Loading ...
Loading ...
Loading ...
Drainage
Continuous Drainage
Connect the drain pipe onto the back of the unit.
1. Place the unit on level flooring and unscrew the cap on the back of the unit.
2. Install the connector chip of the drain and gasket.
3. Install the drain pipe onto the connector chip.
4. Press the ON/OFF button to run the unit.
Note: If you do not require the function of the continuous drainage any longer, install
the cap on the drain hole on the back of the unit and the water will begin to flow back
into the tank.
Note: If you place the unit on un-even flooring or do not correctly install the drain pipe,
the water will fill the tank and the drainage will not work. Ensure to check the grounsd
is level and the pipe and tank are correctly installed as below.
19
Loading ...
Loading ...
Loading ...