Loading ...
Loading ...
Loading ...
13
FINAL INSTALLATION
4. Remove one and loosen the other two light pan
screws (N) from the underside of the light pan (M).
Connect the 6-pin connector from the fan to the 6-pin
connector from the light kit (O). Align the key slot in
the light kit (O) with the loosened screws in the light
pan (M). Turn light kit (O) clockwise and replace the
previously removed light pan screw (N). Tighten all
screws.
5. Lift the glass bowl (P) into the light kit (O) and turn in a
clockwise direction until it is secure. CAUTION: Avoid
cross-threading the glass during installation. Improper
installation could cause the glass bowl (P) to be
di󰀩cult to remove or fall, which could cause serious
injury.
6. If desired, the mounting bracket in remote pack (R)
can be installed to a wall using the provided mounting
screws. The remote from remote pack (R) can be
stored in the mounting bracket for easy access.
Turn on power supply to the fan.
Assembly is complete.
4
5
O
6
P
O
N
M
6-Pin Connector
Mounting
Bracket
Mounting
Screw
Loading ...
Loading ...
Loading ...