Loading ...
Loading ...
Loading ...
1
Adjust the drip tray position. Place the cup with the correct
cup size on the drip tray. See "BEVERAGE EXAMPLES" or
package. Check ifthe water tank contains enough fresh
drinking water.
2
Open the locking handle. The machine switches on
automatically. The temperature selection button blinks
while the machine is heating up for approximately 40
seconds. Afterwards, the temperature selection button
lights steady red. The machine is ready to be used.
3
Make sure the rinsing tool is notinside. Insert the first
capsule in the capsule holder. Insert it back into the
machine. Close the locking handle.
4
Use the control ring to set the volume inaccordance with
the number of bars shown on the capsule or select the
desired volume to your owntaste. Choose XL beverage for
an extra bigcup. Wait around 1.5 min if you want to prepare
a second extra big cup.
5
Press the start/stop button. The beverage preparation
starts. Do not open the locking handle during the extraction.
Wait until the extractionstops. The machine stops the
preparationautomatically. The extractioncan be stoppedat
any time manually by pressing the start/stop button.
6
After finishing the preparation, the temperature selection
button and the volume display light blink for up to 8
seconds. During that time do not open the locking handle!
7
Open the locking handle. Pull out the capsule holder. Remove
the used capsule. Put the used capsule in the dustbin.
8
Insert the second capsule inthe capsule holder. Insert it
back into the machine. Close the locking handle.
9
Use the control ring to set the volume inaccordance with
the number of bars shown on the capsule or select the
desired volume to your owntaste.
13
7. PREPARINGABEVERAGE
7. 2 TWO CAPSULES (E. G. CAPPUCCINO)
Loading ...
Loading ...
Loading ...