon
FIG. 37
Displayed when efficiency
is set to “ON”
California Efficiency RequirementStep 5. Set Salt Efficiency
When this feature is ON, the water softener will oper-
ate at salt efficiencies of 4000 grains of hardness per
pound of salt or higher (May recharge more often
using smaller salt dosage but more regeneration
water). The softener is shipped with this feature set
OFF.
1. Press and hold
the SELECT button until one of the
screens in Figure 35 is displayed. Once in this dis-
play, press the SELECT button once and one of
the two displays in Figure 36 is shown.
Your Morton
®
Water Softener has a “High
Efficiency” feature with an ON or OFF setting.
This softener setting is shipped in the OFF posi-
tion, which utilizes the maximum rated capacity
while most often achieving maximum salt effi-
ciencies. When installing this unit in the State of
California, you MUST turn this setting to the ON
position, which may initiate more frequent
recharges. However it will operate at 4000
grains per pound of salt or higher.
If you wish to turn the Salt Efficiency feature ON
( icon will show in the display), follow the
instructions on this page.
Loading ...
Loading ...
Loading ...