Loading ...
Loading ...
Loading ...
20
INSTALLATION
Connecting the Hose to the
Appliance
1
Screw the supply hose to the water inlet valve
on the back of the appliance.
NOTE
• Do not connect the hose to the hot water supply
for models with one water inlet. Connect to the
cold water supply only.
• After completing connection, if water leaks from
the hose, repeat the same steps. Use the most
conventional type of tap for the water supply. In
case that the tap is square or too big, remove the
guide plate before inserting the tap into the
adaptor.
• Make sure that the hose should not be kinked or
trapped.
Installing the Drain Hose
Connecting the Drain Hose to
the Dryer
1
Insert the hose clamp
a
onto the drain hose of
the dryer.
2
Connect the drain hose of the dryer and secure
the hose clamp.
3
Screw in the band to secure the drain hose of
the dryer onto the stacking bracket.
Loading ...
Loading ...
Loading ...