Loading ...
Loading ...
Loading ...
Initial cleaning cycle.
3 Replace the Water Reservoir
Cap and turn clockwise to
close and lock.
4 Perform a Steam or
Blending Cycle by following
the steps explained in the
Using the Steam + Blend
section, page 18.
1 Turn the Water Reservoir
Cap counter-clockwise to
unlock and remove.
2 Fill the Water Reservoir to the
25-minute line with water.
Steam Auto
Blend Pulse
Remove cap and fill the water reservoir with cold water
Steam Auto
Blend Pulse
increased 125% +125 Turn the setting dial to select the steam setting
5 After the Steam or Blending
Cycle finishes, unplug the
appliance and let it cool
down completely.
6 Gently lift the Blending
Blade vertically out of the
center of the Work Bowl
using a mitt. Then, discard
any remaining water from
the Water Reservoir and
Work Bowl.
The nutribullet Baby
®
Steam + Blend is now
ready to use.
WARNING! The Blending
Blade is extremely hot and
sharp. Handle with care.
Steam Auto
Blend Pulse
1716
Loading ...
Loading ...
Loading ...