Loading ...
Loading ...
Loading ...
13
The diagram on the right is an example of the LCD display.
a. (DX, DY) are the locked star’s offset to its original locked position.
b. (X0, Y0) are the position of the center of the image in sensor’s pixel matrix.
c. If NexGuide loses the guide star, it will wait until the star reappears.
Press ESC to return to Review Mode.
Autoguiding (Guiding Mode)
Once NexGuide is successfully locked onto a star, you may activate guiding with
the Guide Menu.
Activate Autoguiding
• AUTO CAL: Auto Calibration is recommended whenever the telescope has been moved to a new object. An
auto-calibration routine will detect the correct setting of the guiding parameters, including control signal polarity
parameters, as well as the guiding aggressiveness for the RA and Dec axes. NexGuide will automatically start
autoguiding after the calibration is complete.
• RESUME: This is to resume previous autoguiding. NexGuide will skip the auto-calibration routine and begin
autoguiding with the previous guiding parameters.
LOCK:
EXP 50
BRI 40
DX 5.32
DY 4.38
X0 120
Y0 35
OPERATING UNDER THE NIGHT SKY
Loading ...
Loading ...
Loading ...