Loading ...
Loading ...
Loading ...
UNDERMOUNT INSTALLATION
Please carefully read complete instructions before beginning installation.
Note: These instructions are for installation with solid surface, composite material countertops.
Ancona recommends professional countertop installers, customer is responsible for damage to
the countertop or sink during installation.
1. Unpack the new sink and check the contents of the materials supplied: sink, mounting brackets, and
cut-out template (depending on model).
2. Position cut-out sink template as desired and trace it on the countertop.
3. Locate and drill the clearance hole inside the cut-out line.
4. Cut the countertop opening by carefully following the line traced from the template according to the
countertop manufacturer’s instructions.
5. Drill faucet holes and install faucet according to manufacturer’s installation instruction.
6. Locate and drill the mounting holes (following the countertop manufacturer’s instructions) as shown below.
Holes should allow even spacing of mounting bracket around the sink.
7. Fasten mounting clip to countertop loosely.
Fastener
Screws
Countertop
Loading ...
Loading ...