Loading ...
Loading ...
Loading ...
6
Technical Data
Intended Use
The anglefinder is intended for measuring and transfer-
ring angles and for calculating simple and compound mi-
ter angles. It is suitable for indoor and outdoor use.
Features
The numbering of the product features shown refers to
the illustration of the anglefinder on the graphic page.
1 Fold-out leg
2 Viewing window for dis-
play
3 Locking knob
4 Base leg
5 Battery lid
6 Latch of battery lid
7 Display
8 Spirit level for horizon-
tal alignment
9 Spirit level for vertical
alignment
10 Serial number
11 “HOLD” button
12 “ON/OFF” button
13 Button for rotating the
display
14 “MTR1” button for sim-
ple miter
15 “MTR2” button for
compound miter
16 Protective pouch
17 Leg extension
Digital Anglefinder GAM 220 MF
Article number 3 601 K76 610
“HOLD” function ●
Display Illumination ●
“Simple Miter” Operating Mode ●
“Compound Miter” Operating
Mode
●
Measuring range 0°...220°
Measuring accuracy angle ±0.1°
Lowest indication unit 0.1°
Operating temperature 14 °F...122 °F / –10 °C...+50 °C
Storage temperature –4 °F...158 °F / –20 °C...+70 °C
Alkaline Batteries 4 x1.5V LR6 (AA)
Operating time approx. 80 h
Automatic switch-off after
approx.
30 min
Leg length 15.75in / 400 mm
Weight according to EPTA-
Procedure 01/2003
2.4 lbs / 1.1 kg
Dimensions
(length x width x height)
17.6 x 2 x 2.4 in /
447 x 52 x 60 mm
IP 54 (dust and splash proof) ●
The anglefinder can be clearly identified with the serial
number 10 on the type plate.
Display elements
The numbering of the product features shown refers to
the illustration of the anglefinder on the graphic page.
a “H” indicator for “HOLD” memory value
b Battery indicator
c Reading
d Bevel angle indicator “BVL”
e Miter angle indicator “MTR”
f Corner angle indicator “CNR”
g Spring angle indicator “SPR”
Loading ...
Loading ...
Loading ...