Operating instructions
Refrigerator
It is essential to read these operating and installation instructions
before installing and using the appliance. This prevents both personal
injury and damage to the appliance.
en - AU, NZ M.-Nr. 12 124 620
Contents
2
Warning and Safety instructions...................................................................... 5
Caring for the environment .............................................................................. 15
Installation.......................................................................................................... 16
Installation location ............................................................................................. 16
Climate range ................................................................................................. 17
Ventilation requirements...................................................................................... 17
Installing multiple refrigeration appliances .......................................................... 18
Side-by-side installation................................................................................. 18
Changing the door hinging.................................................................................. 18
Fitting the supplied wall spacers......................................................................... 19
Installation ........................................................................................................... 19
Aligning the appliance .................................................................................... 20
Integrating the refrigeration appliance in a run of kitchen units .......................... 21
Appliance dimensions ......................................................................................... 23
Electrical connection ........................................................................................... 26
Saving energy .................................................................................................... 27
Guide to the appliance...................................................................................... 28
Appliance overview ............................................................................................. 28
Control panel with start display........................................................................... 30
Settings mode ........................................................................................... 30
Selecting the desired function in Settings mode....................................... 32
Adjusting the interior fittings................................................................................ 33
Moving the door/bottle shelf .......................................................................... 33
Clipping the egg trays on ............................................................................... 33
Adjusting or removing the bottle holder......................................................... 33
Moving the adjustable shelves ....................................................................... 33
Space for a baking tray .................................................................................. 34
Moving the charcoal filters ............................................................................. 34
Accessories supplied .......................................................................................... 35
Optional accessories........................................................................................... 35
Switching on and off ......................................................................................... 36
Before using for the first time.............................................................................. 36
Connecting the appliance .............................................................................. 36
Switching on the appliance ................................................................................. 36
Switching off the appliance................................................................................. 36
Switching off for longer periods of time ......................................................... 37
The correct temperature................................................................................... 38
Temperature display ............................................................................................ 39
Contents
3
Setting the temperature....................................................................................... 39
Possible temperature settings ............................................................................. 39
Using SuperCool and DynaCool ...................................................................... 40
Switching DynaCool on and off................................................................. 41
Selecting further settings ................................................................................. 42
Explanation of the different settings.................................................................... 42
Party mode ................................................................................................. 42
Holiday mode............................................................................................ 42
Switching the lock function/ on............................................................. 43
Sabbath mode ............................................................................................ 44
Information on Sabbath mode .................................................................... 44
Changing the time before the door alarm is triggered ............................... 44
Changing the volume of the alarms and buzzers/ .............................. 45
Adjusting the display brightness ............................................................... 46
Switching off Demo mode........................................................................... 46
Resetting the settings to their factory default settings............................. 46
Information .................................................................................................. 46
Charcoal filter change indicator................................................................. 46
Cleaning mode ......................................................................................... 47
Door alarm ......................................................................................................... 48
Storing food in the refrigerator section........................................................... 49
Different storage zones ....................................................................................... 49
Food which is not suitable for storage in the refrigerator.................................... 50
Notes on buying food.......................................................................................... 50
Storing food correctly.......................................................................................... 51
Storing food in the DailyFresh drawer............................................................. 52
Defrosting........................................................................................................... 54
Cleaning and care ............................................................................................. 55
Cleaning agents................................................................................................... 55
Preparing the refrigeration appliance for cleaning .............................................. 56
Cleaning the interior of the machine ................................................................... 56
Cleaning accessories by hand or in the dishwasher........................................... 57
Removing and dismantling accessories for cleaning.......................................... 57
Cleaning the front of the appliance and the side panels..................................... 60
Cleaning the door seal ........................................................................................ 60
Cleaning the ventilation gaps .............................................................................. 60
After cleaning ...................................................................................................... 61
Contents
4
Problem solving guide ...................................................................................... 62
Noises................................................................................................................. 69
Service................................................................................................................ 70
Contact in case of fault ....................................................................................... 70
Warranty .............................................................................................................. 70
Warning and Safety instructions
5
This refrigeration appliance complies with current local and
national safety requirements. However, inappropriate use can lead
to personal injury and damage to property.
Please read the operating and installation instructions carefully
before using the refrigeration appliance for the first time. They
contain important information on safety, installation, use and
maintenance of the appliance. This is to protect yourself from
injury and from damaging your refrigeration appliance.
In accordance with standard IEC60335-1, Miele expressly and
strongly advises that you read and follow all information provided
concerning the installation of the refrigeration appliance, as well as
safety notes and warnings.
Miele cannot be held liable for injury or damage caused by non-
compliance with these instructions.
Keep these instructions in a safe place and pass them on to any
future owner.
Correct application
This appliance is designed for domestic use and for use in similar
environments by guests in hotel or motel rooms, bed & breakfasts
and other typical living quarters. This does not include common/
shared facilities or commercial facilities within hotels, motels or bed
& breakfasts.
This appliance is not suitable for outdoor use.
This appliance is intended for domestic use only for the cooling
and storing of food and drinks.
Any other usage is not permitted.
Warning and Safety instructions
6
This appliance is not suitable for storing and keeping cool
medicines, blood plasma, laboratory preparations or similar
substances or products. Incorrect use of the appliance for such
purposes may cause deterioration of the items stored.
The appliance is also not suitable for use in areas where there is a
risk of explosion.
Miele cannot be held liable for damage resulting from incorrect or
improper use or operation of the appliance.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities or
lack of experience and knowledge, unless they have been given
supervision and instruction concerning its use by a person
responsible for their safety.
They may only use the appliance unsupervised if its operation has
been clearly explained to them and they are able to use it safely and
are able to understand and recognise the possible dangers caused
by incorrect operation.
Safety with children
Young children must not be allowed to use this appliance.
Older children may only use the appliance when its operation has
been clearly explained to them and they are able to use it safely,
recognising the dangers of misuse.
Cleaning work may only be carried out by older children under the
supervision of an adult.
Please supervise children in the vicinity of the appliance and do
not let them play with it.
Danger of suffocation! Children may be able to wrap themselves in
packing material (e.g. foil) or pull it over their head with the risk of
suffocation. Keep packaging material away from children.
Warning and Safety instructions
7
Technical safety
The refrigerant circuit has been checked for leaks. The
refrigeration appliance complies with all current local and national
safety requirements.
Warning: Risk of fire / Flammable materials.
This refrigeration appliance contains the refrigerant Isobutane
(R600a), a natural gas which is environmentally friendly. Although it is
flammable, it does not damage the ozone layer and has a lower
greenhouse effect than some other refrigerants.
The use of this refrigerant has, however, led to a slight increase in
the noise level of the appliance. In addition to the noise of the
compressor, you might be able to hear the refrigerant flowing around
the system. Unfortunately, these effects cannot be avoided, but they
do not not affect the performance of the refrigeration appliance.
When transporting and installing the refrigeration appliance, ensure
that no parts of the cooling circuit are damaged. Splashes of
refrigerant can damage the eyes.
In the event of any damage:
- Avoid naked flames or anything which creates a spark.
- Disconnect the refrigeration appliance from the mains electricity
supply.
- Ventilate the room in which the appliance is located for several
minutes.
- Call Miele.
Warning and Safety instructions
8
The more refrigerant there is in a refrigeration appliance, the larger
the room should be in which it is installed. In the event of a leakage,
if the appliance is in a small room, there is the danger of a
combustible gas/air mixture building up. For every 8g of refrigerant,
at least 1m
3
of room space is required. The amount of refrigerant in
the refrigeration appliance is stated on the data plate inside the
appliance.
To avoid the risk of damage to the appliance, make sure that the
connection data (fuse rating, frequency and voltage) on the data
plate corresponds to the household supply. Check that this is the
case before connecting the appliance.
Consult a qualified electrician if in any doubt.
The electrical safety of this appliance can only be guaranteed
when correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.
Temporary or permanent operation with a self-sufficient or non-
mains synchronous energy supply system (e.g. isolated networks,
back-up systems) is possible. A requirement for the operation is that
the energy supply system complies with all current local and national
requirements that apply to stand-alone, solar and/or battery
systems.
The protective measures provided in the installation and in this Miele
product must also be assured in their function and operation in
isolated operation or in non-mains synchronous operation, or
replaced with equivalent measures in the installation.
If the electrical connection cable supplied is damaged, it must
only be replaced by an original spare part to prevent a hazard for the
user. Miele can only guarantee the safety of the appliance when
original Miele spare parts are used.
Do not connect the appliance to the mains electricity supply by a
multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).
Warning and Safety instructions
9
If moisture gets into electrical components or into the mains
connection cable, it could cause a short circuit. Therefore, do not
operate this refrigeration appliance in areas which are exposed to
moisture (e.g in a garage or laundry).
This appliance must not be installed and operated in mobile
installations (e.g. on a ship).
Do not use a damaged appliance. It could be dangerous. Check
the appliance for visible signs of damage.
This refrigeration appliance is not intended for use as a built-in
appliance.
During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:
- the mains circuit breaker has been switched off, or
- the screw-out fuse is removed (in countries where this is
applicable), or
- it is switched off at the wall socket and the plug is withdrawn from
the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.
Repairs and other work by unqualified persons could be
dangerous. Maintenance work and repairs to electrical appliances
must only be carried out by a Miele authorised technician.
The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele authorised technician.
Faulty components must only be replaced with genuine Miele
original spare parts. Miele can only guarantee the safety standards of
the appliance when Miele spare parts are used.
Warning and Safety instructions
10
This refrigeration appliance is supplied with a special lamp to
cope with particular conditions (e.g., temperature, moisture,
chemical resistance, abrasion resistance and vibration). This lamp
must only be used for the purpose for which it is intended. The lamp
is not suitable for room lighting. Replacement lamps may only be
replaced by a Miele authorised technician. This refrigeration
appliance contains several light sources with at least energy
efficiency classF.
In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the appliance and
its surroundings clean at all times. Any damage caused by
cockroaches or other vermin will not be covered by the warranty.
Correct installation
When installing the refrigeration appliance, it is a mandatory
requirement to follow the installation instructions supplied with it.
Change the door hinging (if necessary) as described in the
installation instructions supplied with the appliance.
Refrigeration appliances with an “S” in the model identifier can be
installed next to each other as a side-by-side combination:
- Carry out installation as described in the installation instructions
supplied with the appliance.
- Do not change the door hinging as the arrangement of the
refrigeration appliances is predefined.
Two people are required to install the refrigeration appliance.
Warning and Safety instructions
11
Correct use
This refrigeration appliance is designed for use within specific
ambient temperatures (climate range). Do not use it in ambient
temperatures for which it is not designed. The climate class is stated
on the data plate inside the refrigeration appliance. A lower ambient
temperature will cause the compressor to switch off for longer
periods, meaning that the refrigeration appliance is unable to
maintain the required temperature.
To ensure proper air flow in and out of the appliance, the
ventilation gaps in the appliance and built-in structure must not be
covered or blocked in any way. This would also increase the energy
consumption and could cause damage to the appliance.
If storing food which contains a lot of fat or oil in the appliance or
the appliance door, make sure that it does not come into contact
with plastic components as this could cause stress cracks or break
the plastic. Make sure that no fat or oil leaks onto the plastic parts of
the appliance.
Risk of fire and explosion! Do not store any explosive materials or
products containing flammable propellants (e.g. spray cans) in the
refrigeration appliance. Electrical components can cause flammable
mixes of gases to ignite.
Danger of explosion! Do not operate any electrical equipment (e.g.
an electric ice cream maker) inside the appliance. Danger of
sparking and explosion.
Food stored for too long may present a risk of food poisoning.
Storage times will depend on several factors, including the freshness
and quality of the food, as well as the temperature at which it is
stored. Follow the instructions given on the food manufacturer's
packaging regarding storage conditions and use-by dates.
Warning and Safety instructions
12
Stainless steel appliances
The coated stainless steel surface can be damaged by adhesives
and will lose its dirt-repelling properties. Do not adhere sticky notes,
transparent tape, masking tape or other adhesives onto the stainless
steel surface.
The surface is susceptible to scratching. Even magnets can cause
scratches.
Accessories and spare parts
Only use original Miele accessories. Using spare parts or
accessories from other manufacturers will invalidate the warranty,
and Miele cannot accept liability.
Miele will guarantee to supply functional spare parts for a
minimum of 10years and up to 15years following the
discontinuation of your refrigeration appliance.
Cleaning and care
Do not use any oils or grease on the door seals, as these will
cause the seals to deteriorate and become porous with time.
Do not use a steam cleaning appliance to clean this appliance.
Steam could reach the electrical components and cause a short
circuit.
Sharp edged or pointed objects will damage the evaporator,
causing irreversible damage to the appliance. Do not use sharp
edged or pointed objects to
- remove frost and ice, or accelerate the defrosting process,
- separate frozen foods and remove ice trays.
Never place electric heaters or candles in the appliance to defrost
it. These can damage the plastic parts.
Warning and Safety instructions
13
Do not use defrosting sprays or de-icers, as they might contain
substances which could damage the plastic parts or which could
cause a build-up of gases and pose a danger to health.
Transport
To avoid damage to the appliance, always transport it upright and
in its packaging.
Risk of injury and damage! The refrigeration appliance is very
heavy and must be transported by two people.
Disposal of your old appliance
Children playing could become trapped in the refrigeration
appliance and could suffocate.
- Remove the appliance door(s).
- Remove the drawers.
- Leave the adjustable shelves in the refrigeration appliance so
children cannot climb inside.
- If your old refrigeration appliance has a door lock, destroy it. This
way you will prevent the risk of playing children accidentally
locking themselves in and endangering their lives.
Risk of electric shock!
- Cut the power plug off the mains connection cable.
- Cut the mains connection cable off the old appliance.
Dispose of everything separately from the old appliance.
During and after disposal, make sure that the refrigeration
appliance is not placed near petrol or other flammable gases and
liquids.
Warning and Safety instructions
14
Risk of fire due to escaping oil or refrigerant!
The refrigerant and oil inside the appliance are flammable. In high
enough concentrations, escaping refrigerant or oil may ignite if they
come into contact with an external heat source.
During disposal, make sure that the cooling circuit is not damaged in
order to prevent refrigerant and oil escaping in an uncontrolled
manner (see the data plate for details of the refrigerant).
Splashes of coolant can damage the eyes. Be careful not to
damage any part of the pipework whilst awaiting disposal, e.g. by
- puncturing the refrigerant channels in the condenser,
- bending any pipework, or
- scratching the surface coating.
Symbol on the compressor (depending on model)
This information is only relevant for recycling. There is no risk during normal
operation.
The oil in the compressor can be fatal if swallowed or if it
penetrates the airways.
Caring for the environment
15
Disposal of the packing
material
The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and can normally be recycled.
Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites. Ensure that any plastic
wrappings, bags etc. are disposed of
safely and kept out of the reach of
babies and young children. Danger of
suffocation!
Disposing of your old
appliance
Electrical and electronic appliances
contain many valuable materials. They
also contain certain materials,
compounds, and components which
were essential for their correct
functioning and safety. These could be
hazardous to human health and to the
environment if disposed of with general
waste or if handled incorrectly. Please
do not, therefore, dispose of your old
appliance with your household waste.
Take care not to damage your
refrigeration appliance before or during
disposal in an authorised,
environmentally friendly manner.
This is to ensure that refrigerant in the
cooling circuit and oil in the compressor
is contained, and will not leak into the
environment.
Please dispose of it at your local
community waste collection/recycling
centre for electrical and electronic
appliances, or contact Miele. You are
also responsible for deleting any
personal data that may be stored on the
appliance prior to disposal. You should
remove any old batteries which are not
securely enclosed by the appliance and
remove any lamps without destroying
them, where this is possible. These
must be taken to a suitable collection
point where they can be handed in free
of charge. Please ensure that your old
appliance presents no danger to
children while being stored awaiting
disposal.
Installation
*INSTALLATION*
16
Installation location
Risk of damage due to high
humidity.
In environments with high humidity,
condensation can build up on
external refrigeration appliance
panels.
This condensate can cause corrosion
on external appliance panels.
Install the refrigeration appliance in a
dry and/or air-conditioned room with
sufficient ventilation.
After installation, please make sure
that the appliance door(s) closes/
close properly and that the specified
ventilation gaps are adhered to.
Fire hazard and risk of damage
from appliances that give off heat.
Appliances that give off heat can
catch fire and set fire to the
refrigeration appliance.
Do not place appliances which give
off heat, such as mini-ovens, double
burner cooktops or toasters on the
refrigeration appliance.
Fire risk and danger of damage
from open flames!
Open flames can set fire to the
refrigeration appliance.
Keep open flames (e.g. a candle)
away from the refrigeration
appliance.
This appliance should be installed in a
dry, well-ventilated room.
When deciding on the installation site,
please bear in mind that your
refrigeration appliance will use more
energy if installed near to a heater, a
cooker or other appliance that gives
off heat.
Avoid direct sunlight.
The higher the ambient temperature,
the longer the compressor runs and
the higher the energy consumption is.
When installing the refrigeration
appliance, please note the following:
- The mains socket must not be
located directly behind the appliance
and should be easily accessible.
- The plug and mains connection cable
must not touch the rear of the
refrigeration appliance as they could
be damaged by vibrations from the
appliance.
- Other appliances must also not be
plugged into a socket located directly
behind this appliance.
- WARNING: When positioning the
appliance, ensure the mains
connection cable is not trapped or
damaged.
- WARNING: Do not locate multiple
portable socket-outlets or portable
power supplies at the rear of the
appliance.
- The floor at the installation site must
be horizontal and level and must be
as high as the surrounding floor.
Installation
*INSTALLATION*
17
Climate range
This refrigeration appliance is designed
for use within specific ambient
temperatures (climate range). Do not
use it in ambient temperatures for which
it is not designed. The climate class is
stated on the data plate inside the
refrigeration appliance.
Climate range Ambient
temperature
SN +10 to +32°C
N +16 to +32°C
ST +16 to +38°C
T +16 to +43°C
A lower ambient temperature leads to
the compressor switching off for longer
periods. This can cause the internal
temperature in the appliance to rise with
the risk of food deteriorating and going
off.
Ventilation requirements
Risk of fire and damage due to
insufficient ventilation!
If the appliance is not ventilated
sufficiently, the compressor will run
more frequently and for longer
periods. This will result in increased
energy consumption and a higher
operating temperature of the
compressor. This, in turn, can result
in damage to the compressor.
Please ensure that there is adequate
ventilation around the appliance.
It is essential to observe the required
ventilation gaps.
The ventilation gaps must not be
covered or blocked in any way.
They must also be cleaned on a
regular basis to remove dust.
Air at the back of the refrigeration
appliance gets warm. Sufficient space
for proper ventilation must therefore be
ensured (see “Installation dimensions”).
Installation
*INSTALLATION*
18
Installing multiple refrigeration
appliances
Risk of damage due to
condensation on the external
appliance panels.
In environments with high humidity,
condensation can build up between
the external refrigeration appliance
panels, which can cause corrosion.
Do not place different refrigeration
appliances directly next to one
another.
A distance of at least 70mm must be
maintained between the refrigeration
appliances.
Side-by-side installation
Your refrigerator can be installed to the
right of another freezer as it is equipped
with an integrated heater in the left-
hand side panel (see “Appliance
dimensions”).
The freezer must also be equipped with
an integrated heater in the right-hand
side panel.
Depending on the model, the
appropriate side-by-side installation kit
will be provided with the freezer. The
accompanying installation instructions
describe how to install the refrigeration
appliances next to each other.
Useful tip: Please contact Miele for
information on which combinations are
suitable for your appliance.
Changing the door hinging
Please note that the hinging must not
be changed if this appliance is going
to be installed side by side with
another refrigeration appliance.
Danger of injury and damage
when changing the door hinging!
There is an increased danger of
injury and damage if the door hinging
is installed by a single person.
Always change the door hinging with
the help of a second person.
The appliance is supplied with right-
hand hinging. If left-hand hinging is
required, the hinges must be changed.
Installation
*INSTALLATION*
19
Fitting the supplied wall
spacers
The wall spacers supplied must be
used in order to achieve declared
energy consumption values and to
prevent the build-up of condensation
at high ambient temperatures. The
refrigeration appliance depth is
increased by approx.15mm for
appliances with wall spacers fitted.
If the wall spacers are not used, the
functionality of the refrigeration
appliance is not affected. However,
energy consumption is slightly
increased with less distance between
the appliance and the wall.
Fit the wall spacers onto the back of
the refrigeration appliance on the
bottom left and right.
Installation
Risk of injury and damage due to
the refrigeration appliance tipping
over.
There is an increased risk of injury
and damage if the refrigeration
appliance is installed by a single
person.
Two people are required for installing
the refrigeration appliance.
Risk of damage to the appliance
door caused by impact.
The appliance door could hit the wall
of the room resulting in damage to
the door.
Protect the appliance door by fitting
a felt stopper, for example, to the
wall of the room.
Risk of damaging the floor.
Moving the refrigeration appliance
can cause damage to the floor.
Move the appliance carefully on
floors that are sensitive to
scratching.
For easier installation, there are
transport handles on the back at the
top and transport wheels underneath
the refrigeration appliance.
Useful tip: The appliance must be
empty when it is installed.
Prepare the appliance for installation
as close as possible to its intended
installation location.
Connect the appliance to the
electricity supply as described in
"Electrical connection".
Installation
*INSTALLATION*
20
Move the appliance carefully to its
intended installation location.
Position the refrigeration appliance
with the wall spacers (if fitted) or the
back of the appliance close to the
wall.
Aligning the appliance
Risk of damage and danger of
injury due to the appliance door
swinging open or the refrigeration
appliance tipping over.
If the additional adjustable foot on
the hinge plate at the bottom is not
resting firmly on the floor, the
appliance door may swing open or
the refrigeration appliance can tip
over.
Use the open spanner supplied with
the appliance to unscrew the
adjustable foot until it is resting on
the floor.
Then unscrew it by a further quarter
turn.
Use a spirit level and the open
spanner supplied to align the
refrigeration appliance and support
the appliance door.
1. Adjust the front adjustable feet.
2. Unscrew the additional adjustable
foot until it is touching the floor. Then
unscrew it by a further quarter turn.
Installation
*INSTALLATION*
21
Integrating the refrigeration
appliance in a run of kitchen
units
The refrigeration appliance can be
surrounded by kitchen units.
KS/FNS/KFN4xxxX edt/cs
Top box
Refrigeration appliance, door depth =
75mm
Kitchen unit
Wall
A = 25mm (with recessed grip)/60mm (with
handle)
* The appliance depth is increased by
approx. 15mm for appliances with
wall spacers fitted.
Risk of fire and damage due to
insufficient ventilation!
If the appliance is not ventilated
sufficiently, the compressor will run
more frequently and for longer
periods. This will result in increased
energy consumption and a higher
operating temperature of the
compressor. This, in turn, can result
in damage to the compressor.
Please ensure that there is adequate
ventilation around the appliance.
It is essential to observe the required
ventilation gaps.
The ventilation gaps must not be
covered or blocked in any way.
They must also be cleaned on a
regular basis to remove dust.
The larger the ventilation gap, the
more economically the compressor
will work.
Installation
*INSTALLATION*
22
Install the refrigeration appliance next
to the kitchen unit.
- The appliance front must protrude in
front of furniture fronts by at least the
door depth. This enables the doors to
be opened and shut without being
obstructed.
- When installed next to a wall, a
distance (A) must be maintained on
the hinge side between the wall
and the refrigeration appliance.
- To match the height of the rest of the
kitchen units, the refrigeration
appliance can be fitted with a
suitable top box.
A ventilation duct of at least 50mm
depth must be provided across the
whole width of the top box.
The ventilation gap under the ceiling
must be at least 300cm
2
to ensure
that the warm air can escape
unhindered.
Installation
*INSTALLATION*
23
Appliance dimensions
Installation dimensions/View from above
KS 4383 edt/cs
All dimensions are given in mm.
The refrigeration appliance will function correctly if the specified ventilation cross-
sections are kept clear.
* Dimensions without wall spacers fitted. Appliance depth is increased by 15mm with the
wall spacers supplied fitted.
A B
KS4383EDedt/cs 1850 1061
Installation
*INSTALLATION*
24
Connections
KS 4383 edt/cs
All dimensions are given in mm.
a
Front view
b
Mains connection cable, length = 2,000 mm
A longer mains connection cable is available from Miele.
Installation
*INSTALLATION*
25
Installation dimensions/View from above
FNS 4382 E edt/cs + KS 4383 edt/cs
For more information, see “Installing multiple refrigeration appliances – Side-by-
side installation” and the installation instructions supplied with the side-by-side
installation kit.
All dimensions are given in mm.
The refrigeration appliances will function correctly if the specified ventilation
cross-sections are kept clear.
* Dimensions without wall spacers fitted. Appliance depth is increased by 15mm with the
wall spacers supplied fitted.
A B C D E
FNS4382E + KS4383ED 675 1260 1732 1178 1218
Installation
*INSTALLATION*
26
Electrical connection
The refrigeration appliance must only be
connected to an earthed socket using
the connection cable supplied.
The socket should be easily accessible
after the refrigeration appliance has
been installed. If the socket is not easily
accessible, ensure that a suitable
means of disconnection is provided on
the installation side for each pole.
Risk of fire from overheating.
Connecting the appliance to a multi-
socket plug adapter or to an
extension lead can overload the
cable.
For safety reasons, do not use an
extension cable or multi-socket
adapter.
All electrical work must be carried out
by a suitably qualified and competent
person in strict accordance with
national and local safety regulations.
For safety reasons, we recommend
using a suitable residual current device
(RCD) in the relevant electrical
installation for connecting the
refrigeration appliance.
If the mains connection cable is
damaged, it must only be replaced with
a specific mains connection cable of
the same type (available from Miele).
The data plate indicates the nominal
power consumption and the connection
data. Compare this information with the
data of the on-site electrical
connection. If in any doubt, consult a
qualified electrician.
Temporary or permanent operation with
a self-sufficient or non-mains
synchronous energy supply system
(e.g. isolated networks, back-up
systems) is possible. A requirement for
the operation is that the energy supply
system complies with all current local
and national requirements that apply to
stand-alone, solar and/or battery
systems.
The protective measures provided in
the domestic installation and in this
Miele product must also be assured in
their function and operation in isolated
operation or in non-mains synchronous
operation, or replaced with equivalent
measures in the installation.
Connecting the appliance
Back of the refrigeration appliance
Appliance plug connector
Mains plug
Plug the appliance plug connector
into the appliance socket.
Make sure that the plug connector has
locked into position correctly.
Insert the mains plug of the appliance
into the socket and switch it on.
The appliance is now connected to the
electricity supply.
Saving energy
27
How to save energy:
Installation
location
The refrigeration appliance has to cool more often at higher
ambient temperatures and consumes more energy in the
process. Therefore, you should:
- Install the refrigeration appliance in a well-ventilated room.
- Do not install the refrigeration appliance near to a heat source
(heater element, cooker).
- Protect the refrigeration appliance from direct sunlight.
- Ensure an ideal ambient temperature of 20°C.
- Clean the ventilation gaps on a regular basis to remove any
dust.
Temperature
setting
The colder the temperature, the higher the energy consumption.
The following settings are recommended:
- 4 to 5°C in the refrigerator section.
Use Energy consumption is increased by heat input and impeded air
circulation. Therefore, you should:
- Only open the appliance door(s) when necessary and for as
short a time as possible. Arrange the food in such a way that
makes it easy to find in the appliance.
- Always close the appliance door(s) properly after opening
them.
- Allow hot food and drinks to cool down before placing them in
the refrigeration appliance.
- Store food well packaged or covered.
- Do not overfill the compartments to allow air to circulate.
- Place frozen food in the refrigerator section to defrost.
- Keep drawers and shelves arranged as they were when the
appliance was delivered.
Guide to the appliance
28
Appliance overview
Picture shows an example of an appliance model.
Guide to the appliance
29
a
Display
b
Interior lighting
c
Fan
d
Door shelves
e
Adjustable shelf
f
Egg tray
g
Bottle shelf with bottle holder
h
Space for a baking tray (XL interior)
i
Compartment cover for setting the humidity level in the DailyFresh drawer
j
Condensate channel and drain hole
k
DailyFresh drawer for fruit and vegetables (humidity-controlled)
l
Ventilation gap
Guide to the appliance
30
Control panel with start display
5
°C
OK
<
>
1
2
4
3
a
Temperature display for the refrigerator section
b
Sensors for selecting a setting
c
OKsensor for confirming a selection
d
Display for Miele@home connection status
(depending on model)
(only visible when the Miele@home function has been set up)
Settings mode
In Settings mode, you can select the following appliance functions and alter their
settings to some extent:
Symbol Function Factory
default
setting
Switching the Party mode function on or off
(see “Selecting further settings”)
Off
Switching the Holiday mode function on or off
(see “Selecting further settings”)
Off
/ Switching the system lock on or off
(see “Selecting further settings”)
(Off)
Switching off the refrigeration appliance ––
Switching the Sabbath mode function on or off
(see “Selecting further settings”)
Off
Guide to the appliance
31
Calling up information on the Sabbath mode function
(see “Selecting further settings”)
––
Changing the time before the door alarm is triggered
(see “Selecting further settings”)
1:00
/
Switching the keypad tone on or off On
/ Changing the volume of the alarms and buzzers or
switching them off entirely
(see “Selecting further settings”)
On
/Level5
Changing the display brightness
(see “Selecting further settings”)
Level4
°C/°F Changing the temperature unit
(°Celsius or °Fahrenheit)
°C
Switching the Demo mode function off
(only visible when switched on)
(see “Selecting further settings”)
Off
Resetting to default settings
(see “Selecting further settings”)
––
Calling up information (model designation and serial
number) about your refrigeration appliance
(see “Selecting further settings”)
––
Switching on the reminder to change the
charcoal filter (see “Optional accessories”)
(see “Selecting further settings”)
Off
Switching Cleaning mode on or off
(see “Cleaning and care” and “Selecting further
settings”)
Off
Guide to the appliance
32
Selecting the desired function in Settings mode
Touch the OKsensor on the control panel.
appears in the display.
Use the or sensor to scroll to the symbol.
Touch OK.
Select the function you want using the or sensor.
Touch OK to select the function you want.
When the function is switched on, a dot appears in the upper corner of the
display
.
Touch OK to deselect a selected function.
When the function is switched off, the dot in the upper corner of the display goes
out.
Exiting Settings mode
Use the or sensor to scroll to the symbol.
Touch OK.
Use the or sensor to scroll to the symbol and touch OK.
Alternatively:
Wait approx. 15seconds after the last press of a sensor.
Settings mode is then exited automatically.
Guide to the appliance
33
Adjusting the interior fittings
Moving the door/bottle shelf
Only move the door/bottle shelves in
the appliance door when they are
empty.
Push the door/bottle shelf upwards,
then remove it by pulling it forwards.
Refit the door/bottle shelf at the
required height.
Clipping the egg trays on
Clip the egg trays onto the rear edge
of the door shelf.
Adjusting or removing the bottle
holder
The non-slip fins of the bottle holder
make bottles more secure when you
open and close the appliance door.
The bottle holder can be moved to the
left or right to create more room for
drink cartons.
The bottle holder can be removed
completely, e.g. for cleaning:
Pull the bottle holder up to remove it.
Moving the adjustable shelves
The shelves can be adjusted according
to the height of the food.
Raise the shelf slightly at the front
and pull it forwards a little.
Lift it until the notches at the side are
in line with the shelf supports. The
shelf can then be raised or lowered to
the required level.
Push the shelf in.
Stoppers prevent the shelves from
being dislodged by mistake.
The raised edge on the protective strip
at the back must face upwards to
prevent food from touching the back
wall of the appliance and freezing to it.
Guide to the appliance
34
Space for a baking tray
A baking tray can be placed above the
drawers. The baking tray can be no
more than 466mm wide, 386mm deep
and 50mm high.
Open the appliance door as far as it
will go.
Place the baking tray on the dividing
plate.
Useful tip: Let the baking tray cool
down to room temperature before
putting it in the refrigerator section.
Moving the charcoal filters
KKF-FF charcoal filters with holder
(Active AirClean) are available as
optional accessories (see “Optional
accessories”).
When you are storing very strong
smelling food (e.g. very ripe cheese):
- Place the holder with the charcoal
filters on the shelf where this food is
kept.
- Change the charcoal filters sooner if
necessary.
- Use more charcoal filters (with
holders) in the refrigeration appliance.
The holder for the charcoal filters sits
on the protective strip at the back of the
shelf.
To move the charcoal filters, pull the
holder upwards to remove it from the
protective strip.
Refit it on the protective strip of the
shelf you wish to use it on.
Guide to the appliance
35
Accessories supplied
For a description, see “Guide to the
appliance – Adjusting the interior
fittings”.
Egg tray
Bottle holder
Optional accessories
A range of useful Miele accessories and
care products is available for your
appliance.
Miele all purpose microfibre cloth
Light soiling and fingerprints on
stainless steel fronts, control panels
and furniture can be easily removed
with this microfibre cloth.
KKF-FF Active AirClean charcoal
filter with holder
The charcoal filter neutralizes
unpleasant odours in the refrigerator
section for improved air quality.
The charcoal filter holder clips onto the
protective strip at the back of the shelf
and can be moved as necessary.
KKF-RF replacement charcoal filters
(ActiveAirClean)
Replacement filters to fit the holder are
available. We recommend replacing the
charcoal filters every 6months.
Bottle rack
Bottles can be stored horizontally in the
refrigerator section using the bottle rack
to save space.
The bottle rack can be placed in
different positions in the refrigerator
section.
Organisation box
The organisation box makes it easier to
sort the food in the refrigerator section
drawer in a clear manner.
Depending on the model, you may
need to remove the entire drawer to
insert and remove the organisation
box.
Optional accessories can be ordered
from the Miele webshop. They can
also be ordered directly from Miele
(see end of this booklet for contact
details).
Switching on and off
36
Before using for the first time
Remove all packaging material and
protective film.
Clean the inside of the appliance and
the accessories (see “Cleaning and
care”).
Connecting the appliance
Connect the appliance to the
electricity supply as described in
"Electrical connection".
Mielewill then appear in the appliance
display, followed by.
Switching on the appliance
Open the appliance door.
Touch the OKsensor on the control
panel.
The appliance will start to cool and the
interior lighting will come on when the
door is opened.
The refrigeration appliance will adjust to
the preset temperature.
To enable the temperature to get
sufficiently cold inside the
refrigeration appliance, allow the
appliance to run for a few hours. Do
not place food in the refrigeration
appliance until it has reached the
preset temperature.
Switching off the appliance
Touch the OKsensor on the control
panel.
appears in the display.
Touch OK.
Use the sensor to scroll to the
symbol.
Touch OK.
appears in the display.
The cooling and interior lighting are
switched off.
Please note: the refrigeration
appliance is not disconnected from
the power supply when it is switched
off.
Switching on and off
37
Switching off for longer periods of
time
If, during a long absence, the
refrigeration appliance is switched off
but not cleaned and the door is left
shut, there is a danger of mould
building up inside the appliance.
It is essential to clean the appliance.
If the appliance is not going to be used
for a longer period of time, observe the
following:
Switch the appliance off.
Switch off at the wall and withdraw
the plug from the socket, or switch
off the mains circuit breaker.
Clean the refrigeration appliance and
leave the door ajar to air the
appliance and avoid odours building
up inside.
The correct temperature
38
It is very important to set the correct
temperature to ensure the shelf life of
food. Reducing the temperature
reduces the growth rate of
microorganisms. Food does not spoil as
quickly.
The temperature in the appliance will
rise:
- the more often the door is opened
and the longer it is kept open.
- the more food is stored in it.
- the warmer the food is which is being
put into it.
- the higher the ambient temperature
surrounding the refrigeration
appliance. This refrigeration
appliance is designed for use within
specific ambient temperatures
(climate range). Do not use it in
ambient temperatures for which it is
not designed.
... in the refrigerator section
We recommend a temperature of 4°C
in the refrigerator section.
The correct temperature
39
Temperature display
In normal operation, the temperature
display shows the current mean
temperature in the refrigerator.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this
temperature to then be shown
constantly in the display.
Setting the temperature
Touch the OKsensor on the control
panel.
appears in the display.
Touch OK.
Use the andsensors to change
the temperature.
Touch OK.
The temperature display will then
change back to the current temperature
in the refrigeration appliance.
Possible temperature settings
- Refrigerator section: 2to9°C
If you change the temperature
setting:
Check the temperature display after a
few hours. It will take this long for an
accurate reading to be given.
- Wait for approx.6hours if the
refrigeration appliance is not very full.
- Wait for approx.24hours if the
refrigeration appliance is full.
If, after this time, the temperature is still
too high or too low:
Adjust the temperature again.
Using SuperCool and DynaCool
40
SuperCool
When switched on, the SuperCool
function can be used to rapidly
reduce the temperature in the
refrigerator section to its lowest
setting (depending on the ambient
temperature). The refrigeration
appliance will work at full power and
lower the temperature. Select this
function for the rapid chilling of large
amounts of fresh food or drink.
When the SuperCool function is
switched on, the appliance may make
more noise than usual.
The SuperCool function should be
switched on immediately before
placing food or drinks in the
refrigerator section.
The SuperCool function will switch
itself off automatically after approx.
12hours. The appliance will then run
at normal power again.
Useful tip: To save energy, you can
manually switch off the SuperCool
function once food and drinks are
sufficiently chilled.
Switching SuperCool on and off
Touch the OKsensor on the control
panel.
appears in the display.
Touch OK.
Use the sensor to scroll to the
symbol.
Touch OK.
When the SuperCool function is
switched on, a dot appears in the
upper corner of the display
.
Using SuperCool and DynaCool
41
DynaCool
When the DynaCool function is not
switched on, the natural circulation of
air in the appliance will cause different
temperature zones in the fridge, as the
cold, heavy air will sink to the lowest
section of the appliance. Make use of
the different temperature zones when
placing food in the refrigerator (see
"Storing food in the refrigerator
section").
However, if you are storing a large
amount of similar food in the
refrigerator at any one time, e.g. after
your weekly shop, it is a good idea to
switch on DynaCool. This way you can
distribute the temperature on all the
adjustable shelves inside the
appliance more evenly so that all the
food in the refrigerator section will be
chilled to about the same degree.
The temperature can be set as usual
with the temperature control.
Also switch on the DynaCool
function when:
- the ambient temperature is high
(above approx. 35°C)
- the humidity levels are high (e.g. in
the summer)
The fan will always switch on
automatically when the compressor
switches on.
Useful tip: As the energy consumption
increases when DynaCool is
switched on, you should switch the
DynaCool function off again under
normal conditions.
To save energy, the fan switches off
automatically when the door is open.
Switching DynaCool on and off
Touch the OKsensor on the control
panel.
appears in the display.
Touch OK.
Use the sensor to scroll to the
symbol.
Touch OK.
When the DynaCool function is
switched on, a dot appears in the
upper corner of the display
.
Selecting further settings
42
Explanation of the different
settings
Only the settings that require further
explanation are described below.
The door alarm and other warnings
are automatically suppressed when
you are in Settings mode.
Party mode
The Party mode function is
particularly recommended for the
rapid chilling of large amounts of fresh
food or drink.
Useful tip: Switch on the Party mode
function approx. 4hours before
placing food and drinks in the
appliance.
When Party mode is switched on, the
DynaCool and SuperCool
functions are switched on automatically.
Party mode cannot be switched on
if Holiday mode is switched on.
The Party mode function will switch
itself off automatically after approx.
24hours. However, you can switch
the Party mode function off early at
any time.
Holiday mode
The Holiday mode function is
useful when you go on holiday, for
example, if you do not wish to switch
off the refrigerator section completely
or do not need a high degree of
cooling.
If Holiday mode is switched on, this
will be indicated in the start display.
The refrigerator section is regulated to a
temperature of 15°C. In this way, the
refrigerator section remains in operation
whilst saving energy.
Food which does not go off quickly
can be stored in the refrigeration
appliance for some time at this
moderate refrigerator temperature.
Energy consumption is lower than in
normal operation.
This also prevents the build-up of
odours and mould, which can occur if
the refrigerator section is switched off
and the appliance door is closed.
Health risk due to consumption
of spoiled food.
The shelf life and quality of food in
the refrigerator section may
deteriorate if the temperature
remains above 4°C for an extended
period.
Only ever switch on the Holiday
mode function for a limited
period.
Do not store any temperature-
sensitive food which goes off easily
such as fruit, vegetables, fish, meat
and dairy products during this time.
Selecting further settings
43
Switching the lock function/ on
When the lock function is switched on,
it protects the refrigeration appliance
from being switched off unintentionally
and being adjusted unintentionally by
unauthorised persons, e.g. children.
In Settings mode, use the or
sensor to scroll to the symbol.
Touch OK.
When the safety lock function is
switched on, a dot appears in the upper
corner of the display
.
Close the appliance door. The safety
lock function will now be activated.
Deactivating the lock function/
temporarily
If you want to adjust the temperature,
for example, you can deactivate the
safety lock function temporarily:
Touch OK.
will appear in the display.
Touch the OKsensor for approx.
6seconds.
will appear in the display.
Touch OK.
Now select the required settings.
Touch OK.
Closing the appliance door will
reactivate the safety lock function.
Switching the lock function/ off
completely
Touch OK.
will appear in the display.
Touch the OKsensor for approx.
6seconds.
will appear in the display.
Use the or sensor to scroll to the
symbol.
Touch OK.
Use the or sensor to scroll to the
symbol.
Touch OK.
When the safety lock function is
switched off, appears in the display.
Selecting further settings
44
Sabbath mode
The appliance offers a Sabbath mode
for the purpose of religious observance.
If Sabbath mode is switched on, this
will be indicated in the start display.
The display switches off after
3seconds.
When Sabbath mode is switched
on, you cannot adjust any settings on
your refrigeration appliance.
Ensure that the door is properly
closed, as visual and audible alarms
are switched off.
The Sabbath mode function will
switch off automatically after approx.
120hours.
When Sabbath mode is switched on,
the following are deactivated:
- The interior lighting when the door is
opened.
- All audible and visual signals.
- The temperature display.
All other functions switched on
previously remain activated.
Health risk due to consumption
of spoiled food.
As power failures are not indicated
while Sabbath mode is active,
food may be exposed to increased
temperatures for a certain period of
time. This shortens the shelf life of
the food.
If there is a power failure during
Sabbath mode, check the quality
of the food.
Switching Sabbath mode on
In Settings mode, use the or
sensor to scroll to the symbol.
Touch OK.
When the Sabbath mode function is
switched on, a dot appears in the upper
corner of the display
.
The display switches off after
3seconds.
Close the appliance door.
Switching Sabbath mode off
Touch the OKsensor.
will appear in the display.
Touch OK.
When the Sabbath mode function is
switched on, a dot appears in the upper
corner of the display
.
Touch OK.
When the Sabbath mode function is
switched off, the dot in the upper
corner of the display goes out.
Information on Sabbath mode
This product is certified by Star-K, an
international institute for kosher
certification.
You can find the Star-K certification
version here.
Changing the time before the door
alarm
is triggered
You can set how quickly the door alarm
should sound after an appliance door
has been opened.
In Settings mode, use the or
sensor to scroll to the
symbol.
Selecting further settings
45
Touch OK.
Use the andsensors to set the
time you want between 30seconds
and 3minutes: 30seconds.
Touch OK.
Changing the volume of the alarms
and buzzers/
You can change the volume of the
alarms and buzzers (e.g. in the event of
a door alarm or a fault message).
Alternatively, you can switch the alarms
and buzzers off if you find them
annoying.
In Settings mode, use the or
sensor to scroll to the symbol.
Touch OK.
Use the and sensors to select
the volume you want for alarms and
buzzers.
Touch OK.
When the alarms and buzzers are
switched off, will appear.
Selecting further settings
46
Adjusting the display brightness
You can adjust the display brightness to
the lighting conditions in the room.
In Settings mode, use the or
sensor to scroll to the symbol.
Touch OK.
Use the and sensors to select
the display brightness you want.
Touch OK.
Switching off Demo mode
Demo mode allows the refrigeration
appliance to be presented in the
showroom without the cooling system
being switched on. Do not activate this
setting for domestic use.
If Demo mode has been switched on
as a default setting, will appear in
the display when the refrigeration
appliance is switched on.
Touch the OKsensor on the control
panel.
Miele will appear initially in the display,
followed by the start screen.
Touch OK.
In Settings mode, use the or
sensor to scroll to the symbol.
Touch OK.
After Demo mode has been switched
off, the refrigeration appliance shuts
down and must be switched on again.
Resetting the settings to their factory
default settings
All settings made on the refrigeration
appliance will be reset to the factory
default settings (for settings, see “Guide
to the appliance”).
In Settings mode, use the or
sensor to scroll to the symbol.
Touch OK.
Use the sensor to scroll to the
symbol.
Touch OK.
The refrigeration appliance shuts down
and must be switched on again.
Information
Appliance data (model number and
serial number) is shown in the display.
Useful tip: This data is important when
reporting an appliance fault to Miele
(see “Service”).
Charcoal filter change indicator
After inserting the charcoal filter
(optional accessory), you must activate
the charcoal filter change indicator in
Settings mode.
The charcoal filter change indicator
in the start display will remind you to
replace the charcoal filter approx.
every 6months (see “Cleaning and
care – Replacing the charcoal filters”).
Selecting further settings
47
Cleaning mode
Cleaning mode makes it easier to
clean the refrigerator section (see
“Cleaning and care”). The interior
lighting remains switched on, even
though the refrigerator section is
switched off. The buzzer will stop and
the symbols in the display will also go
out.
If Cleaning mode is switched on,
this will be indicated in the start
display.
After cleaning, Cleaning mode must
be switched off. If the appliance door is
closed for more than 10minutes,
Cleaning mode switches itself off
automatically.
Door alarm
48
The refrigeration appliance is
equipped with a warning system to
avoid increased energy consumption
and food becoming warm if the
appliance door is left open.
If the appliance door is left open for a
longer period of time,
will appear in
the temperature display. An alarm tone
also sounds.
You can change the time before the
door alarm is triggered. However, the
door alarm can also be switched off
(see “Selecting further settings”).
The alarm will stop and
will go out
in the display as soon as the door is
closed.
Switching the door alarm off early
You can switch the alarm off early if you
wish.
Touch OK.
The alarm will stop and the
symbol
will go out.
If the appliance door is not closed, the
alarm will sound again after 3minutes.
Storing food in the refrigerator section
49
If there is insufficient air circulation,
the cooling performance will
decrease and energy consumption
will increase.
To allow air to circulate efficiently, do
not pack food too closely together in
the appliance.
Do not cover the fan in the rear wall
of the appliance.
Different storage zones
Due to the natural air circulation, there
are different temperature zones in the
refrigerator section.
Cold, heavy air sinks to the lowest
section of the refrigerator section. Make
use of the different zones when placing
food in the appliance.
This appliance has dynamic cooling,
which helps to keep an even
temperature when the fan is running.
The difference between the various
temperature zones is therefore less
pronounced.
Warmest area
The warmest area is located in the top
section of the main storage area and
the door. Use this for storing butter so
that it remains spreadable and for
cheese so that it retains its flavour.
Storing food in the refrigerator section
50
Coldest area
The coldest area in the refrigerator
section is directly above the DailyFresh
drawer and at the back of the
appliance.
A temperature setting of 4°C
combined with appropriate hygiene
measures delays the propagation of
bacteria, e.g. salmonella and listeria,
which can lead to serious food
poisoning.
Therefore, you should use these areas
to store all delicate and highly
perishable food, including:
- fish, meat, poultry
- sausage products, ready meals
- dishes or baked goods containing
eggs or cream
- fresh dough, cake mixtures, pizza or
quiche dough
- soft cheese and other dairy products
- pre-packed vegetables
- other fresh food (with a label stating it
should be kept at a temperature of
approx. 4°C)
Useful tip: Store food in such a way
that it does not touch the rear wall of
the refrigerator section. Otherwise it
could freeze to the rear wall.
Food which is not suitable for
storage in the refrigerator
Not all food is suitable for refrigeration
at temperatures below 5 °C because it
is sensitive to cold.
Foods which are sensitive to cold
include:
- Pineapples, avocados, bananas,
pomegranates, mangoes, melons,
papayas, passionfruit and citrus fruits
such as lemons, oranges,
mandarines, grapefruits
- Fruit (which is not yet ripe)
- Eggplants, cucumbers, potatoes,
capsicums, tomatoes, zucchini
- Hard cheeses, e.g. Parmesan,
mountain cheese
Notes on buying food
The freshness of the food when it is first
placed in the appliance is the most
important factor for how long it stays
fresh.
Take into account the use-by date and
the correct storage temperature.
Time out of the refrigerator, e.g.
transporting food in a warm car, should
be kept to a minimum.
Storing food in the refrigerator section
51
Storing food correctly
Ensure that food stored in the
refrigerator section is in packaging or
covered properly (some exceptions
apply in the DailyFresh drawer).
This will prevent food odours from
affecting other food, stop food from
drying out, and also prevent any cross-
contamination of bacteria. This is
particularly important when storing
meat products. Make sure that food
such as raw meat and fish in particular
does not come into contact with other
food.
By ensuring that the temperature
settings are correct and by taking
appropriate hygiene measures, you
can prolong the storage life of your
food considerably. This prevents
food waste.
Protein rich food
Please note that foods rich in protein
deteriorate faster than others. Shellfish,
for example, deteriorates faster than
fish, and fish deteriorates faster than
meat.
Storing food in the DailyFresh drawer
52
The DailyFresh drawer provides good
storage conditions for fruit and
vegetables.
The humidity level in the DailyFresh
drawer can be regulated to suit the food
being stored. Food retains its own
moisture if stored at a higher humidity
and does not dry out as quickly. The
temperature is approximately equivalent
to the temperature in the refrigerator
section
Remember that the freshness of the
food when first placed in the
appliance is the most important factor
in determining how long it will stay
fresh.
Adjusting the humidity level in the
DailyFresh drawer for fruit and
vegetables
The moisture level greatly depends on
the type and quantity of food being
stored, if stored unwrapped.
If the quantity of food being stored in
this compartment is small, the
humidity level may be too low.
Useful tip: If you are only storing a
small amount of food, wrap it in airtight
packaging.
Selecting low humidity
The appliance is delivered with
increased humidity and the
compartment cover pushed
backwards .
Only change this default setting if the
humidity level in the DailyFresh drawer
is too high:
Open the DailyFresh drawer.
Pull the compartment cover forwards
as far as it will go.
The compartment cover is open and the
humidity decreases .
Selecting increased humidity
Open the DailyFresh drawer.
Slide the compartment cover
backwards as far as it will go.
The compartment cover is closed and
the humidity remains in the
compartment.
Storing food in the DailyFresh drawer
53
Observe the following tips if you find that food you have stored does not keep
well (e.g. food becomes limp or wilts after only being stored for a short time):
Only place fresh food in the appliance. The initial condition of the food is crucial
to maintaining freshness.
Clean the DailyFresh drawer before storing food in it.
Dry the surface of very moist food before storing it.
Do not store food which is sensitive to cold in the DailyFresh drawer (see “Using
the refrigerator efficiently – Food which is not suitable for storage in the
refrigerator”).
Set the compartment cover to the correct position for the food being stored
(humidity not increased or humidity increased ).
An increased humidity level in the humidity-controlled compartment is
achieved with the moisture present in the food being stored if it is stored
unwrapped. The more food stored in the compartment, the higher the humidity.
If too much moisture collects in the compartment at the setting and the food
is affected, dry the floor and place a rack or similar item in the compartment so
that excess moisture can drip down. Alternatively, reduce the humidity by
pulling the compartment cover forwards.
If the humidity level is too low despite the setting, wrap the food in airtight
packaging.
Defrosting
54
Refrigerator section and
DailyFresh drawer
The refrigerator section and the
DailyFresh drawer defrost automatically.
Condensate and frost can build up on
the back wall of the refrigerator section
and the DailyFresh drawer whilst the
compressor is running. You do not need
to remove this.
The condensate drains through a
channel and drain hole into an
evaporation system at the back of the
refrigeration appliance. The warmth
generated by the compressor causes
the condensate to evaporate
automatically.
Keep the condensate channel and
drain hole clean to enable this.
Condensate must be able to drain
away unhindered at all times.
Cleaning and care
55
The data plate located inside the
refrigeration appliance must not be
removed. It contains information
which is required in the event of a
fault.
Do not let water get into the
electronic unit or the lighting.
Risk of damage due to moisture
ingress.
The steam from a steam cleaning
appliance can damage plastic parts
and electrical components.
Do not use a steam cleaning
appliance to clean the refrigeration
appliance.
Cleaning water must not get into the
drain hole.
Cleaning agents
Cleaning and conditioning agents
used in the interior of the
refrigeration appliance must be food
safe.
To avoid damaging the surfaces of your
appliance, do not use:
- cleaning agents containing soda,
ammonia, acid or chloride
- cleaning agents containing descaling
agents
- abrasive cleaning agents, e.g.
powder cleaners and cream cleaners
- solvent-based cleaning agents
- stainless steel cleaning agents
- dishwasher cleaners
- oven sprays
- glass cleaning agents
- hard, abrasive sponges and brushes,
e.g. pot scourers
- dirt eraser sponges
- sharp metal scrapers
We recommend using lukewarm water
with a little washing-up liquid to clean
the appliance.
Cleaning and care
56
Preparing the refrigeration
appliance for cleaning
Useful tip: Switch Cleaning mode
on. The cooling system in the
refrigerator section is switched off, but
the interior lighting remains switched
on.
In Settings mode, use the or
sensor to scroll to the symbol.
Touch OK.
When Cleaning mode is switched
on, a dot appears in the upper corner of
the display
.
If Cleaning mode is switched on,
this will be indicated in the start display.
The cooling system in the refrigerator
section is switched off, but the interior
lighting remains switched on.
Take any food out of the refrigeration
appliance and store it in a cool place.
Take out any removable accessories
for cleaning (see “Removing,
dismantling, and cleaning
accessories”).
Cleaning the interior of the
machine
Clean the appliance regularly, or at
least once a month.
If soiling is left on for any length of
time, it may become impossible to
remove under certain circumstances.
Surfaces may suffer discolouration or
damage.
Remove any soiling immediately.
Clean the interior with a clean
sponge, lukewarm water and a little
washing-up liquid.
After cleaning, wipe with a damp
cloth and dry with a soft cloth.
Clean the condensate channel and
drain hole frequently using a cotton
swab or similar item to ensure that
condensate can drain away freely.
Leave the door open to air the
refrigeration appliance sufficiently for
a short while and to prevent odour
build-up.
Cleaning and care
57
Cleaning accessories by hand
or in the dishwasher
The following components must be
cleaned by hand only:
- the stainless steel-look trim
- the protective strips at the back of
the adjustable shelves
- Adjustable shelf with printing.
- All drawers and compartment covers
(these vary depending on model).
- the flexible bottle rack (available as
an optional accessory).
- Organisation box (available as an
optional accessory)
The following components are
dishwasher-safe:
Risk of damage due to high
dishwasher temperatures.
Parts of the refrigeration appliance
may become unusable, e.g. deform,
if they are washed in the dishwasher
at more than 55°C.
For dishwasher-safe components,
always select dishwasher programs
with a maximum temperature of
55°C.
Contact with natural dyes from
carrots, tomatoes, and ketchup, etc.
may discolour the plastic parts in the
dishwasher. This discolouration does
not affect the stability of the parts.
- Bottle holder, egg tray.
- the door and bottle shelves in the
appliance door (without stainless
steel-look trim)
- The adjustable shelves (with the
strips removed and without the
printing).
- The holder for the charcoal filter
(optional accessory).
Removing and dismantling
accessories for cleaning
Dismantling the door shelf/bottle
shelf
Remove the trim in stainless steel-look
before cleaning the door shelf/bottle
shelf in the dishwasher.
To remove the trim, proceed as follows:
Place the door shelf/bottle shelf on
the worktop.
Pull the trim off the shelf, beginning at
one side.
After cleaning the door shelf/bottle
shelf, reattach the trim.
Cleaning and care
58
Dismantling an adjustable shelf
Before cleaning an adjustable shelf,
remove the stainless steel strip and the
protective strip at the back of the shelf.
Proceed as follows:
Place the shelf on a worktop covered
with a soft material (e.g. a tea towel).
Pull the stainless steel strip off the
shelf beginning at one side.
Pull the protective strip off.
After cleaning the shelf, reattach the
stainless steel strip and the protective
strip.
Removing a drawer
Lift the drawer at the front and pull it
out.
After cleaning, slide the drawer back
in again.
Removing the dividing plate
Remove the dividing plate.
After cleaning, slide the dividing plate
back in again.
Removing the compartment cover
Lift the cover at the front and pull it
out.
After cleaning, slide the compartment
cover back in again.
Cleaning and care
59
Replacing the charcoal filters
(optional accessories)
Replace the charcoal filters in the
holder every 6months.
The symbol in the start display
reminds you that the charcoal filter
needs to be changed.
Replacement KKF-RF charcoal filters
can be obtained from Miele or the
Miele online shop.
Pull the charcoal filter holder upwards
to remove it from the shelf.
When in position, the charcoal filters
must not touch the back wall of the
appliance as the moisture could
cause them to stick to the back wall.
Insert the new charcoal filters into
the holder far enough so that they do
not protrude over the edge of the
holder.
Remove both charcoal filters and
place the new filters with the
surrounding edge pointing
downwards in the holder.
Place the holder in the middle of the
protective strip at the back of any
adjustable shelf so that it clicks into
position.
Touch the OKsensor to confirm that
the filters have been replaced.
The change charcoal filters indicator will
go out and the counter is reset.
The symbol will go out in the start
display.
Cleaning and care
60
Cleaning the front of the
appliance and the side panels
If soiling is left on for any length of
time, it may become impossible to
remove. Surfaces may suffer
discolouration or damage.
Therefore it is best to remove soiling
from the appliance doors and side
panels immediately.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or
discolour the surfaces.
See the information on “Cleaning
agents” at the beginning of this
section.
Clean the surfaces with a clean
sponge and a solution of warm water
and washing-up liquid. A clean, damp
microfibre cloth without cleaning
agent can also be used.
After cleaning, wipe with clean water
and dry with a soft cloth.
CleanSteel (edt/cs) – appliance front
Risk of damage due to incorrect
cleaning.
The surface coating will be
damaged.
Do not use a stainless steel
cleaning agent on this surface.
The appliance front has a high quality,
special finish. It is resistant to soiling
and easy to clean.
Cleaning the door seal
Risk of damage due to incorrect
cleaning.
If you treat the door seals with oils or
grease, they can become porous.
Do not use any oils or grease on the
door seals.
The door seal should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the
energy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele Vacuum Cleaner dusting
brush, for example).
Cleaning and care
61
After cleaning
Touch the OKsensor on the control
panel.
will appear in the display.
Touch OK.
When Cleaning mode is switched
off, the dot in the upper corner of the
display goes out.
Use the and sensors to scroll to
the symbol and touch OK.
The refrigeration appliance will start
cooling again.
Refit all shelves and accessories in
the appliance.
Switch on the SuperCool function
for a while so that the temperature
inside the refrigeration appliance
drops quickly.
Place food in the refrigeration
appliance as soon as it reaches the
required coldness.
Close the appliance door(s).
Problem solving guide
62
Many malfunctions and minor faults that can occur in daily operation can be
corrected without contacting Miele. This will save you time and money because
you will not need a service call.
You can find information on how to remedy faults yourself at www.miele.com/
service.
Please note, however, that a call-out charge will be applied to unnecessary service
visits where the problem could have been rectified as described in these operating
instructions.
To prevent cold from escaping, avoid opening the appliance door until the fault
has been corrected.
Problem Possible cause and remedy
The refrigeration
appliance is not getting
cold and the interior
lighting does not come
on when the appliance
door is opened.
The refrigeration appliance is not switched on and
the symbol is lit up in the display.
Switch the appliance on.
The plug is not properly inserted into the socket or
the socket is not switched on.
Insert the plug into the socket correctly and switch
on. If the refrigeration appliance is switched off,
will appear in the display.
The mains circuit breaker has tripped. There could be
a fault with the refrigeration appliance, the household
electrical wiring or another electrical appliance.
Contact a qualified electrician or Miele.
The compressor runs
continuously.
This is not a fault. To save energy, the compressor
runs at a lower speed when less cooling is required.
This increases the running time of the compressor.
The compressor is
switching on more
frequently and for
longer periods of time.
The temperature in the
appliance is too low.
The ventilation gaps are covered or have become too
dusty.
Do not block the ventilation gaps.
Clean the dust from the ventilation gaps on a
regular basis.
The appliance door has been opened too frequently.
A large amount of fresh food has been placed in the
appliance.
Only open the door when necessary and for as
short a time as possible.
Problem solving guide
63
Problem Possible cause and remedy
After a while, the temperature will return to normal by
itself.
The door is not properly closed.
Close the appliance door.
After a while, the temperature will return to normal by
itself.
The ambient temperature is too high. The higher the
ambient temperature, the longer the compressor
runs.
See the information in "Installation - Installation
location".
The appliance was not properly installed in the niche.
Install the refrigeration appliance in the niche as
described in the installation instructions supplied
with it.
The temperature setting is too low.
Correct the temperature setting.
The SuperCool function is still switched on.
Switch off the SuperCool function earlier to
save energy.
The compressor comes
on less and less often
and for shorter periods
of time. The
temperature in the
appliance rises.
This is not a fault. The temperature is too high.
Correct the temperature setting.
Check the temperature again after 24hours.
Ice or condensation has
built up inside the
refrigeration appliance.
The appliance door may
not close correctly.
The door seal has come out of its groove.
Check that the door seal is correctly seated in the
groove.
The door seal is damaged.
Check if the door seal is damaged.
The door seal is
damaged and needs to
be replaced.
No tools are required to change the door seal.
Change the door seal. A replacement is available
from Miele.
Problem solving guide
64
Other problems
Problem Possible cause and remedy
The floor of the
refrigerator is wet.
The condensate drain hole is blocked.
Clean the condensate channel and drain hole.
There is no audible
alarm even though the
door has been open for
a long time.
This is not a fault. The alarm has been switched off in
Settings mode. If you want to switch the audible
alarm back on again:
In Settings mode, use the or sensor to
scroll to the symbol.
Touch OK.
Use the and sensors to select the volume you
want for alarms and buzzers.
Touch OK.
When the alarms and buzzers are switched on,
will appear.
Problem solving guide
65
Messages in the display
Message Possible cause and remedy
lights up in the
display, the
refrigeration
appliance does
not get cold even
though the
controls and the
interior lighting
are working.
Demo mode has been activated.
Touch OK.
Miele will appear initially in the display, followed by
the start screen.
Touch OK.
In Settings mode, use the or sensor to
scroll to the symbol.
Touch OK.
After Demo mode has been switched off, the
refrigeration appliance shuts down and must be
switched on again.
is lit up in the
display and the
refrigeration
appliance cannot
be used.
The Cleaning mode function is still switched on.
Touch the OKsensor on the control panel to
switch off Cleaning mode.
will appear in the display.
Touch OK.
When Cleaning mode is switched off, the dot in
the upper corner of the display goes out.
Use the or sensor to scroll to the symbol
and touch OK.
The refrigeration appliance will start cooling again.
Nothing is visible in the
display. The display is
dark.
Sabbath mode is switched on: the interior lighting
is switched off and the refrigeration appliance is
cooling down.
Touch OK.
will appear in the display.
Touch OK.
When the Sabbath mode function is switched on, a
dot appears in the upper corner of the display
.
Touch OK.
When the Sabbath mode function is switched off,
the dot in the upper corner of the display goes out.
Problem solving guide
66
Message Possible cause and remedy
is lit up in the
display and the
refrigeration
appliance cannot
be used.
The lock function has been activated.
Unlock the refrigeration appliance temporarily or
switch the lock function off completely (see
“Selecting further settings – Deactivating the lock
function/ temporarily/switching off
completely”).
The symbol lights up
in the start display and
a buzzer also sounds.
The charcoal filter change indicator in the start
display reminds you that the charcoal filter needs to
be changed.
Replace the charcoal filter in the holder (see
“Cleaning and care – Replacing the charcoal filters
(optional accessory)”) and confirm that the
charcoal filter has been replaced by touching the
OKsensor.
The symbol will go out in the start display.
lights up in the
display and an alarm
also sounds.
The door alarm has been activated.
Touch OK.
The alarm will stop and the
symbol will go out.
Close the appliance door.
Problem solving guide
67
Message Possible cause and remedy
lights up in the
display and a
fault code F with
numbers may
appear. An alarm
tone also sounds.
There is a fault.
Switch the alarm off by touching OK.
Call Miele.
To report the fault, you need the fault code and also
the model designation and serial number of your
refrigeration appliance. You can access this
information in the display.
Touch OK.
The appliance data required will be shown in the
display.
Touch OK.
To exit the information display, use the or
sensor to scroll to the symbol.
To switch off the refrigeration appliance, use the
or sensor to scroll to the symbol.
Touch OK.
There is an appliance fault: this display always has
priority over any settings which have just been
selected.
An appliance fault has priority over any current door
and/or temperature alarms in the display.
Problem solving guide
68
The interior lighting is not working.
Risk of electric shock due to exposed, live electrical components!
When removing the lighting cover, there is a risk of coming into contact with live
electrical components.
Do not remove the lighting cover. The LED lighting must only be repaired or
replaced by a qualified technician.
Danger of injury from LED lighting.
This lighting corresponds to risk group RG2. If the cover is defective, there is a
risk of eye injury.
Do not look from a close range directly into the lighting with optical instruments
(e.g. magnifying glass or similar).
Problem Possible cause and remedy
The interior lighting is
not working.
The refrigeration appliance is not switched on.
Switch the appliance on.
Sabbath mode is switched on: the display is black
and the refrigeration appliance is cooling.
Touch OK.
will appear in the display.
Touch OK.
When the Sabbath mode function is switched on, a
dot appears in the upper corner of the display
.
Touch OK.
When the Sabbath mode function is switched off,
the dot in the upper corner of the display goes out.
To avoid overheating, the interior lighting switches
itself off automatically after approx. 15minutes if the
door is left open. If this is not the case, there is a
fault.
Call Miele.
Noises
69
Normal
noises
What causes them
Brrrrr ... A humming noise is made by the compressor. This noise can
get louder for brief periods when the compressor switches on.
Blubb,
blubb ...
A gurgling noise can be heard when refrigerant is circulating
through the pipes.
Click ... Clicking sounds occur whenever the thermostat switches the
compressor on or off.
Crack ... A cracking sound can be heard when materials expand inside
the appliance.
Please bear in mind that the noise of the compressor and the coolant circulating
in the system is unavoidable.
Noises Possible cause and remedy
Rattling,
vibrating,
clinking
The refrigeration appliance is uneven. Realign the appliance
using a spirit level. Do so by raising or lowering the adjustable
feet underneath the refrigeration appliance.
The refrigeration appliance is touching another appliance or
piece of furniture. Move it away.
Drawers, baskets or shelves are jiggling or are stuck. Check all
removable items and refit them correctly.
Bottles or containers are touching. Separate them.
Service
70
You can find information on how to
remedy faults yourself and about
Miele spare parts at www.miele.com/
service.
Contact in case of fault
In the event of any faults which you
cannot remedy yourself, please contact
Miele.
You can book a Miele customer
service call-out online at
www.miele.com.au/service or
www.miele.co.nz/service.
Contact information for Miele can be
found at the end of this booklet.
Please quote the model and serial
number of your appliance when
contacting Miele. This information can
be found on the data plate.
The data plate is located inside the
refrigeration appliance.
Displaying appliance
information
This can be found in Settings mode
under Information (see “Selecting
further settings”) or on the data plate
inside the refrigeration appliance.
Warranty
The manufacturer's warranty for this
appliance is 2years.
For more information about country-
specific warranty terms and conditions,
please contact Miele.
Miele Head Office Melbourne:
Level 4, 141 Camberwell Road
Hawthorn East, VIC 3123
Miele Experience Centre South Melbourne:
206-210 Coventry Street
South Melbourne, VIC 3205
Miele Experience Centre and Office Sydney:
3 Skyline Place
Frenchs Forest, NSW 2086
Miele Experience Centre and Office Brisbane:
Tenancy 4C, 63 Skyring Terrace
Newstead, QLD 4006
Miele Experience Centre and Office Perth:
83-85 Sir Donald Bradman Drive
Hilton, SA 5033
Miele Experience Centre and Office Adelaide:
Miele Australia Pty. Ltd. Miele New Zealand Limited
Miele Global Headquarters
Germany
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
Federal Republic of Germany
IRD 98 463 631
ACN 005 635 398
ABN 96 005 635 398
Miele Experience Centre Gold Coast:
131 Ferry Road
Southport, QLD 4215
Miele Experience Centre
and Head Office Auckland:
8 College Hill
Freemans Bay, Auckland 1011
Miele Experience Centre
Wellington:
183 Featherston Street
Wellington 6011
0800 464 353 (0800 4 MIELE)
www.miele.co.nz
205-207 Stirling Highway
Claremont, WA 6010
1300 464 353 (1300 4 MIELE)
www.miele.com.au
Miele Experience Centre Doncaster:
1136/7 Doncaster Shopping Centre
619 Doncaster Rd, Doncaster, VIC 3108
M.-Nr. 12 124 620 / 00en - AU, NZ
KS 4383 ED edt/cs
