Loading ...
Loading ...
Loading ...
Aboutthefreshfoodcompartmentshelves.
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
Half-Width Shelves
One end of the shelf rests on a molded
side-wall support; a bracket on the other
end hooks into a track on the real"
cabinet w-all.
TOremove, lift the shelf up at front, then
off the support and out of the track.
TOreplace, select desired shelf height.
With shelf front raised slightly, hook the
bracket's top lug into the track, then
lower the shelf onto the support.
NOTE:Theshelfto therightof the trackis
designedtohookinto the@t-hand slot,
theshelf tothe left is designedtohook
intotheleftqTandslot.
Full-Width Shelves
Some models have a steel wire sliding
shelf, a stationary tempered glass shelf or
two steel wire stationary shelves. These
shelves can be moved to another place
in the fi'esh food compartment.
The full-width sliding shelf has stop-locks.
When placed correctly on the shelf
supports, the shelf will stop before coming
completely out of tbe refrigerator and will
not tilt when you place food on it or
remove food from it.
Toremovethefull-width shelves,lift the
rear of the shelf and pull forward.
Toremove a full-width sheff when the fresh
food compartment door cannot be opened
fully, lif_ tile rear of tile shelf, pull
forward and down, tilt the shelf and
take it out.
Spillproof Shelves (onsomemodels)
Spillproof shelves have special edges
to help prevent spills from dripping
to lower shelves. To remove or replace
the shelves, see the above instructions.
8
Loading ...
Loading ...
Loading ...