#1 How to fill the salt reservoir?
The salt reservoir is located in the lower part of the dishwasher(under the lower rack on the left side). Once your water softener system is turned on, you must fill the reservoir with dishwasher softener salt and water. As the salt supply is used up with successive system regenerations, a low-salt indicator will light onthe control panel indicating it’s time to refill the salt. Once salt isrefilled, the light will turn off.
1. Remove the lower rack and unscrew the reservoir cap (byturning the cap counter-clockwise).
2. Position a funnel (comes along with your dishwasher) and fillthe salt reservoir right up to its edge (approximately 0.5 kg); itis not unusual for a little water to leak out.
3. If filling the reservoir for the first time, it is also necessary to fillthe reservoir with water after filling with salt. When refilling salt, there is no need to add more water.
4. Remove the funnel and wipe any salt residue away from theopening. Make sure the cap is screwed on tightly so that nodetergent or food can get into the reservoir during the dishwasher use (this could damage the water softener beyondrepair).
