Loading ...
Loading ...
Loading ...
13
KEY COMBINATIONS:
To lock & unlock the keyboard
To enter programming mode
To return to the room temperature display
HOW TO SEE THE SET POINT:
1.
The set point parameter is the temperature at which the compressor cuts
out.
2.
Push and immediately release the SET key: the display will show the set
point value.
3.
Push and immediately release the SET key or wait for 5 seconds to display
the probe value again.
HOW TO CHANGE THE SET POINT:
1.
Push the SET key for more than 5 seconds to change the SET point value.
2.
The value of the set point will be displayed and the “C” or “F” LED starts
blinking.
3.
To change the Set value,’ push the or arrows within 10 seconds.
4.
To memorize the new set point value, push the SET key again or wait for 10
seconds.
HOW TO SEE THE MAXIMUM TEMPERATURE RECORDING
1.
Press and release the ▲ (UP) key.
2.
The “Hi” message will be displayed followed by the maximum temperature
recorded.
3.
By pressing the o key again or by waiting 5s the normal display will be
restored.
HOW TO SEE THE MINIMUM TEMPERATURE RECORDING
1.
Press and release the ▼ (DOWN) key.
2.
The “Hi” message will be displayed followed by the maximum temperature
recorded.
3.
By pressing the o key again or by waiting 5s the normal display will be
restored.
HOW TO RESET THE MAX AND MIN TEMPERATURE RECORDED
1.
Hold and press the SET key for more than 3s, while the max. or min
temperature is displayed. (rSt message will be displayed)
2.
To confirm the operation the “rSt” message starts blinking and the normal
temperature will be displayed
Loading ...
Loading ...
Loading ...