Loading ...
Loading ...
mtel-50 Instruction Manual
ASSEMBLY
Take the tripod out of the pouch and extend the legs (11).
Put the tripod holder (6) of the main tube (1) on to the tripod plat-
form (7) and tighten it together with the tripod securing screw (8),
make sure the tube is placed in the right direction as shown in the
Take the tripod out of the pouch and extend the legs (11).
Put the tripod holder (6) of the main tube (1) on to the tripod plat-
form (7) and tighten it together with the tripod securing screw (8),
make sure the tube is placed in the right direction as shown in the
diagram.
Place the diagonal prism (2) to the tube (use the chrome end) and
tighten with the holding screw (3). Place the eyepiece with the
lowest magnification (K-20) into the prism and tighten the screw
(5). Loosen the mount adjustment handle to adjust the direction
where you want to focus, then adjust the focus wheel (9) to get a
clear and sharp view.
MAGNIFICATION
Changing the eyepiece will change the power or magnification
(see the EYEPIECE CHART ON NEXT PAGE).
Focus re-adjustment may be required.
USE 2x BARLOW
Using the 2x Barlow will double the magnification or power.
The Barlow is placed between the telescope and the eyepiece.
Please note that the Barlow lens can not be used in
conjunction with the diagonal prism. (see diagram below)
2x BARLOW
Loading ...