Loading ...
Loading ...
Loading ...
Maintenance
Maintenance Instructions
WARNING! Keep the grill away from combustible materials, gasoline, and other flammable vapors and liquids.
RECOMMENDATIONS
This grill should be thoroughly inspected and serviced annually by a qualified service person.
• Do not obstruct the flow of ventilation and combustion air.
• Keep the cylinder enclosure ventilation openings located on the side of the cart or enclosure and front and back of the
bottom shelf clear from debris.
COMBUSTION IN AIR ADJUSTMENT
IMPORTANT! This must be done by a qualified gas installer.
• The air shutter is factory set and should not require adjusting under
normal conditions. Adjustments might be required under extreme field
conditions.
• The flames of the air shutter will be dark blue, tipped with light blue
and occasionally yellow when adjusted correctly.
• Too little air flow to the burner will produce soot and lazy yellow flames.
• Too much air flow to the burner will cause flames to lift erratically and
cause igniting difficulties.
Adjusting the Air Shutter
1. Remove cooking grids and sear plates. Leave lid open.
2. You may have to open the cabinet door or remove the top drawer (if equipped) to access the air shutter screw located at the
mouth of the burner.
3. Remove the back cover to adjust rear tube burner air shutter.
4. Loosen air shutter lock screw and open or close air shutter as required. (Fig. 1)
5. Light the burners on high.
6. Visually inspect burner flames.
7. Turn burners off, tighten locking screws, and replace removed parts when shutters are set correctly.
8. Ensure insect screens are installed.
Burner Port
Yellow Tip
Dark Blue
Light Blue
FREESTYLE 425
Orifice
Sizes
Air
Shutter
Heat Input
Propane Propane
Main Tube Burner #64 0.500" 10.8 MJ/h
FREESTYLE 365
Orifice
Sizes
Air
Shutter
Heat Input
Propane Propane
Main Tube Burner #62 0.500" 12.4 MJ/h
Fig. 1
16
| Maintenance
Napoleon.com | Freestyle
®
Series Grills
Loading ...
Loading ...
Loading ...