Loading ...
Loading ...
Loading ...
5
Fig.3
Cleaning and user maintenance shall not be made by children.
CLEANING AND MAINTENANCE
Make sure to disconnect appliance from the power supply before cleaning
The Auto Clean function can clean the blender easily and rapidly in complete safety.
1. Pour a little warm soapy water into the jar and press down the Pulse button without
releasing it for a few seconds.
2. Dismantle all detachable parts
. Dissemble the jar from the motor unit and rinse it under
running water, then detach the blade assembly from the jar assembly, take the blade
assembly out, and remove the jar base seal ring (see fig.3). In addition, detach the
measure cup from the jar cover. Rinse the jar, blade, jar base, jar cover and measuring
cup under running water.
3. Wipe the outer surface of motor unit and with a damp cloth.
NOTE: Do not use abrasive cleanser and never immerse motor unit in water for
cleaning
4. Dry all parts and then assemble them. The method of assembling the blender attachment
is the opposite of its detaching sequence.
NOTE: If any problem has been encountered during use, never disassemble the
Motor Unit by yourself. There are no user serviceable parts inside. Only contact the
authorized service facility for examination and repair.
5. Wipe the outer surface of the jar with a damp cloth.
NOTE: Never immerse the motor unit into water for cleaning.
6.Warning: Blending at a maximum level load or hard fruits and vegetables make sure that
the speed selector is set at highest speed (10). If the speed used is too low, the motor will
be damaged due to insufficient torque. When the motor speed is too slow, you must
immediately use a higher speed setting to blend or turn the speed selector to “0FF” to
Loading ...
Loading ...
Loading ...