Loading ...
Loading ...
Loading ...
3
STEP 4: Insert filter cartridge
into filter cup.
Support the bottom of the filter system with
one hand. Align the insert groove on the
lower part of the cartridge with the Filter
Replacement Indicator at the front of the
filter cup. Insert the filter cartridge into the
filter cup until a “click” is heard. Do not
force the filter cartridge into the system
base. Inserting the new filter cartridge
automatically resets and activates the
electronic Filter Replacement Indicator.
A green signal will flash, indicating that
the filter is engaged.
STEP 5: Flush the new filter cartridge with water.
Move the filter handle toward you to the filtered Brita® water setting:
Turn on the faucet to flush the new filter for 5 minutes to remove any carbon dust
and activate the filter. It is normal for carbon dust to appear. The 100 gallon/
378 liter filter life begins after the 5-minute conditioning period.
NOTE:
Use with cold water only. Do not run hot water (above 100°F/38°C) through the filter, as
it may damage the filter.
USE AND CARE OF FILTER
Your Brita® Faucet Filtration System is ready to use!
By adjusting the handle to the following positions, you can select the water you want:
Front View
FILTERED WATER
Move handle to forward position to…
Only draw filtered water from filter
port. All other water is unfiltered.
Filter Cartridge
Insert Groove
Filter Replacement
Indicator
Filter Cup
STREAM OF UNFILTERED WATER
Move handle to middle position to…
SPRAY OF UNFILTERED WATER
Move handle to rear position to…
Loading ...
Loading ...
Loading ...