Kenmore 79095268990 electric range

User Manual - Page 5

For 79095268990.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Control Pad Functions
CLEAR PAD-- Used to
clear any function
previously entered
except the time of day
and minute timer. Push
CLEAR to stop cooking.
BAKE PAD Used to
enter the normal \
baking mode _ _'-
""B
temperature. \\_
BROIL PAD-- ,,_
Used to select__ _
the variable
broil function.
CLEAN PAD _
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For
satisfactory use of your oven, become familiar with the various functions of
the oven as described below.
UP and DOWN ARROW PADS-- Used along with the
function pads to select oven temperature, cooking
time, stop time (when programming an automatic
stop time), time of day, clean time and minute timer
CLOCK PAD-- Used
e of
day.
Used to select the OVEN, PREHEAT
self-cleaning & LOCK LIGHTS-- The "OVEN" light
cycle, will glow each time the oven unit turns on to maintain
the set oven temperature. The "PREHEAT" light will glow
when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven
temperature. The "LOCK" light will flash until the door
locks when the self-clean cycle is in use. It glows
constantly after the door locks.
LIGHTS-- These
light to show which
feature is in use.
BAKE TIME PAD--
Used to enter the
S S length of the
_baking time.
STOP TIME PAD--
Used to set the
desired stop time
for baking. Can be
TIMER PAD-- used with BAKE
Used to set or TIME to program a
cancel the minute delayed bake cycle.
timer. The minute
timer does not
start or stop
cooking.
The oven can be programmed to:
Bake normally
Time bake
Broil
Self-clean
r_
Z
r--
i
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be
programmed for silent operation. Push and hold _. After 7 seconds, the control will beep once. Thiswill block the
controls from sounding when a pad is pushed. To return the sound, push and hold [_J
again
for 7 seconds until 1
beep is heard.
Note: The control will return to the audible mode after a power outage.
Temperature conversion:
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push _. " -" appears in the display.
2. Push and hold the [_ until "HI" appears in the display.
3. Push and hold _ until °F or °C appears in the display.
4. Push the [_ or _ to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
5
Loading ...
Loading ...
Loading ...