Loading ...
Loading ...
Loading ...
11
As the desired time setting approaches,
release the button and then press repeatedly
to advance one digit at a time.
The Automatic Shutoff Time (ASO) may be
programmed either before or during coffee
brewing. You may also re-program the ASO
time when brewing has been completed. If
you do so, the Grind & Brew
™
will automati-
cally account for any time that has already
elapsed after brewing. For example, if you set
the ASO for 40 minutes and 25 minutes have
already elapsed, the Grind & Brew
™
will shut
off automatically after 15 minutes (40 minutes
minus the 25 elapsed equals 15 minutes).
Turning off Grind Function
To turn off the grinding function, press the
Grind Off button. An amber LED will be
illuminated. Then press the On button.
CHANGING THE
WATER FILTER
a. Remove the filter from polybag
and soak in cold tap water for
15 minutes.
b. Remove the water filter holder from
the coffeemaker by lifting it out of
the reservoir area with your thumb
and forefinger.
c. Grasp stem in one hand. Using thumb
of other hand, gently press down and
pull toward you. Compartment will ip
open.
d. Place the lter in the holder and close
the water lter holder; you will hear a
snap indicating it is in place.
NOTE: Caution must be used when insert-
ing the charcoal filter. Improper placement
in the holder can cause tearing of the filter
skin.
e. Hold the lter under cold running tap
water for 10 seconds to ush. You
should place the hole openings in the
side of the unit directly under the water
stream.
f. Allow the lter to drain completely.
g. Replace the water lter holder in the
reservoir area of the coffeemaker, push-
ing it all the way down to the base of
the unit, along the reservoir wall.
Note: We recommend changing the water
lter every 60 days or 60 uses, more often
if you have hard water. Replacement water
lters can be purchased in stores or by
calling customer service or through the Cui-
sinart web site.
MAKING COFFEE
Before you make the first pot of cof-
fee in your new Cuisinart
®
Grind &
Brew
™
Automatic coffeemaker, we recom-
mend operating the coffeemaker once,
using only water and a paper filter. This will
remove any dust or residues which remain in
the system from the manufacturing process.
1. Fill the Water Reservoir
Open the reservoir lid by pushing the release
button and lifting up. Pour the desired
amount of water in the reservoir using the
step water indicator located at the rear of
the reservoir.
2. Add Beans
Lift the grinder basket lid, using the recess
on either side. Fill the basket with the
desired quantity of beans.
Use 1 level scoop of whole beans per cup.
For 1 to 4 cups, use 1½ level scoops per
cup. Maximum capacity for whole beans
is 14 level scoops. Do not overfill or the
Loading ...
Loading ...
Loading ...