Loading ...
Loading ...
Loading ...
8
6. Wall Mounting the Enclosure
C
Attach the enclosure cabinet body and front door to the
mounted back door by mounting the cabinet body and
securing it to the hinges and nuts removed in Step 1.
Note: Enclosure must be installed by a qualified technician.
Before mounting, use a level and tape measure to position your
mounting area precisely. Use appropriate fasteners (not
included) to secure the enclosure to the wall. A minimum of four
fasteners is recommended. A fender washer with close cell foam
is provided with the cabinet. The close cell foam side of the
washer should be against the cabinet to seal the mounting hole.
Use suitable mounting means when installing to cinder block,
concrete, drywall or wood studs. Warning: The supporting
surface must be able to safely support the combined load
of the equipment and all attached hardware and
components. For the actual weight, size and load capacity
of the enclosure, view the product specifications and other
support resources at tripplite.com/support.
C
16.00
406.40
22.03
559.47
Your model’s hole configuration
may be different.
B
Mount the enclosure's back
door by itself to wall studs.
The number of hole cutouts
on the back door of the
enclosure will vary based on
your model. Each hole can
accommodate an M8, M10,
5/16” or 3/8” bolt. The holes
are centered 16” apart
horizontally to accommodate
the standard placement of
wall studs. The vertical
distance between the holes
will vary based on your
model.
B
Loading ...
Loading ...
Loading ...