Loading ...
Loading ...
Loading ...
42
SETTING CHANNEL DELAY
This setting controls how many seconds the scanner waits after
a transmission ends before resuming scanning. If you select a
minus delay time, the scanner stops on the transmission for the
setting time, then automatically resumes scanning. (Default = 2
seconds)
1. To select a channel, press Hold then enter the channel
number.
2. Press Pgm/E to enter the Channel menu. (You can also
press Hold and scroll to the channel; press Func then
Pgm/E.)
3. Scroll to Set Delay and press Pgm/E.
4. Turn SCROLL CONTROL to select the delay time from the
following options:
• -10 sec - resumes after 10 seconds.
• -5 sec - resumes after 5 seconds.
• 0 sec - resumes immediately.
• 1 sec - waits 1 second for a reply then resumes.
• 2 sec - waits 2 seconds for a reply then resumes.
• 3 sec - waits 3 seconds for a reply then resumes.
• 4 sec - waits 4 seconds for a reply then resumes.
• 5 sec - waits 5 seconds for a reply then resumes.
5. Press Pgm/E to save and return to the Channel menu.
DELETING CHANNELS
You can delete all programming for a channel.
Loading ...
Loading ...
Loading ...